1. Important: Please help us to clean up our database of mods. Mods that don't contain any files but just txt files or advertising posts can be reported for removal. Thank you.

RasmusP's LUT Guide for G27/29 and DFGT 1.1

My custom LUTs for the Logitech G27, G29 and Driving Force GT

  1. RasmusP
    Hi!
    After my G27 Guide seems to help a LOT of drivers to finally get satisfied with their Logitech wheel in Assetto Corsa but most of them preferring my LUT-Configuration, I decided to create a little Guide only with the LUT-Configuration.
    Easy, simple, quick :)

    Here is the Link to the full Guide with all the different settings explained etc.:
    http://www.racedepartment.com/threads/guide-for-g27-and-other-wheels-configuration.134490/

    Now for the LUT-Configuration: (I will just provide MY favorite settings with *4 LUTs for G25/G27/G29 and 1 for the DFGT. If you want to customize them, please read and ask in the guide-thread linked above :) )

    Important: the first two values are the most important ones to get rid of the deadzone. If your wheel is shaking when standing still or vibrating too much:
    Lower the first value (0|0.120) to maybe 0|0.100. This first value is NOT influenced by the overall ffb from the game! The game ffb starts at the second value!
    Hope this helps :)


    1. Adjust InGame-settings and Profiler (ignore the NOT 900°... It's just to match the rotation of the real and visual wheel)
    AC_InGame_Settings.JPG AC_InGame_Settings_degrees.JPG Profiler.JPG

    2. Open the controls.ini:
    you find this ini in: "C:\Users\%username%\Documents\Assetto Corsa\cfg\controls.ini"
    set MIN_FF=0.00, CENTER_BOOST_GAIN=0.0, CENTER_BOOST_RANGE=0.1 (range doesn't matter if gain=0.0)
    controlsINI.JPG

    3.
    open the assetto_corsa.ini:
    you find this ini in: "%...%\SteamLibrary\steamapps\common\assettocorsa\system\cfg\assetto_corsa.ini"
    set ENABLE_GYRO=0, DAMPER_MIN_LEVEL=0.0, DAMPER_GAIN=0.0
    assetto_corsaINI.JPG

    4.
    open the ff_post_process.ini
    you find this ini in: "C:\Users\%username%\Documents\Assetto Corsa\cfg\ff_post_process.ini"
    set VERSION=1, TYPE=LUT, ENABLED=1, VALUE=1.0, Curve=%nameOfYourLutFile%

    This enables the LUT. If the Value is NOT 1.0 the LUT won't work as it should!
    ff_post_processINI.JPG

    5.
    put the LUT into the same folder as the ff_post_process.ini!
    ["C:\Users\%username%\Documents\Assetto Corsa\cfg\"

    5. HAVE FUN

    6. additional:
    - Logitech Profiler:
    - overall: 100 (don't raise this! you will get crazy rattling!)
    - spring: 0 (doesn't do anything in AC)
    - damper: 0 (only active while standing still or rolling slowly)
    - untick center spring, NO combined pedals, 900° rotation, TICK "allow game to adjust settings"

    - AC InGame: [updated values!]
    - Gain: 100% (75-125% In the CAR) [50% with the "recommended" LUT]
    - Filter:
    0
    - Min Force: 0%
    - kerb: 1-5% (unnecessary vibrations)
    - road: 2-10% (5% is enough to give you some subtle vibrations on surface changes)
    - slip: 23% (important to feel spinning or locking wheels!)
    - abs: 23%
    - understeer: untick (unrealistic, only good for learning)
    - Steering Settings: gamma 1, filter 0, sensivity 0!!

    [Assetto_corsa.ini:]
    - DAMPER_MIN_LEVEL=0.0: This means, that the InGame dampening (a few versions ago there was a slider?!) is OFF, when the Engine says the damper to be zero. If you increase this settings, your dampening will ALWAYS BE ON, even if the engine does NOT give the input for it.
    The G27 delivers already very few details so you don't want anything to be dampened!

    - DAMPER_GAIN=0.0: I don't like it! It's only active when standing still or slow rolling but it sounds awful with the Logitech wheels and is just annoying in my opinion.

    Here are my LUTs :)
    They are all in the attached zip-file!
    I'm using the "recommended, no clip but stronger" LUT. It vibrates a little even when standing still but that's the price for the smoothest and tightest feeling with the G27!
    BUT you will have to lower the "Gain" in the Advanced section of the wheel options to 50%!
    0.00|0.10
    0.01|0.12
    0.02|0.16
    0.03|0.19
    0.04|0.22
    0.05|0.24
    0.06|0.26
    0.07|0.28
    0.08|0.30
    0.09|0.31
    0.10|0.33
    0.11|0.34
    0.12|0.36
    0.13|0.37
    0.14|0.38
    0.15|0.40
    0.16|0.41
    0.17|0.42
    0.18|0.43
    0.19|0.45
    0.20|0.46
    0.21|0.47
    0.22|0.49
    0.23|0.50
    0.24|0.51
    0.25|0.53
    0.26|0.54
    0.27|0.55
    0.28|0.56
    0.29|0.58
    0.30|0.59
    0.31|0.60
    0.32|0.62
    0.33|0.63
    0.34|0.64
    0.35|0.66
    0.36|0.67
    0.37|0.68
    0.38|0.69
    0.39|0.71
    0.40|0.72
    0.41|0.73
    0.42|0.75
    0.43|0.76
    0.44|0.77
    0.45|0.79
    0.46|0.80
    0.47|0.81
    0.48|0.82
    0.49|0.84
    0.50|0.85
    0.51|0.86
    0.52|0.88
    0.53|0.89
    0.54|0.90
    0.55|0.92
    0.56|0.93
    0.57|0.94
    0.58|0.95
    0.59|0.97
    0.60|0.98
    0.61|0.99
    0.62|1.01
    0.63|1.02
    0.64|1.03
    0.65|1.05
    0.66|1.06
    0.67|1.07
    0.68|1.08
    0.69|1.10
    0.70|1.11
    0.71|1.12
    0.72|1.14
    0.73|1.15
    0.74|1.16
    0.75|1.18
    0.76|1.19
    0.77|1.20
    0.78|1.21
    0.79|1.23
    0.80|1.24
    0.81|1.25
    0.82|1.27
    0.83|1.28
    0.84|1.29
    0.85|1.31
    0.86|1.32
    0.87|1.33
    0.88|1.34
    0.89|1.36
    0.90|1.37
    0.91|1.38
    0.92|1.40
    0.93|1.41
    0.94|1.42
    0.95|1.44
    0.96|1.45
    0.97|1.46
    0.98|1.47
    0.99|1.49
    1.00|1.50

    0|0.120
    0.01|0.120
    0.02|0.135
    0.03|0.159
    0.04|0.182
    0.05|0.202
    0.06|0.219
    0.07|0.232
    0.08|0.244
    0.09|0.252
    0.1|0.260
    0.11|0.268
    0.12|0.276
    0.13|0.285
    0.14|0.293
    0.15|0.301
    0.16|0.309
    0.17|0.318
    0.18|0.326
    0.19|0.334
    0.2|0.342
    0.21|0.350
    0.22|0.359
    0.23|0.367
    0.24|0.375
    0.25|0.383
    0.26|0.392
    0.27|0.400
    0.28|0.408
    0.29|0.416
    0.3|0.424
    0.31|0.433
    0.32|0.441
    0.33|0.449
    0.34|0.457
    0.35|0.466
    0.36|0.474
    0.37|0.482
    0.38|0.490
    0.39|0.498
    0.4|0.507
    0.41|0.515
    0.42|0.523
    0.43|0.531
    0.44|0.540
    0.45|0.548
    0.46|0.556
    0.47|0.564
    0.48|0.572
    0.49|0.581
    0.5|0.589
    0.51|0.597
    0.52|0.605
    0.53|0.614
    0.54|0.622
    0.55|0.630
    0.56|0.638
    0.57|0.646
    0.58|0.655
    0.59|0.663
    0.6|0.671
    0.61|0.679
    0.62|0.688
    0.63|0.696
    0.64|0.704
    0.65|0.712
    0.66|0.720
    0.67|0.729
    0.68|0.737
    0.69|0.745
    0.7|0.753
    0.71|0.762
    0.72|0.770
    0.73|0.778
    0.74|0.786
    0.75|0.794
    0.76|0.803
    0.77|0.811
    0.78|0.819
    0.79|0.827
    0.8|0.836
    0.81|0.844
    0.82|0.852
    0.83|0.860
    0.84|0.868
    0.85|0.877
    0.86|0.885
    0.87|0.893
    0.88|0.901
    0.89|0.910
    0.9|0.918
    0.91|0.926
    0.92|0.934
    0.93|0.942
    0.94|0.951
    0.95|0.959
    0.96|0.967
    0.97|0.975
    0.98|0.984
    0.99|0.992
    1|1.000

    0|0.080
    0.01|0.124
    0.02|0.160
    0.03|0.192
    0.04|0.218
    0.05|0.242
    0.06|0.264
    0.07|0.284
    0.08|0.300
    0.09|0.313
    0.1|0.326
    0.11|0.336
    0.12|0.347
    0.13|0.356
    0.14|0.364
    0.15|0.371
    0.16|0.378
    0.17|0.386
    0.18|0.393
    0.19|0.401
    0.2|0.408
    0.21|0.415
    0.22|0.423
    0.23|0.430
    0.24|0.438
    0.25|0.445
    0.26|0.452
    0.27|0.460
    0.28|0.467
    0.29|0.475
    0.3|0.482
    0.31|0.489
    0.32|0.497
    0.33|0.504
    0.34|0.512
    0.35|0.519
    0.36|0.526
    0.37|0.534
    0.38|0.541
    0.39|0.549
    0.4|0.556
    0.41|0.563
    0.42|0.571
    0.43|0.578
    0.44|0.586
    0.45|0.593
    0.46|0.600
    0.47|0.608
    0.48|0.615
    0.49|0.623
    0.5|0.630
    0.51|0.637
    0.52|0.645
    0.53|0.652
    0.54|0.660
    0.55|0.667
    0.56|0.674
    0.57|0.682
    0.58|0.689
    0.59|0.697
    0.6|0.704
    0.61|0.711
    0.62|0.719
    0.63|0.726
    0.64|0.734
    0.65|0.741
    0.66|0.748
    0.67|0.756
    0.68|0.763
    0.69|0.771
    0.7|0.778
    0.71|0.785
    0.72|0.793
    0.73|0.800
    0.74|0.808
    0.75|0.815
    0.76|0.822
    0.77|0.830
    0.78|0.837
    0.79|0.845
    0.8|0.852
    0.81|0.859
    0.82|0.867
    0.83|0.874
    0.84|0.882
    0.85|0.889
    0.86|0.896
    0.87|0.904
    0.88|0.911
    0.89|0.919
    0.9|0.926
    0.91|0.933
    0.92|0.941
    0.93|0.948
    0.94|0.956
    0.95|0.963
    0.96|0.970
    0.97|0.978
    0.98|0.985
    0.99|0.993
    1|1.000

    0|0.070
    0.01|0.100
    0.02|0.133
    0.03|0.159
    0.04|0.182
    0.05|0.202
    0.06|0.219
    0.07|0.232
    0.08|0.244
    0.09|0.252
    0.1|0.260
    0.11|0.268
    0.12|0.276
    0.13|0.285
    0.14|0.293
    0.15|0.301
    0.16|0.309
    0.17|0.318
    0.18|0.326
    0.19|0.334
    0.2|0.342
    0.21|0.350
    0.22|0.359
    0.23|0.367
    0.24|0.375
    0.25|0.383
    0.26|0.392
    0.27|0.400
    0.28|0.408
    0.29|0.416
    0.3|0.424
    0.31|0.433
    0.32|0.441
    0.33|0.449
    0.34|0.457
    0.35|0.466
    0.36|0.474
    0.37|0.482
    0.38|0.490
    0.39|0.498
    0.4|0.507
    0.41|0.515
    0.42|0.523
    0.43|0.531
    0.44|0.540
    0.45|0.548
    0.46|0.556
    0.47|0.564
    0.48|0.572
    0.49|0.581
    0.5|0.589
    0.51|0.597
    0.52|0.605
    0.53|0.614
    0.54|0.622
    0.55|0.630
    0.56|0.638
    0.57|0.646
    0.58|0.655
    0.59|0.663
    0.6|0.671
    0.61|0.679
    0.62|0.688
    0.63|0.696
    0.64|0.704
    0.65|0.712
    0.66|0.720
    0.67|0.729
    0.68|0.737
    0.69|0.745
    0.7|0.753
    0.71|0.762
    0.72|0.770
    0.73|0.778
    0.74|0.786
    0.75|0.794
    0.76|0.803
    0.77|0.811
    0.78|0.819
    0.79|0.827
    0.8|0.836
    0.81|0.844
    0.82|0.852
    0.83|0.860
    0.84|0.868
    0.85|0.877
    0.86|0.885
    0.87|0.893
    0.88|0.901
    0.89|0.910
    0.9|0.918
    0.91|0.926
    0.92|0.934
    0.93|0.942
    0.94|0.951
    0.95|0.959
    0.96|0.967
    0.97|0.975
    0.98|0.984
    0.99|0.992
    1|1.000

    0.00|0.100
    0.01|0.115
    0.02|0.135
    0.03|0.162
    0.04|0.179
    0.05|0.196
    0.06|0.213
    0.07|0.230
    0.08|0.246
    0.09|0.263
    0.10|0.279
    0.11|0.295
    0.12|0.311
    0.13|0.327
    0.14|0.342
    0.15|0.358
    0.16|0.373
    0.17|0.388
    0.18|0.403
    0.19|0.417
    0.20|0.432
    0.21|0.446
    0.22|0.460
    0.23|0.474
    0.24|0.488
    0.25|0.501
    0.26|0.514
    0.27|0.528
    0.28|0.541
    0.29|0.553
    0.30|0.566
    0.31|0.579
    0.32|0.591
    0.33|0.603
    0.34|0.615
    0.35|0.627
    0.36|0.638
    0.37|0.649
    0.38|0.661
    0.39|0.672
    0.40|0.682
    0.41|0.693
    0.42|0.703
    0.43|0.714
    0.44|0.724
    0.45|0.734
    0.46|0.743
    0.47|0.753
    0.48|0.762
    0.49|0.772
    0.50|0.781
    0.51|0.789
    0.52|0.798
    0.53|0.807
    0.54|0.815
    0.55|0.823
    0.56|0.831
    0.57|0.839
    0.58|0.846
    0.59|0.854
    0.60|0.861
    0.61|0.868
    0.62|0.875
    0.63|0.881
    0.64|0.888
    0.65|0.894
    0.66|0.900
    0.67|0.906
    0.68|0.912
    0.69|0.917
    0.70|0.923
    0.71|0.928
    0.72|0.933
    0.73|0.938
    0.74|0.942
    0.75|0.947
    0.76|0.951
    0.77|0.955
    0.78|0.959
    0.79|0.963
    0.80|0.967
    0.81|0.970
    0.82|0.973
    0.83|0.976
    0.84|0.979
    0.85|0.982
    0.86|0.984
    0.87|0.987
    0.88|0.989
    0.89|0.991
    0.90|0.992
    0.91|0.994
    0.92|0.995
    0.93|0.997
    0.94|0.998
    0.95|0.998
    0.96|0.999
    0.97|1.000
    0.98|1.000
    0.99|1.000
    1.00|1.000
    Alexium, Unbiased, Andy_W and 8 others like this.

Recent Reviews

  1. Warren Dawes
    Warren Dawes
    5/5,
    Version: 1.1
    Thanks for this Rasmus, my old G27 was never feeling right with AC, but with this LUT (recommended one), I'm much happier.
    Cheers, Warren
  2. Alexium
    Alexium
    5/5,
    Version: 1.1
    Thank you very much for your DFGT LUT! It is nice feeling on my wheel. Unfortunately my DFGT still have "center" notch. Or something like two rolls around current center. It may be not the true wheel center. I think it is mostly hardware issue with motors/wheel friction. But it disappearing with default settings with that sets low powers at center. In same time (in comparison my old "107" settings) your LUT is more soft. I like it! No more loud kerbs! I did only one modification of your LUT - removed light tremor when car is not moving (most first value - 0 | 0). I can't feel the difference in 0|0.070 and 0|0 settings. So I prefer not shaky wheel.
    1. RasmusP
      Author's Response
      Thanks for the stars and feedback!
      If the notch goes away with default settings you have too much force around the center. For me the notch also comes back when you remove the "tremor" as you call it. The wheel motors lose the "constant little energy" and you feel that hole then.
      I'd suggest you put the tremor back in and just reduce the overall force feedback until the tremor and the notch fade away. That's what I always do with Numpad +/- for each car. + until the deadzone vanishes or - until the notch fades away :)
  3. ladose
    ladose
    5/5,
    Version: 1.1
    Thank you for your explanations. I finally solved my vibration problem in the dead zone. Excelent guide, which I will recommend to other drivers.
    1. RasmusP
      Author's Response
      Glad you can enjoy your driving again now! :)
  4. Freud83
    Freud83
    5/5,
    Version: 1.1
    Thank you for shared your work, i use the lut since 3 months, and the ffb of my g27 feel smooth even in the center with accuracy, for better transitions between left and right corner, case of chicanes.
    1. RasmusP
      Author's Response
      Thank you for the review :)
      Chicanes bothered me the most before I created these, glad you like it too!
  5. Arconian
    Arconian
    5/5,
    Version: 1.1
    I haven't been playing AC for more than 2 years just because oscillations were driving me nuts. Now it's playable again! Awesome work man, thanks a lot!
    1. RasmusP
      Author's Response
      Thanks for taking the effort to write a review! Great to hear that you can enjoy AC again! :)
  6. Goldtop
    Goldtop
    5/5,
    Version: 1.1
    Game changer for me. After all these years of scratching my head trying to work out ffb in AC I now have the feel that was always missing with my DFGT. Thank you so much!
    1. RasmusP
      Author's Response
      Thanks for the review! Glad that you can enjoy the game now! :)
      The Logitech wheels might be cheap and AC at default really shows it, sadly, but I'm always astonished how nice it can feel with a good LUT.
  7. Justin Neck
    Justin Neck
    5/5,
    Version: 1.1
    I only just started playing AC a week ago. I have only been using a wheel (G27) for 3 days now. drifting is hard to learn. I could not hold slides to save my life. Applied the Recommended LUT.... and omg..... first practice session and im holding slides, transitioning slides and loving it. This LUT gives great feedback of where the wheels are pointed. It makes learning to drift so much more achievable as you can feel what you are doing wrong!

    11/10

    110% improved feel

    110% improved wheel enjoyment
    1. RasmusP
      Author's Response
      Haha thanks man!
      These reviews give me so much back, I'm really glad that I uploaded my work and that others can have so much fun with it! :)
  8. ddcperdo
    ddcperdo
    5/5,
    Version: 1.1
    Thank you for awesome work, man this is just perfect. 10 stars from me. Driving with G27 is now where it should be, thanks to you. My LUT test was detailed, but very simple. Driving pCars2 and RaceRoom Nordschleife (favourite GT3 and road cars) - then go in Assetto with same cars ... just NO GO. Then switched to your LUT settings (recom. - 50% FFB) and entire new FFB world opened. No FFBclip app needed anymore . Thanks again from me and my G27.
    1. RasmusP
      Author's Response
      Thanks for the review! :) I know what you mean! pCars and RaceRoom are better at getting rid of the deadzone than AC without a LUT!
      Glad that you can now discover the world of AC again :)
  9. zorg8
    zorg8
    5/5,
    Version: 1.1
    Thanks a lot, i had lost hope .. I rediscover my G25 !
    1. RasmusP
      Author's Response
      I know how it feels to lose hope with the Logitech wheels.. Glad I could help you to get back the fun of it :)
  10. Decoy Raven
    Decoy Raven
    5/5,
    Version: 1.1
    Feeling is great, but is there anything I can do about my wheel rattling / shaking at low speeds? (G29) it's especially noticable if I had a spin out or going out of the pit. This is my first wheel so maybe I'm not used to the noise it makes? The noise do limit when i can actually use the wheel though.

    Thanks for the upload and this guide, was easy to set up :)
    1. RasmusP
      Author's Response
      Thanks for the review! :)
      Your problem might be the "slips" and "abs" slider in the force Feedback settings. Go on track and activate the ffb app (mouse to the very right, wheel icon). Put slips, kerbs, road, abs to zero and check if it's gone. They are meant to give you additional feedback you would normally get from just driving the car in reality.
  11. Khaled Magdy
    Khaled Magdy
    5/5,
    Version: 1.1
    Thank you so much for taking the time to help others setup their logitech wheels. I got to the point where I thought I'd never find a good setup with Assetto Corsa
    1. RasmusP
      Author's Response
      Thanks for the nice words! :)
      I was at the same point... So worth it to dig deeper and come up with this.
      Happy to see others becoming happy too :)
  12. Walter_Start
    Walter_Start
    5/5,
    Version: 1.1
    This is really excellent ! But what i wonder what is the most versatile LUT of all to improve the feeling in all types of cars with my G25 ? And did i have to lower the gain in the profiler or the game settings ?
    1. RasmusP
      Author's Response
      Hi, thanks for the review :)
      Definitely pick the recommended, "NoClipButStronger" one. Profiler to 100, ac menu to 50% and in-car to your liking between 80-130% (numpad +/-)!
  13. Jean-François
    Jean-François
    5/5,
    Version: 1.1
    I'm using this since a few month. I highly recommend it for all G27 owner.
    1. RasmusP
      Author's Response
      Thanks for taking the time to write that review :)
      No matter of the amount, every single one matters for me!
  14. suspectmonkey
    suspectmonkey
    5/5,
    Version: 1.1
    This has completely transformed my G29 in Assetto Corsa! Gone is the deadzone and vague feeling, replaced instead with a solid, responsive experience thanks to the "recommended" LUT. Thanks for sharing the results of your determined research for all our benefit!
    1. RasmusP
      Author's Response
      Thank you for the nice review. It really makes me happy when reading these words :)
      PS: I saw the post in the support thread. I'll come back to you today!
  15. Droplin
    Droplin
    5/5,
    Version: 1.1
    Awesome & thorough guide, the ffb is quite noticeably better on my g29.
    One question, I'm using the recommended lut setting, 50% ffb ingame, but the ffb clip app suggests values way over 100% that way, I've bypassed it for the time being. Should I trust it's recommended setting or am I not supposed to be using it?
    1. RasmusP
      Author's Response
      Thanks for the kind review :)
      I found that the ffb is better with a lower ingame setting and then boosting it back up with the LUT. But ffb clip or the clipping bar in the pedals app don't see that so they think your gain is too low. Just ignore it and use numpad plus and minus to adjust the per car gain to your liking :)
  16. Speedyiii
    Speedyiii
    5/5,
    Version: 1.1
    Please, help me. I've followed the guide and everything worked perfectly, my g27 became a totally different wheel with very good ffb. But, after that assetto corsa gave me a "version mismatch" error and sort of a reset, my "ff_postprocess" file in Documents/AssettoCorsa/cfg continues to reset every time I start the game. I modify the file as written in the guide, I save, and it remain that way any time until I start the game. After I have started it, it changes back to standard and in fact the ffb is really bad. Can you help me sorting this out? I'm going crazy. "ff_process" in Drive/SteamLibrary/Common/AssettoCorsa/cfg is setted proparly and doesn't change, but it looks like this is ignored while the one in Documents is resetted continusly and used.
    1. RasmusP
      Author's Response
      Thanks for the Stars! :)
      For the issue please read the quote in the support thread but a short answer here: There is no obvious explanation but I had the same problem when using content manager. Do you use it or do you use the standard launcher?
  17. avenger82
    avenger82
    4/5,
    Version: 1.1
    Good tutrorial with a lot of info. Although I think everyone should generate his own LUT because every wheel is different (especially Logiteh) .

    Does anyone know what exastly DAMPER_GAIN does in assetto_corsa.ini?

    I spent some time looking for explanation, and just found different values recommended (usually 0.0 or 1.0) ?
    In comments it says it should be changed to 0 for G920, but how about G27/G29 for instance since it's FFB is so simmilar?

    Also while most people recommend Damper Effects strenth to 0 in Logitech Profiler some say it's better to set it to 70-100%?
    1. RasmusP
      Author's Response
      The damper only affects the generic resistance while the low speed ffb kicks in so you'll have the feeling of scrubbing tyres like on a real car.
      I like to have this light wheel though as I only do online racing and it makes life a bit easier to be able to spin the wheel freely while being in the pits/start/after spin. Just put it to whatever you want really :)

      To the own LUT: I agree and disagree at the same time. Until today no one with a logitech wheel had to adjust my luts. The overall specs are really similar no matter the wear.
      Did you try my LUT and if you adjusted something: please share the info in the support thread with your LUT :)
  18. shadow118
    shadow118
    5/5,
    Version: 1.1
    My previous config was actually pretty close to this already, this one feels maybe a tad bit softer.
    As a test did the Drift King achievement, so I guess it's good enough :D
    1. RasmusP
      Author's Response
      Did you use a LUT before too or what settings did you use?
      Anyway: I guess Driftking will do! :D :D
      Thanks for the review! :)
  19. Tastaturri
    Tastaturri
    5/5,
    Version: 1.1
    Very good update, even better feeling
    1. RasmusP
      Author's Response
      Thanks man! Hope you got the G29 sorted too :)
  20. Apolyon
    Apolyon
    5/5,
    Version: 1.1
    Awesome tutorial, many thanks! Drifting now is way more fun, gonna try this also in racing.

    I wonder if there is any difference on G29 - I think it has bigger deadzone than G27. I'm using your recommended LUT I am experiencing wheel wobble while driving straight when I give it a little touch. Any suggestion about it or it is intended to do so?
    1. RasmusP
      Author's Response
      Thanks for the review :)
      The wobble is a tradeoff for the tight feeling. Normally it should wobble but stabilize itself after a few shakes (if you just give it a slight notch and don't unsettle the car).
      If it's too much you can lower the car specific ffb with numpad minus until it suits you better :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.