The SimFeedback-AC DIY Motion Simulator thread

[sjb266]

Hey guys. Thought I’d create a thread for those taking the plunge into this brilliant DIY project..
I will be starting mine soon and I know there are others thinking about it.. so feel free to share your knowledge and experiences so we can all enjoy this platform to its full potential. A huge thanks to the developers who have really knocked this one out of the park!

Website: https://opensfx.com/2019/02/20/welcome-to-our-new-site/

Github: https://github.com/SimFeedback/SimFeedback-AC-Servo/wiki

For all the internals for the actuator contact Amy - skye@ntl-bearing.com
She can supply everything you need. Just remind her you want the ends of the shafts chamfered and make sure she sends the right sized ball screw - we have had a couple of issues reported. She is very helpful though and the cost is pretty good.


Huge thanks to @RowanH for writing a comprehensive user guide which can be accessed here - https://www.rowanhick.com/sfx-100-build-and-running-guide

In addition, @anton_Chez has contributed a list of post numbers for some of the important settings etc..
Post #320 SFX-100 thread
Post #327 SFX-100 thread for Discord correlation
Post #339 SFX-100 thread
Post #418 SFX-100 thread
Post #424 SFX-100 thread
Post #439 SFX-100 thread
Post #449 SFX-100 thread
Post #517 SFX-100 thread
Post #554 SFX-100 thread
Post #580 SFX-100 thread
Post #826 SFX-100 thread
Post #837 SFX-100 thread
Post #864,866,867,868,870,887,889,897 SFX-100 thread
Post #911,914 SFX-100 thread
Post #988,992,998 SFX-100 thread
Post #1147 SFX-100 thread
Post #1492 SFX-100 thread
Post #1511,1517 SFX-100 thread

I will try to keep this page updated with links to source the parts in other parts of the world. Just post whatever links you have and i'll add them here.

Please note: Not all the parts listed below are essential for the project. For the essential parts refer to the original shopping list.

Australia:

• O-Ring - https://www.ebay.com.au/itm/Kit-419Pcs-O-Ring-O-Ring-Black-Rubber-32-Sizes-With-Case-3-50mm-W8D7/223152697816?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
• D-Sub breakout board - DB25 25pin Female Adapter RS-232 Serial Terminal Module Breakout Board Connector
• Emergency Stop - https://www.ebay.com.au/itm/Reliable-Emergency-Stop-Push-Button-Box-600V-Switch-for-Elevator/192115082001?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
• Arduino Wiring - https://www.ebay.com.au/itm/40-pcs-Dupont-Cable-20cm-Jumper-Wire-for-Arduino-RPi-breadboard-AU-Stock/202436863098?ssPageName=STRK:MEBIDX:IT&var=502467628096&_trksid=p2057872.m2749.l2649
• Breadboard - https://www.ebay.com.au/itm/Mini-Solderless-Breadboard-400-Contacts-Tie-points-Universal-Available-New-lemon/123145741183?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
• D-Dub Cable - https://www.ebay.com.au/itm/Black-D...h=item3f6ace6403:g:038AAOSw9mpaSsU2:rk:1:pf:0
• Screw Shield for Arduino Leonardo - https://www.ebay.com.au/itm/New-Scr...h=item25a9d471a4:g:5BgAAOSwraJbc9rC:rk:1:pf:0
• Arduino Leonardo Replica - https://www.ebay.com.au/itm/DIY-Eduino-Leonardo-Module-with-USB-Cable-for-Arduino-ATMEGA32U4-Blue-Black/132719951279?epid=916281063&hash=item1ee6b9bdaf:g:2QUAAOSw5iNbWv6b:rk:123f:

Thanks to @AussieSim for the following links:

10A power lead(s) * 4
https://www.jaycar.com.au/2m-black-mains-extension-lead/p/PS4152

Top quality wire stripper
https://sydneytools.com.au/product/boxo-cutws205-multifunction-wire-stripper

RCD/safety switch power block
https://www.bunnings.com.au/arlec-4-outlet-heavy-duty-portable-safety-switch_p4420028

WD-40 lithium grease for the ball screws
https://www.bunnings.com.au/wd-40-specialist-300g-high-performance-white-lithium-grease_p6100408

Vibration pads
https://www.bunnings.com.au/whites-on-site-100-x-12-5mm-rubber-anti-vibration-mat-4-pack_p3961547

WD-40 Dry PTFE spray for the slider (free shipping)
https://au.rs-online.com/mobile/p/lubricants/7577134/

Arduino Leonardo (free shipping + frequent 10-15% off discount)
https://www.arrow.com/en/products/a000057/arduino-corporation

DB25 cables * 4 (free shipping)
https://www.arrow.com/en/products/ak401-2/assmann-wsw-components-inc

PETG * 3 (free shipping)
https://www.arrow.com/en/products/petg17bk1/mg-chemicals

WAGO-like connectors to avoid a breadboard (perhaps use genuine ones if you are doing 240V AC)
https://www.aliexpress.com/item/32906719488.html

D-Sub breakout boards * 4
https://www.aliexpress.com/item/32297675967.html

3D printer Creality Ender-3 Pro
https://www.aliexpress.com/item/32918302452.html

Wires from Arduino to D-Sub breakout (remove black plastic from the WAGO end)
https://www.aliexpress.com/item/32887680826.html

Crimp connectors for AC wire leads
https://www.aliexpress.com/item/32813550981.html

 

[Yakone26130]

OK merci beaucoup

 

[Yakone26130]

Is the signal input for the servo driver 24v or 5v?

Hi, what is the signal?

 

[rocketdivision]

good morning, could someone help me? when trying to connect to the simfeedback I get connection error failed

 

[Dennis Karlsson]

good morning, could someone help me? when trying to connect to the simfeedback I get connection error failed

Are you using the wrong COM port? Look under "Setup tab / Controller 1".

Did it ever work or is this the initial test?

You can find the right COM port using the Device Manager (Windows key + X and select Computer Management).

 

[rocketdivision]

Es la primera prueba, pero no me permite conectarme con simfeedback, rechaza la conexión. El puerto de control 1 está encendido y todo el cableado arduino correcto

 

[Dennis Karlsson]

Es la primera prueba, pero no me permite conectarme con simfeedback, rechaza la conexión. El puerto de control 1 está encendido y todo el cableado arduino correcto

English!?

Anyway. Google translate gives me:
"It is the first test, but it does not allow me to connect with simfeedback, it rejects the connection. Control port 1 is on and all arduino wiring is correct "

What COM port have you chosen?

 

[rocketdivision]

No sé qué hacer, revisa todo. el problema es que no puedo conectarme a simfeedback porque rechaza mi conexión

 

[rocketdivision]

[QUOTE = "Dennis Karlsson, publicación: 3073564, miembro: 343928"]
¿¡Inglés!?

De todas formas. El traductor de Google me da:
"Es la primera prueba, pero no me permite conectarme con simfeedback, rechaza la conexión. El puerto de control 1 está activado y todo el cableado de arduino es correcto".

¿Qué puerto COM has elegido?
[/CITAR]com 4

 

[Dennis Karlsson]

com 4

And that is the Arduino controller according to the Device Manager?

 

[rocketdivision]

yes, according to the pc it is the com 4 since it is the only one that appears and when I disconnect the arduino the com4 disappears

 

[Dennis Karlsson]

yes, according to the pc it is the com 4 since it is the only one that appears and when I disconnect the arduino the com4 disappears

ok, good. Have you applied the firmware?

 

[rocketdivision]

Yes, I have the arduino one, I apply the firmware and charge it.
three appear in the folder, which one should you install? probe all

 

[Dennis Karlsson]

Yes, I have the arduino one, I apply the firmware and charge it.
three appear in the folder, which one should you install? probe all

You should upload the one that suits your model of Arduino.
If you have a Arduino Leonardo you should use "ACServo_Leonardo_00_xx_xx.hex".

 

[rocketdivision]

I have a one r3, I should use this? SimWind.ino.Uno.hex or this ?MotionFeedbackRCServo.ino.Uno.hex

 

[rocketdivision]

but I tried all the ways and it's as if the pc blocked my connection

 

[Dennis Karlsson]

I just searched the troubleshooting thread on Discord.

2019-10-28
Ah ok, you need an Arduino Leonard.
Uno and Mega do not work
Uno is only supported for RC Servos :grinning:
and SimWind

I think you will need a Leonardo model.
I may be wrong on this one. I actually don't know.

 

[rocketdivision]

Thank you very much Denis for your help, and thank you for seeking information for me selflessly. I will keep you informed, since I bought an arduino leonardo

 

[Dennis Karlsson]

Thank you very much Denis for your help, and thank you for seeking information for me selflessly. I will keep you informed, since I bought an arduino leonardo

You're welcome. I hope you'll get it running soon. It's really awesome.
Have a nice day. =)

 

[Yakone26130]

[QUOTE = "Dennis Karlsson, post: 3073559, membre: 343928"]
Utilisez-vous le mauvais port COM? Regardez sous "Onglet Configuration / Contrôleur 1".

Cela a-t-il déjà fonctionné ou s'agit-il du test initial?

Vous pouvez trouver le bon port COM à l'aide du Gestionnaire de périphériques (touche Windows + X et sélectionnez Gestion de l'ordinateur).

View attachment 335070
[/CITATION]
es mon arduino mega 2560 est bien reconnu sur le port COM5.
dans le contrôleur je mets bien COM5 et quand je flasherai le arduino mega 2560, j’ai bien choisi le COM5 avec MEGA type 2560. Par contre dans la liste des firmware j’ai 3 choix et donc je mets acservo leoanardo.
Je trouve ça étrange de mettre ce firmware.
Existe-t-il un firmware spécial pour Arduino Mega 2560?

 

[Yakone26130]

Ils initial test