Podium DD's VS Simucube 2's

[Darren Byrne]

Hi guys, the past while I was trying to find good comparisons between these two models of dd's. Has anyone tested both ? I understand that the software for these aren't complete yet but is there any clear winner here ? thanks.

 

[JakeMerr]

Ouch. That's rather expensive haha. Yeah I don't like DT either but I didn't want to keep rolling the dice of getting lucky with a restock. I now have a date when fingers crossed it will arrive.

 

[JohnBeardmore]

When measuring current with a clamp you need to separate the cables and go around only the live.

 

[RCHeliguy]

So why continue shipping Sport with inferior PSU?
The only reason we believed that Meanwell is the best of the best and everything else is crap is because GD kept saying this for years, way before SC2, when DIY OSW was a thing, then for SC1. And confirmed it again when testing different PSUs for SC2.
Wattage new PSU is cerified for by manufacturer does not inspire confidence either. It's 330watts and you are saying "it can do 450 just fine, don't worry your pretty little head".

Meanwell is good, but not nearly at the top of the heap. In industrial settings some consider Meanwell PS's getting by cheap.

It is nice that they have a decent power cable length now, and I think it is good that they are taking care of the common complaints. Many people didn't like the double power supplies and to be fair, they are bulky.

If I were buying one today I would welcome their changes. As it is I've made room for the double PS's and got the GPU extension cables like most people did. People are nothing if not adaptable in this niche.

 

[RCHeliguy]

I know a number of people who have been very happy to have the TD Paddock available. These are likely other people who haven't been combing the GD forum for profiles.

I don't consider this a competition. The forum will always be there, but this is something very useful to many of us.

@EsxPaul obviously the best motor is the one they put in their Ultimate. I mean, it's all in the name, right?

 

[diablo2112]

I've been using an OSW (basically, the SC-1) for the past 3 years, so I'm biased. I upgraded to the 4.2M pulse encoder a year ago, and that made a fantastic wheel just about perfect. There's been surprisingly few reviews and comparisons of the Podium DD wheels. There's also been a few reports of problems with the Podium DD wheel right here (look in this subforum, disconnects and other problems reported).

My OSW has been flawless for 3 years. I was able to painlessly upgrade to the latest firmware, drivers, and tech throughout. That says something. Other than early issues with EMI if you didn't ground it properly, I'm not aware of any issues anyone has had with the system. All the good experience has been transferred to the SC-2. If I needed to replace my wheel (and I don't), I'd go straight for the SC-2.

 

[Deleted member 197115]

Argon OSW - 4 years of flawless service and endless fun, SC2 Pro is coming in September.

 

[Deleted member 197115]

Also genuinely curios, are there any ex OSW, SC1 users who opted for Podium instead of SC2 and why.

 

[diablo2112]

The only reason I would see acquiring the Podium over an SC-2 would be for easy PS4 compatibility to run the new Gran Turismo.

 

[Darren Byrne]

what price differences are there with both wheels incl a good wheel + button plate for sc2

 

[Deleted member 197115]

what price differences are there with both wheels incl a good wheel + button plate for sc2

Research is half of the fun.

 

[BrightCandle]

GamerMuscle recently got a DD1 and was comparing it to his simplicity small mige OSW, which is about the closest comparsion I have heard. He said those two solutions were very close but the DD1 was smoother and less prone to erratic behaviour like in crashes whereas the OSW was slightly more rough and responsive but also required setup to get it to be less so.

He is working on a review and I hope he will address it there.

 

[RCHeliguy]

I have been on the fence for a while and rooting for Fanatec to win me over.

I originally thought Fanatec's key strength was their huge assortment of wheels and their eco system.

So I look at my Fanatec equipment and I replaced my pedals, H patten shifter and hand brake. The replacements are all much better.

Next I look at my wheels. The McLaren GT3 wheel has had issues. On top of this I just upgraded mine with the Sim Racing Machines shifter upgrade and it feels MUCH better now.

My 918 wheel is pretty nice. I also upgraded it's shifters with magnets and they shift a bit nicer, but the buttons on the wheel are not the best.

So I fell in lust with the Precision Sim Engineering wheel. To my eyes it looks perfect. It's not cheap and neither were some of my upgrades.

My experience to date is that Fanatec makes good stuff and they have a solid eco system, but they aren't actually the best at anything in my experience to date.

So when I look at the SC2 Pro at the same price as the DD2, my thought is now that the SC2 Pro is actually a bargain compared with DD2.

I wanted the DD2 to be just as good, and I already know this isn't about driving faster or better it's about reliability, longevity and quality.

Anyway I've ordered an SC2 Pro and Precision SIM engineering GT3 wheel to go with it. I'll be giving all my Fanatec equipment to my son.

 

[Deleted member 197115]

GamerMuscle recently got a DD1 and was comparing it to his simplicity small mige OSW, which is about the closest comparsion I have heard. He said those two solutions were very close but the DD1 was smoother and less prone to erratic behaviour like in crashes whereas the OSW was slightly more rough and responsive but also required setup to get it to be less so.

He is working on a review and I hope he will address it there.

SC1 vs DD1, not super useful as people upgrading from SC1 to SC2 report improvements across the board.
Still better than nothing, looking forward to it.

 

[Jens Roos]

He said those two solutions were very close but the DD1 was smoother and less prone to erratic behaviour like in crashes whereas the OSW was slightly more rough and responsive but also required setup to get it to be less so.

There are different filters and smoothing that can be applied that make a huge difference in the SimuCube software for SC1 (and SC2) so it could be a tuning issue as well.

Lets cross fingers that SRG do a video comparing SC1, SC2, DD1 and DD2 when the Fanatec software is ready, that would be awesome.

I'm on a SC1 since 2 1/2 years, over 2.5k hours without any issues so SC1 is extremly solid. If google you do find both DD1/2 and SC2 owners with different issues, but might have been the same for SC1 in the begining.

 

[Deleted member 197115]

SC2 - different motors, different encoders, different electronic board, heavily modified FW and SW with new filters. I am surprised there are any similarities at all.

 

[Spinelli]

I had a large Mige OSW for about 1.5 years, a true Simucube 1 for another 1.5 yrs, currently an Accuforce, and in September will have an SC2 Pro. I'll let you know how it compares in September

The only thing that worries me is some people reporting a lot of heat with the SC2 Pro. These things are supposed to be way overengineered / overbuilt and supposed to last a lifetime so the following reports are worrying: https://community.granitedevices.com/t/sc2-pro-possibly-overheating-and-losing-ffb/3157

 

[RCHeliguy]

If Fanatec did better than the first SimuCube with their first direct drive wheel using unfinished software, I'd say that's a good thing. It means that Fanatec is still improving their software. Many people who tried the DD1/DD2 side by side nearly a year ago considered the DD wheels comparable with preferences going in different directions. Also remember that until the SC2 was released, people were saying the SimuCube 1 and OSW wheels had everything a person needed and that Fanatec couldn't compete with that. Funny how those products are now irrelevant.

I think we can take it as fact that both the SimuCube 2 and DD wheel bases have all the hardware needed to create an excellent experience. Asking which is best is a moot point. Having one over the other will not make a difference in a race, period.

At this point the software that drives these wheels is everything! It's entirely possible that each company will have the "best" feel for certain people based on the release dates of their software.

So forget about that for a minute.

Assuming they both offer identical performance, what differentiates them that you care about ?

That is what you should be focusing on.

In my case I have no Fanatec ecosystem to worry about. I've upgraded all my components with what the promised Podium level components will compete with whenever they arrive. I have no idea how long they will take to design and put into production or if they can compete with the high end components already out there.

I've also decided I like the higher end wheels available and I think it is silly to spend another $200 for each wheel for an adapter to allow me to use them on a DD wheelbase.

If you are perfectly happy with all your Fanatec controls and wheels, or will be happy to wait for new Podium level controls to be released before upgrading your controls, get a DD1 or DD2. It's simple. If you are thinking about upgrades, then things get a bit murkier.

 

[Hiro Abe]

Personally, since I'm currently on a CSW v2.5 i figure either one in terms of improvement in feedback will suit me fine. My focus regarding a deciding factor is reliable performance. From what I'm seeing, the Simucube 2 looks to be the winner here. I'm a Fanatec fan since everything I've purchased from them has not given me a lick of trouble (yes, i do own the GT3 wheel and was an early adopter to boot). Going to a DD would be much more convenient for me but if i was pulling the trigger now, i would order a Simucube 2.

Still early days for both units though.

 

[Jens Roos]

I would consider both DD1/2 and SC2 both high end consumer level products, SC1 on other hand is based on industrial level components for 24/7 operation. However, SC1 firmware will from this point have little development as only a limited set of functions will be ported from the SC2 firmware.

I'm currently on the last generation of SC1 wheel, within a year or two there be more feedback regarding performance and reliability from both alternatives, if one would consider to upgrade to another unit.