Marco Bijl
Axe Travels
Reported incidents will be reviewed by the staff. The procedure to file an incident report can be found at the Info and Intro thread.
Scott and the Luc at ISI have come up with a small tweek you can do in the controller config that will ease the over powerful rattling that some G25/7 owners get when going off track or on the curbs..Quote from scott:...such as the G25/G27 you can try increasing this value in your Userdata/player controller.ini file (if you saved your own profile you would have to change it there as well):Steering torque filter="0"The range is from 0 to 32.This will filter the FFB effect over a series of frames, which will smooth out the feedback and reduce the rattle. Please note that as you increase this value the FFB may start to feel a bit "spongy" or "numb" and that it will increase latency.The reason you don't feel/hear this rattle in many other sims is because they by default provide some filtering. By default we do not.The value you set this to will be down to personal preference. If it feels good to you, and the rattle/noise is acceptable, then go for it. We did some testing locally and came up with some different values.One of our internal testers felt 4 was good.Luc settled on a value of 8. He felt any higher felt to numb for him.I personally like 16. I could still feel the car, catch it when it got loose, it didn't affect my lap times at all, and I didn't perceive any latency, neither visually nor in feel. Yes, it did feel more on the numb side, but after a few laps I found I liked it actually.So, give this a try and see if you can find something acceptable...Edit: Please note this is not a permanent solution, but hopefully will get you to something acceptable for the time being...Important
Remeber you have to Reselect the profile for it to apply the new .InI file changesIf you simply change the .InI it will have no effect in the game unless you reselect the profile.