If simhub can't detect your arduino anymore it probably means something is wrong on the hardware, maybe a short or something like that. Are you still able to upload ?Hello Wotever,
I've an issue with SimHub (V. 6.6.0 Beta2) and my arduino (nano clone). I wired a 74hc595 and one 7-segment for Gear, selected the right pins in the setup and loaded the generated sketch to the arduino via SimHub. The 7-segment doesn't light up also after starting the replay of my recorded game session. And Simhub doesn't also detect the arduino hardware. Now i don't know, which problem i have. Connection between SH and arduino? It whink my wiring is right, because if i power the arduino up, for a second the 7-segment lights up too, with random value.
Could you help me please? Or any other person, who had this problem too?
Thank you!
I'm not sure as I never played with leonardo, but arduino pro micro should be totally cross compatible I think, have you tried to choose it in the setup tool.please add leonardo support
Sadly simhub does not have any "analogue" axis concepts currently and i can't see any ways to get it outside of simhub when not using an arduno micro.hi ...its' possible to command the analogue joystick,like this...tks
I got an issue report, i've not investigated in details yet, but from my tests everything was fine on ACC. did you had any issues with ACC ? Please take into consideration that ACC is in early access and still gives very few data even on the last early access release.Please, assetto corsa competizione.... Please, please, please
Did you clicked "apply" just below the settings ? Arduino needs to be reinitialised to take it into account.I still have a question about the custom protocol. It does not seem to work for me.
I filled out the standard:
format([DataCorePlugin.GameData.NewData.SpeedKmh],'0') + ';' + isnull([DataCorePlugin.GameData.NewData.Gear],'N')
but to no avail. It does not write back to the system log. When I re-initialize the arduino this is printed:
INFO Starting Arduino in Multiple USB mode, devices configured :
{"CustomProtocol":{"Expression":null},"deviceName":"SimHub Dash","displayModules":0,"readButtons":false,"disabled":false,"RgbLeds":0,"Motors":0,"speedLevel":10}
INFO Found one device on COM4 named {
"ConnectedModel": "j",
"Features": "GNJPX",
"DeviceName": "SimHub Dash",
"PortName": "COM4",
"HasBoost": 0,
"HasSpeedo": 0,
"IsBluetooth": false,
"HasTacho": 0,
"ExpandedFeatures": [
"mcutype",
"Gear"
],
"MaxAheadDatagrams": 0,
"DatagramMaxLength": 0,
"MCUModel": "ATmega328P",
"ReceivedDatagramsCount": 0
}
I am a fool. my laptop has only 12 inch screen and the apply button was hidden... my god.Did you clicked "apply" just below the settings ? Arduino needs to be reinitialised to take it into account.
Ah ah actually I made a lot of redesign on this screen to make it shorter but it looks like it's still not enoughI am a fool. my laptop has only 12 inch screen and the apply button was hidden... my god.
thanks! I was starting to doubt my own sanity
Thanks for your fast replay. Yes, after i reinstalled the bootloader on the board i can upload my own sketches. With my test sketch for the 7-segment output (just a count from zero to nine) it runs. But after trying to upload your sketch via SH it does not work. I installed the bootloader with arduino version 1.8.5. And SimHub delivers an older version of arduino. Could this be a reason?If simhub can't detect your arduino anymore it probably means something is wrong on the hardware, maybe a short or something like that. Are you still able to upload ?
I don't think it's related to the arduino version, I just keep it because changing the version would mean test back every single device and device combo again which is a mad task. But I've been using this arduino IDE with any arduino I had in hand for years with no troubles.Thanks for your fast replay. Yes, after i reinstalled the bootloader on the board i can upload my own sketches. With my test sketch for the 7-segment output (just a count from zero to nine) it runs. But after trying to upload your sketch via SH it does not work. I installed the bootloader with arduino version 1.8.5. And SimHub delivers an older version of arduino. Could this be a reason?
For information: SH tries to connect to the serial port and recieves a "hello" every couple of seconds...
I thought with the new release 0.4 you had acces to the rest of data. Position, time, tyres, car name, etc...I got an issue report, i've not investigated in details yet, but from my tests everything was fine on ACC. did you had any issues with ACC ? Please take into consideration that ACC is in early access and still gives very few data even on the last early access release.
No, it's the broadcasting SDK, it's a little different, it's dedicated to broadcasting, and I've tried it even if it could give more advanced data it can't hold high speed refreshs and crash instantly when configured at 60FPS.I thought with the new release 0.4 you had acces to the rest of data. Position, time, tyres, car name, etc...
do you create this circuit...the 74hc595 dont work alone whitout powerHello Wotever,
as recommended i updated to version 6.6.5 and tried to upload again. So it's the same thing ... doesn't run. To connect the 74hc595 i use Pins 2,3,4 (D2,D3,D4). How can i upload a screenshot here? Would show you the window. Does it be related to the unlicensed SH version i have?
I am desperate, the simplest Gear Indicator seems not to work on my computer.
Hello Wotever,
as recommended i updated to version 6.6.5 and tried to upload again. So it's the same thing ... doesn't run. To connect the 74hc595 i use Pins 2,3,4 (D2,D3,D4). How can i upload a screenshot here? Would show you the window. Does it be related to the unlicensed SH version i have?
I am desperate, the simplest Gear Indicator seems not to work on my computer.