The Lost Art of Using An H-Shifter

The Lost Art of Using An H-Shifter.jpg
Recreating the feel of a real race car is the core principle of sim racing, and the advancements in equipment reflect this with each new piece that is released: Better force feedback, racing-grade pedals – but as modern race cars usually do not have manual shifters anymore, lots of sim rigs do not either. As a result, driving with a fully manual transmission has become somewhat of a lost art.

Granted, the title is a bit overly-dramatic, but at least it holds true when looking at most modern sims and esports that tends to get focused on. These use modern cars that have paddle shifters on their wheels, the GT3 class being a prime example of this. Some do not even use a clutch for starts anymore, and while others do, analog clutch paddles do the job on the wheel as well. Two-pedal rig setups are no rarity because of this.

It is likely because of this that there are not too many dedicated shifters on the sim racing market. There are offerings by Fanatec, Thrustmaster, Logitech and a few smaller manufacturers, but the choice sim racers get is far from the enormous selection of pedal sets, for example. Still, for enthusiasts of motorsports history (like the author), H-shifters are an essential part of the experience in order to drive older vehicles the way they were meant to be driven.

While using paddles makes shifting gears easier and is absolutely impossible to imagine not doing in a modern F1 rocketship or a GT3, it does not compare to the feel of muscling around an older race car while using three pedals and a manual shifter. It is quite literally a handful, as well as a bit of a workout. Not to mention the coordination part – if you have never done it before, learning to use all three pedals is quite the process, especially on downshifts.

The upshifts are fairly straight-forward, as lifting your right foot off the throttle while pressing the clutch and selecting the next gear is relatively easy. However, using three pedals with just two feet is more challenging: Braking with your right foot (as opposed to the left foot normally used these days in modern race cars), waiting for the revs to drop enough, then pressing the clutch while using your heel to blip the throttle in order to rev-match and selecting a lower gear, sometimes even going down two at a time – it is easy to see why they prefer paddles instead of heel-toeing their way around the track.

Of course, eliminating the process described above makes downshifts considerably less complicated. But to get more immersed in a car that actually has this kind of transmission, nothing beats trying to learn this dance on the pedals. Modern sims offer plenty of vintage content, be it Assetto Corsa via mods, rFactor2 or Automobilista 2 – it is unlikely to form the base of an esports competition, but if you can find a one-off event or a league using cars with a fully manual transmission, it is worth a closer look. A word of warning, though: You might become hooked.

What is your opinion on shifters in sim racing? Have you bothered with learning how to use them for vintage cars? Let us know in the comments!
About author
Yannik Haustein
Lifelong motorsport enthusiast and sim racing aficionado, walking racing history encyclopedia.

Sim racing editor, streamer and one half of the SimRacing Buddies podcast (warning, German!).

Heel & Toe Gang 4 life :D

Comments

Are there any really good feeling H-pattern shifters for sim racing that are not as crazy expensive as the pro sim h-pattern shifter? (I am currently using a thrustmaster TH8A) Also, what manual cars would you guys recommend driving in Assetto Corsa, (mods ok) I have trouble deciding what to drive when it comes to manual cars.
If you own a 3d printer there is a diy H-pattern/seq shifter that will cost you around 200$ to make, It is said to be among the best, apparently on par with the pro sim, it's called lebois racing srt shifter v9.0
 
I'm just about to order either a Pro-sim or a BDH, but I can't decide due to the Pro-sim has hall effect and uses 3 rods, but I don't have a clue how the BDH works, do you have an idea if it's using rods like the Pro-sim? I already have a VNM so I don't want one that's not a big upgrade from what I have.

I think I am now leaning towards the BDH though even though I don't know how it works!
It does use a rod yes, so you get the sensation of mechanically moving an object with inertia when you move the gear stick. If you want more info or want to get a good feel for the people behind the design then join the FB group and send a message, they are very helpful.
 
It does use a rod yes, so you get the sensation of mechanically moving an object with inertia when you move the gear stick. If you want more info or want to get a good feel for the people behind the design then join the FB group and send a message, they are very helpful.
Thanks! That’s good to know and what I wanted from a shifter, I actually ordered it today but I didn’t know there was a group, just found it!
Can’t wait now, big upgrade.
 
I spend a lot of time driving classic racing cars, so I get a lot of use from my shifter, and boy is it fun. I think that there should be some new simulator titles that recreate the style of sim like GPL and GTR2 without the impossible setup to get the games working.
 
I grew up in the 60's so I of course love the good old heel & toe style of driving. I love the old Le Mans sports cars and prototypes.

I really like the way Assetto Corsa lets you switch from old H pattern cars to modern paddle shift without having to re-assign the shifter controls. I also wish there were more H pattern open servers on AC and I do very much like the Nordshleife servers that do offer several H pattern cars mixed with modern choices for track day.

AC has super Sauber C9's , Porsche 962 and Mazda 787's and of course all the excellent Legends mod cars. I use a TH8-A Thrustmaster shifter with Clixbeetle and short shift mods and T-LCM pedals.
 
Last edited:
Really looking forward to get a H-Shifter... next step is a new wheelbase. Soon, very... :)
 
The way Assetto Corsa lets you switch from old H pattern cars to modern paddle shift without having to re-assign the shifter controls.
I got into H-shifting because of AC and forced correct shifter usage (luckily my 1st setup came with a TH8-A shifter & triple pedals, also only have ever driven manual cars IRL). And the few people I've had over that have raced on my various setups, at least started out only wanting to take out H-shifter cars :)
 
If you own a 3d printer there is a diy H-pattern/seq shifter that will cost you around 200$ to make, It is said to be among the best, apparently on par with the pro sim, it's called lebois racing srt shifter v9.0
Can't comment on comparing it to anything but a TH8 is tersm of sim hardware but I built a Lebois SRT and it's an awesome bit of kit. Has the same very positive kind of feeling that I like from my MX5

As for using shifters for sim racing I always try and go 1:1 to what the real car has and really enjoy H-Pattern cars like Gr.A touring cars
 
Manuel H pattern is My preferred why to sim race. Once in a while I'll take a self driver for a spin, that's what I call semiautomatic paddle shifter cars. 99 and down is all I roll in, classic and vintage cars all day!
 
Still Racing real vintage cars double clutch) on track.
Manual transmission are coming back again
for sports cars. Driving is about feel not speed.
You feel like going warspeed when YOu are in an
a920's car doing 50 km/hr.
Been Simracing ever since GPL came out.
Upgraded recently to CSL DD and a racing cockpit,
aded another dimension of feel.

Ivan
 

Latest News

Article information

Author
Yannik Haustein
Article read time
3 min read
Views
34,976
Comments
174
Last update

Are you buying car setups?

  • Yes

  • No


Results are only viewable after voting.
Back
Top