Hey everyone! Can you guys please tell me what lines have been changed in the XML file? I tried every mod and even tried to change these lines myself, but nothing happened.. What am I doing wrong?
I tried to change these lines but still had no luck...
<F1SuspensionDamage> <SpeedThreshold value="4" /> <FrontDamageScale value="1.0001" /> <RearDamageScale value="1.0001" /> <WheelDetachScale value="1.000000" /> <PartsDetachScale value="0.75" /> </F1SuspensionDamage> <F1WingDamage> <SpeedThreshold value="1" /> <DamageScale value="0.0001" /> <ChassisDamageMultiple value="1" /> <SideDetachScale value="0.2" /> <FullDetachScale value="0.3" />
MANUAL TWEAKS
If you want to tweak the settings to your own liking then open the Manual .xml files in Notepad++ and use EGO ERP Archiver to import your custom variables into the directory. (You can google how to do this)
TYRE WEAR FOR 25% RACES
Search: <UpgradeWearFactor value="1.35" />
And change the value from 1.35 to whatever you think is best.
TO ADD EXTRA DAMAGE TO MYTEAM CARS
Open the .xml file for your MyTeam Engine (or all 4)
Search: <F1SuspensionDamage>
Change the values to the following:
<F1SuspensionDamage>
<SpeedThreshold value="5.5" />
<FrontDamageScale value="1.00" />
<RearDamageScale value="1.00" />
<WheelDetachScale value="1.000000" />
<PartsDetachScale value="0.75" />
</F1SuspensionDamage>
<F1WingDamage>
<SpeedThreshold value="5.0" />
<DamageScale value="0.0001" />
<ChassisDamageMultiple value="0.9" />
<SideDetachScale value="0.25" />
<FullDetachScale value="0.5" />
SLIPSTREAM VALUES
Search: <m_aeroSlipStreamAirDensity
And change the 3 values:
<m_aeroSlipStreamAirDensityScaleLift value="0.95" />
<m_aeroSlipStreamAirDensityScaleDrag value="0.8" />
<m_aeroSlipStreamCarWidth value="1.5" />
Lift = multiplier of downforce when behind the car (1 is default)
Drag = the drag (0.9 is default)
Width = the width area of a car gaining the slipstream advantage (1 is deafult)
PUNCTURE WEAR
Search: <PunctureWearMin value="0.9" />
And change the value to whatever you want. 0.9 means you won't puncture until hitting 90% tyre wear. 0.75 is default (75% tyre wear and then you have a chance to puncture)
PUNCTURE TIME TO POP
Search: <BlowoutMinTime value="0.100000" />
And change the min time and max time to whatever you like.
DEBRIS PUNCTURE SPEED
Search: <DebrisPunctureMinSpeed value="5.0" />
And change the min speed and max speed to whatever you like. I have it set to 5 and 400. Meaning if you run over debris anywhere between 5MPH and 400MPH there is a chance your tyre will pop.
DEBRIS PUNCTURE CHANCE
Search: <DebrisPunctureProbabilityAtMinSpeed value="0.5" />
And change the min and max to whatever value you like. 0.5 means there is a 50% chance of getting a puncture when you run over debris. Setting this to 1 will mean there is a 100% chance.