MGP21 G29 Configuration of Wheel and Pedals

[Dboy1517]

I have installed x360ce_64.exe in the Engine/Binaries /Win64 folder and executed the file, creating the following files x360ce.ini, ximput1_idll, xinput1_2.dll, xinput1_3.dll, xinput1_4.dll and xinput9_1_0.dll. When I open x360ce_64.exe I see a screen with all sorts of options. Along the top are selections for four different controllers, followed by Options, Game Settings, Controller Settings, Help and About selections. Below that, I've selected Logitech G HUB G29 Driving Force Racing Wheel USB. Directly below that are selections for General, Axis to Button, Advanced, Left Thumbn, Right Thumb and Force Feedback. Below is an image. What do I need to do ---step by step to map my G29 controller wheel and pedals to work. I cannot do it in game -the game does not recognize the G29. Thanks.

 

[Dboy1517]

click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel. very easy mate tbh, set your rotation to 180 in the logitech software. add motogp to game settings, the start the game from there.

I was able to do this: click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel and set rotation to 180 in Logitech software. However , I could not add motogp to game settings or start the game from there . Not sure exactly where "there" is. When I launch the game from motogp21.exe the game launches but when I check controller options the g29 is not recognized. I only see keyboard or box controller options. Sorry, but I must be missing something??? Can you help?

 

[ziplob]

i have g 27 but I think is the same , I will try to see the diference and if is possible good feeling to drive with steerimgwheel , thanks

I'm not sure if the g27 lets you set rotation in its software, if it does set to 180 because steering will be far to slow otherwise. good luck

 

[Dboy1517]

I followed the directions in the video, but I wheel is still not being recognized. The other triggers and buttons ---accelerator, brake, upshift, downshift, and rear brake all seem to be recognized. When I empty the Stick Axis X slot and then select Record---nothing happens when I turn the wheel. I've posted a picture of the settings which may be helpful.

 

[Kimmo Kokkonen]

Finally, it works, I can drive MotoGP 20 with my G29 Wheel, setup is not yet perfect and driving is not too easy but I belive it can be better, but anyway I can drive with steering wheel. I bought this game in April or May 2020 and since then tried and tried, several hours lost for this but hey, never give up!!! I did everything just like presented in video except x360ce location, opened it from inside the game folder...

Edit: also you should setup controller in the game, then it start working, only problem is that mouse cursor is not acting as normally, hard to see the cursor but mouse working still. Good luck!!!

 

[Dboy1517]

Nice to hear that you were able to get your g29 to work. I'm still having a problem getting x360ce to recognize my wheel--pedals and paddles work. I put x360c in my C drive. I had it in the game folder but it seems to work better in the C drive. I also am having a problem with my mouse. The cursor flies all over the place and I cannot use it to navigate. Thoughts?

 

[Kimmo Kokkonen]

I can take few screenshots from my setup, hopelly this weekend, I did some changes what comes to brakes and throttle, then also mouse start working normally, also throttle works opposite way at the first time, that was very hard to learn, but now it works like a charm

Anyway my only problem still is the wheel rotation, I'm not able to use calibration feature from LG Control panel, button is disabled (grayed out). So that current rotation is for cars and makes bike riding a quite challenging and slow. But I can drive around etc.

 

[Kimmo Kokkonen]

Found better tool for G29, basic Game controller not support G29 wheel but G Hub supports, wow I'm learning new things...

Logitech G HUB Advanced Gaming Software App - Hong Kong

Logitech G HUB is new software to help you get the most out of your gear. Quickly personalize your gear per game.

www.logitechg.com

Rotation setup tool G Hub

So my all problems with MotoGP 20 & steering wheel now solved!!! Screenshots later today.

 

[Kimmo Kokkonen]

Ok, here we go again...the almost final setup for KYMIRING!!!!!!!!!!!!!

 

[Kimmo Kokkonen]

Okay, I recorded video about my first laps with MotoGP 20 with G29 Steering wheel, important tips before you continue to solve this same issue we all have had:
1) setup x360ce for MotoGP.exe (see my setup image above in this thread)
2) setup Logitech G Hub (see my setup image above in this thread)

The most important thing is that do not close those 2 applications when you start MotoGP, just minimize them. Otherwise wheel not work correctly or not at all.

Finally you can do this

 

[Dboy1517]

I have set up my x360ce and G29 exactly like yours. The brake, accelerator, upshift, downshift, and steering functions are responding in x360ce. I launch MotoGp 21 and select a time trial. The game starts with auto-drive for a few seconds, but I have no control over speed, braking, steering, and the bike crashes into the wall when that ends. I select options and see the keyboard selected. If I select controller, the same thing happens---no control. So it looks like the emulator is working but the game is not allowing the emulator to take over controls. Thoughts?

 

[Dboy1517]

I have not been able to get MotoGP to recognize my controller (Logitech G29 wheel). As noted above, I have been able to map accelerator, brake, steering, upshift, and downshift functions in x360ce---they all show that they are functioning in the x360ce screen--- but my controller is not recognized when I launch MotoGP. I have x360ce running in the background as well as Logitech Hub with a MotoGP profile selected in the Hub. I am so close but can't seem to get the wheel, paddles, and pedals to be recognized. I have selected the game executable file as well in x360ce so the emulator is pointed to the right place. Thoughts?

 

[Darin Stevens]

I'm able to get the wheel buttons working in game but 'something' is constantly scrolling down (like the down arrow in being constantly pushed). This makes it impossible to select anything that is "up". Any ideas?

 

[Dboy1517]

I had a similar problem...my cursor would fly all over the place and I could not use my mouse to select anything. There is an incompatibility problem with this game and controllers except for Xbox controllers. I have reached out to developers about this. Crickets.

 

[Pepper606]

Look at your axis configuration. I had them auto set to full axis.
So my throttle is IH2, inverted half axis 2. Set it to full and the game thinks there's an input when you're not doing anything. Hence the scrolling.

 

[Darin Stevens]

Hi Pepper,

Excellent, thanks. Getting on the right track now. Following the X360 green "travel" animations helps quite a bit.

Still not fully mapped but at least the scrolling thing is under control =)

 

[lukesharp]

Thank you to all who posted here. I can now use my G29 in Motogp 20. Not fully dialled in yet, but definitely on the way.

 

[MrLonguinha]

I'm trying to follow the procedure to be able to play the MotoGP 22 game with my G27... I've tried everything, but nothing works. I do the mapping in the X360 emulator (I press my g27 buttons, everything responds correctly), save the settings, I leave the program open too. The Logitech G hud (I downloaded it recently, I just added the MotoGP 22 game, but I didn't change anything, because I didn't find out where the G27's settings are (if it's possible because it's a steering wheel that is no longer manufactured), but even so I leave the program open. I enter the game through the shortcut on the desktop, no command on my steering wheel can give the "follow" as with other games when it asks to press any button. It was much better to drive the "Motos" with steering wheel since the Game Dakar 18, I adapted well, it is not as sensitive as the control of the X360. I found a video of a Brazilian on youtube who adapted a "handlebar" and everything possible for a simulator for motorcycles, using as a base, everything from G27 (it was on MotoGP 21), that's why I don't know where the problem is, I keep trying to find some solution or suggestion to solve the problem.

 

[Pepper606]

Here's something I discovered that solved my problem: DONT minimise x360ce, and make sure the last thing you do in x360ce the motogp game is selected.
X360ce kept deselecting motogp and loaded up a different game, so it didn't work. So make sure your wheel is working in x360ce, then don't touch it, start the game.

 

[ziplob]

click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel. very easy mate tbh, set your rotation to 180 in the logitech software. add motogp to game settings, the start the game from there.