RD Series on Simracing.GP

Daily WTCR races on Simracing.GP Weekly GT3 Endurance races on Simracing.GP Weekly GT3 Sprint Races on Simracing.GP Weekly GT4 Sprint Races on Simracing.GP

MGP21 G29 Configuration of Wheel and Pedals

I have installed x360ce_64.exe in the Engine/Binaries /Win64 folder and executed the file, creating the following files x360ce.ini, ximput1_idll, xinput1_2.dll, xinput1_3.dll, xinput1_4.dll and xinput9_1_0.dll. When I open x360ce_64.exe I see a screen with all sorts of options. Along the top are selections for four different controllers, followed by Options, Game Settings, Controller Settings, Help and About selections. Below that, I've selected Logitech G HUB G29 Driving Force Racing Wheel USB. Directly below that are selections for General, Axis to Button, Advanced, Left Thumbn, Right Thumb and Force Feedback. Below is an image. What do I need to do ---step by step to map my G29 controller wheel and pedals to work. I cannot do it in game -the game does not recognize the G29. Thanks.
Moto Gp 21.JPG
 
click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel. very easy mate tbh, set your rotation to 180 in the logitech software. add motogp to game settings, the start the game from there.
 
i have g 27 but I think is the same , I will try to see the diference and if is possible good feeling to drive with steerimgwheel , thanks
 
click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel. very easy mate tbh, set your rotation to 180 in the logitech software. add motogp to game settings, the start the game from there.
I was able to do this: click right trigger, press record then press accelerater on g29 pedal. repeat steps for brake using left trigger, use left stick for steering wheel and set rotation to 180 in Logitech software. However , I could not add motogp to game settings or start the game from there . Not sure exactly where "there" is. When I launch the game from motogp21.exe the game launches but when I check controller options the g29 is not recognized. I only see keyboard or box controller options. Sorry, but I must be missing something??? Can you help?
 
look on the tab game settings in your picture. click that then click add game then link to the game location. The g29 will not appear in game it will make the game think that a xbox controller is plugged in then you can rebind buttons in game using you wheel. Your x360 is a old version, I use 4.17.15
Download link
This version auto saves profiles in the game folder, not requiring you to paste any files.
 
Last edited:

Kimmo Kokkonen

Lord GTR3, His master's voice
Step by Step guide video, hope this works and I can finally drive Kymiring with wheel!! Not yet tested, will test asap. Please try and tell if it works, thanks! Next week I will drive for the first time on the real Kymiring track so it would be nice to have few sim laps before that...MotoGP is the only sim we can drive Kymiring :( until AC version released.

 
I followed the directions in the video, but I wheel is still not being recognized. The other triggers and buttons ---accelerator, brake, upshift, downshift, and rear brake all seem to be recognized. When I empty the Stick Axis X slot and then select Record---nothing happens when I turn the wheel. I've posted a picture of the settings which may be helpful.
 

Attachments

  • moto gp 21 x360cesettings.JPG
    moto gp 21 x360cesettings.JPG
    113.6 KB · Views: 5

Kimmo Kokkonen

Lord GTR3, His master's voice
Finally, it works, I can drive MotoGP 20 with my G29 Wheel, setup is not yet perfect and driving is not too easy but I belive it can be better, but anyway I can drive with steering wheel. I bought this game in April or May 2020 and since then tried and tried, several hours lost for this but hey, never give up!!! I did everything just like presented in video except x360ce location, opened it from inside the game folder...:):):):):):):):):):):):)

Edit: also you should setup controller in the game, then it start working, only problem is that mouse cursor is not acting as normally, hard to see the cursor but mouse working still. Good luck!!!

cash-rain.jpg
 
Last edited:
Nice to hear that you were able to get your g29 to work. I'm still having a problem getting x360ce to recognize my wheel--pedals and paddles work. I put x360c in my C drive. I had it in the game folder but it seems to work better in the C drive. I also am having a problem with my mouse. The cursor flies all over the place and I cannot use it to navigate. Thoughts?
 

Kimmo Kokkonen

Lord GTR3, His master's voice
I can take few screenshots from my setup, hopelly this weekend, I did some changes what comes to brakes and throttle, then also mouse start working normally, also throttle works opposite way at the first time, that was very hard to learn, but now it works like a charm :)

Anyway my only problem still is the wheel rotation, I'm not able to use calibration feature from LG Control panel, button is disabled (grayed out). So that current rotation is for cars and makes bike riding a quite challenging and slow. But I can drive around etc.
 

Kimmo Kokkonen

Lord GTR3, His master's voice
Found better tool for G29, basic Game controller not support G29 wheel but G Hub supports, wow I'm learning new things...


Rotation setup tool G Hub


So my all problems with MotoGP 20 & steering wheel now solved!!! Screenshots later today.
 

Kimmo Kokkonen

Lord GTR3, His master's voice
Okay, I recorded video about my first laps with MotoGP 20 with G29 Steering wheel, important tips before you continue to solve this same issue we all have had:
1) setup x360ce for MotoGP.exe (see my setup image above in this thread)
2) setup Logitech G Hub (see my setup image above in this thread)

The most important thing is that do not close those 2 applications when you start MotoGP, just minimize them. Otherwise wheel not work correctly or not at all.

Finally you can do this
 
Last edited:
Top