Cars Ford Sierra Cosworth RS500 Pack 3.11

irzult · Jan 11, 2023

Great job! Thanks!
There is a good feeling and good physic.
I've made the animation for wippers on the basic model of this car. I work for the other models.
If you want the wiper work, copy the following lines in ext-config.ini. You can find it her ....assettocorsa\content\cars\ford_sierra_cosworth_rs500\extension

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1

[ANIMATED_WIPER_...]
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorleft_SUB4@A=*', 'rdvorleft_SUB0@A=*', 'rdvorleft_SUB1@A=*', 'rdvorleft_SUB3@A=*'
GROUP_0_ANGLE_FROM = 0.600000
GROUP_0_ANGLE_TO = -77.199997
GROUP_0_AXIS = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = 0.028897, 0.981443, 0.675538
GROUP_0_PIVOT = -0.576439, 0.942429, 0.734756
GROUP_0_BASE_AXIS = 0.000000, 0.707107, 0.707107
GROUP_0_BASE_PIVOT = -0.576439, 0.942429, 0.734756
GROUP_1 = 'rdvorright_SUB4@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB3@A=*', 'rdvorright_SUB0@A=*'
GROUP_1_ANGLE_TO = -82.099998
GROUP_1_AXIS = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_0 = -0.061586, 0.863111, 0.501245
GROUP_1_AXIS_OFFSET_1 = -0.061586, 0.863111, 0.501245
GROUP_1_END = 0.587585, 0.967995, 0.630875
GROUP_1_PIVOT = -0.044708, 0.951714, 0.817169
GROUP_1_RUBBER_FROM = 0.066703, 0.958205, 0.723849
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.010100
GROUP_1_RUBBER_OFFSET_EXP = 2.005000
GROUP_1_RUBBER_OFFSET_POS = 0.520000
GROUP_1_RUBBER_TO = 0.586701, 0.962376, 0.628007
GROUP_1_BASE_AXIS = 0.000000, 0.707107, 0.707107
GROUP_1_BASE_PIVOT = -0.044708, 0.951714, 0.817169
GROUP_2 = 'boot_ok_SUB6@A=*', 'boot_ok_SUB2@A=3-5', 'boot_ok_SUB1@A=3,5', 'boot_ok_SUB5@A=3-9,11'
GROUP_2_ANGLE_FROM = 4.300000
GROUP_2_ANGLE_TO = -89.500000
GROUP_2_AXIS = 0.000000, 0.707107, -0.707107
GROUP_2_AXIS_OFFSET_0 = 0.000000, 0.707107, -0.707107
GROUP_2_AXIS_OFFSET_1 = 0.000000, 0.707107, -0.707107
GROUP_2_END = -0.478778, 0.948668, -1.969482
GROUP_2_PIVOT = 0.192047, 0.926628, -2.166443
GROUP_2_SCALE_LUT = '(|-0.002=1.064|0.991=1.057|)'
GROUP_2_BASE_AXIS = 0.000000, 0.707107, -0.707107
GROUP_2_BASE_PIVOT = 0.192047, 0.926628, -2.166443

=LM=908GTS · Jan 11, 2023

irzult said:
Great job! Thanks!
There is a good feeling and good physic.
I've made the animation for wippers on the basic model of this car. I work for the other models.

Nice ! Thank you for this effort.

irzult · Jan 11, 2023

You're welcome

For the drift model.
Copy the following lines in ext-config.ini. You can find it her ....assettocorsa\content\cars\ford_sierra_cosworth_rs500_drift\extension

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1

[ANIMATED_WIPER_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB3@A=*', 'rdvorright_SUB4@A=*', 'wiper_rubber_right1@A=*', 'wiper_rubber_right0@A=2-3', 'wiper_rubber_right2@A=*'
GROUP_0_ANGLE_TO = 83.400002
GROUP_0_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = -0.595669, 0.908395, 0.825310
GROUP_0_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_0_RUBBER_FROM = -0.073405, 0.911111, 0.899772
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.009500
GROUP_0_RUBBER_OFFSET_POS = 0.504000
GROUP_0_RUBBER_TO = -0.596485, 0.907397, 0.825028
GROUP_0_BASE_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_BASE_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_1 = 'wiper_rubber_left0@A=1,3', 'rdvorleft_SUB4@A=*', 'wiper_rubber_left2@A=1-5,7', 'rdvorleft_SUB3@A=*', 'wiper_rubber_left1@A=*'
GROUP_1_ANGLE_TO = 77.199997
GROUP_1_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_1_END = -0.032001, 0.939052, 0.861561
GROUP_1_PIVOT = 0.575825, 0.926242, 0.923027
GROUP_1_SCALE_LUT = '(|0.000=1.000|1.004=1.032|)'
GROUP_1_BASE_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_BASE_PIVOT = 0.575825, 0.926242, 0.923027

irzult · Jan 11, 2023

the DTM model

[WIPERS]
FRONT_0=wiper_rubber_1
FRONT_1=
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2

[ANIMATED_WIPER_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB2@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB0@A=*', 'rdvorright_SUB4@A=*', 'rdvorright_SUB3@A=*', 'wiper_rubber_1@A=*'
GROUP_0_ANGLE_FROM = -9.300000
GROUP_0_ANGLE_TO = 59.900002
GROUP_0_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_AXIS_OFFSET_0 = -0.074034, 0.902116, 0.425095
GROUP_0_AXIS_OFFSET_1 = -0.074034, 0.902116, 0.425095
GROUP_0_BENDING_FROM = 0.000000
GROUP_0_BENDING_TO = 0.000000
GROUP_0_END = 0.040615, 1.213572, 0.406586
GROUP_0_PIVOT = -0.008989, 0.912306, 0.993240
GROUP_0_RUBBER_FROM = -0.052998, 0.934456, 0.845660
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011300
GROUP_0_RUBBER_OFFSET_POS = 0.501000
GROUP_0_RUBBER_TO = 0.045666, 1.214290, 0.398079
GROUP_0_TWIST_FROM = 0.262000
GROUP_0_TWIST_TO = 1.000000
GROUP_0_BASE_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_BASE_PIVOT = -0.008989, 0.912306, 0.993240

irzult · Jan 11, 2023

the rally model

[WIPERS]
FRONT_0=wiper_rubber_left2
FRONT_1=wiper_rubber_right2
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1

[ANIMATED_WIPER_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB3@A=*', 'rdvorright_SUB4@A=*', 'wiper_rubber_right1@A=*', 'wiper_rubber_right0@A=2-3', 'wiper_rubber_right2@A=*'
GROUP_0_ANGLE_TO = 83.400002
GROUP_0_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = -0.595669, 0.908395, 0.825310
GROUP_0_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_0_RUBBER_FROM = -0.073405, 0.911111, 0.899772
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011800
GROUP_0_RUBBER_OFFSET_POS = 0.504000
GROUP_0_RUBBER_TO = -0.604965, 0.902618, 0.819839
GROUP_0_BASE_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_BASE_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_1 = 'wiper_rubber_left0@A=1,3', 'rdvorleft_SUB4@A=*', 'wiper_rubber_left2@A=1-5,7', 'rdvorleft_SUB3@A=*', 'wiper_rubber_left1@A=*'
GROUP_1_ANGLE_TO = 77.199997
GROUP_1_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_1_END = -0.032001, 0.939052, 0.861561
GROUP_1_PIVOT = 0.575825, 0.926242, 0.923027
GROUP_1_RUBBER_FROM = 0.495503, 0.903212, 0.855376
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.009000
GROUP_1_RUBBER_OFFSET_POS = 0.575724
GROUP_1_RUBBER_TO = -0.037567, 0.925999, 0.850632
GROUP_1_SCALE_LUT = '(|0.000=1.000|1.004=1.032|)'
GROUP_1_BASE_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_BASE_PIVOT = 0.575825, 0.926242, 0.923027

irzult · Jan 11, 2023

The groupe A model

[WIPERS]
FRONT_0=wiper_rubber_left2
FRONT_1=wiper_rubber_right2
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS]
FRONT_0=wiper_rubber_1
FRONT_1=
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2

[ANIMATED_WIPER_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB2@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB0@A=*', 'rdvorright_SUB4@A=*', 'rdvorright_SUB3@A=*', 'wiper_rubber_1@A=*'
GROUP_0_ANGLE_FROM = -9.300000
GROUP_0_ANGLE_TO = 59.900002
GROUP_0_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_AXIS_OFFSET_0 = -0.074034, 0.902116, 0.425095
GROUP_0_AXIS_OFFSET_1 = -0.074034, 0.902116, 0.425095
GROUP_0_BENDING_FROM = 0.000000
GROUP_0_BENDING_TO = 0.000000
GROUP_0_END = 0.040615, 1.213572, 0.406586
GROUP_0_PIVOT = -0.008989, 0.912306, 0.993240
GROUP_0_RUBBER_FROM = -0.052998, 0.934456, 0.845660
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011300
GROUP_0_RUBBER_OFFSET_POS = 0.501000
GROUP_0_RUBBER_TO = 0.045666, 1.214290, 0.398079
GROUP_0_TWIST_FROM = 0.262000
GROUP_0_TWIST_TO = 1.000000
GROUP_0_BASE_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_BASE_PIVOT = -0.008989, 0.912306, 0.993240
[WIPERS_TRACE_...]
SURFACE=glass_in
WIPERS=wiper_rubber_left2,wiper_rubber_right2