• Welcome to the largest (sim) racing website in the world!
    Blurring the line between real and virtual motorsports.

ACC VIEW SETTINGS INFO HELP

Discussion in 'Assetto Corsa Competizione' started by M D Gourley, Jun 8, 2019.

  1. M D Gourley

    M D Gourley
    Premium

    Messages:
    900
    Ratings:
    +974
    Hello everyone,
    Really liking ACC 1.0.1 at the moment, but does anyone have time to give me some info on what some of the settings in the 'View Settings' do as adjusting them I can not see any change.
    Settings that I would like to know what these do are...'Movement' / Dashcam Factor / LWW Gamma / LWW Smooth...the others are ok.
    I would also like to lessen the tilting from side to side in 'Helmet Cam' when turning corners...is this possible.
    Thanks in advance.
    ACC VIEW SETTINGS.jpg
    Really Liking the 'Projection Correction' feature, it's almost like Triple Screen support.
    This screen shot with no Projection Correction 0.0 setting
    1 ACC PROJECTION CORRECTION 0 copy.jpg
    The below screen shot with a 'projection Correction of 0.3...which brings the steering wheel and dash read out closer without making the right side external mirror disappear to much....so using this feature with 'Distance' and 'FOV' it is very good...personal opinion only.
    2 ACC PROJECTION CORRECTION 0 3 copy.jpg
     
    Last edited: Jun 8, 2019
  2. DrRob

    DrRob

    Messages:
    179
    Ratings:
    +86
    Not on top of things with all these settings, but I can maybe shed some light on some of them. Maybe somebody else can also pitch in.

    LWW = Look with wheel. All these settings are "look into corner" options. You turn the wheel, the camera adjusts viewpoint in that direction. Basically to help to look to the apex, when you're on a single screen. I used it at some point, but found it distracting.

    I think the "helmet cam" is supposed to do a pronounced head movement. Not sure you can reduce it via the options. Maybe with "movement" or is it grayed out? I do not used this particular view as I find it not really useful to accurately hit the apexes and generally find my line.

    Movement = I reduced it to 0% and think I have less movement of the actual camera in the in cockpit view when e.g. going over crests. But not completely sure as the effect from 0% to 100% was minimal (for me).

    Dashcam Factor = No idea, doesn't do much in the in-car view I use IIRC.
     
    • Like Like x 1
  3. M D Gourley

    M D Gourley
    Premium

    Messages:
    900
    Ratings:
    +974
    Thanks for taking the time to reply...LWW = Look with Wheel...will try this out....as for the others such as 'Movement', I too had the same minimal effect from 0 -100%:)
     
    • Beer Beer x 1
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.