FFB Project CARS2

FFB Project CARS2 FFB v3.0 - TEST PORSCHE TAYCAN

Login or Register an account to download this content
Overview Updates (10) Reviews (60) History Discussion
Ask a question
Reviews (60) History
Latest Most helpful User rating
skylinegtr34
superd, with ts xw sparco 310, this ffb it's really enjoy, before i use the jack spade, but after patch, i don't find any setup really good, this it's solution.
only one question: if possible have a little bit more ffb on bump in breaking point?? exaple, i try 488gt3 on monza, at first chicane, the asphalt it's very bumpy, but on wheel i feel too low bump, how setting need increase?? thanks!!
SlawekTX3
SlawekTX3
Thanks for your return. The new version corrects quite a lot of worries. I still have to close the new explanatory pdf and it will come out.
Upvote 0 Downvote
D
First time I can do consistent lap times with my tmx, AMAZING !
Upvote 0 Downvote
S
I've been struggling to get my T150 (same as TMX) cheapo wheel working well in pcars2 for ages now, but now that i've tried this it suddenly transformed into something beautiful. Now i can catch cars sliding, drift, do fast racing on complicated tracks, etc. no problem. Truly spectacular work.
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
Enderlyn
excelente
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
Jason Mullin
Ian Bell you need to pay very close attention to this mod because it seriously transforms the game into something very special.
Thank you Slawek for sharing it with us, it deserves 1000 stars.
Upvote 0 Downvote
JoopNL
Improves FFB very much on Fanatec CSW 2.5!
I only have an issue that the kerbs feel very Sharp/Hard. Is there any way to tone this down a bit? I looked at editing the file, but it wasn't obvious to me which settings to adjust. If you could give some pointers to which settings I could experiment with, it would be very much appreciated!!
SlawekTX3
SlawekTX3
Hello, I invite you to decrease the parameters TONE and FX in the game to begin.
Upvote 0 Downvote
M
Ecellent! A game changer!
SlawekTX3
SlawekTX3
thanks
Upvote 0 Downvote
V
I tried many FFB_Custom_files, This is the best
SlawekTX3
SlawekTX3
Thanks
Upvote 0 Downvote
H
Amazing job!
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
G
Thnx man, great work! But i got an issue with my t-gt wheel, it cannot work with pc2 on pc=( when i pick up custom wheel- it says that not all setting applyed, i dont know what i have to do with it
Upvote 0 Downvote
Ihab Abbas
Premium
Great feeling. Thanks so much. But I need help as my G29 doesn't lock to 570. I did it several times, but once I go try it on the track it gives me full rotation. any help with that?
Upvote 0 Downvote
U
I have been pretty much using Jack Spades FFB settings since they were originally released and updated when needed, I found his settings to really bring my TX to life once i tinkered with a few in game settings. However ive now tried these settings an initially the FFB felt weak and lackluster. again by simply following the advice also given within the download, i tinkered with the gain slightly and the volume and i have staright away beaten a few of my current PB's on some tracks. The FFB feels very balanced and oddly feels like I can feel the weight transfer and feel the loss of control better. Excellent job with these settings and highly recommend, but you do need to play with the in game strengths to find what works for you better.
Upvote 0 Downvote
Ciba1991
Actually enjoying this more than Jack Spades work, which is already really good. Great feeling on the T-GT, but had to put gain to 100, recommended values did not work for me. Other than that i would mention that there is a bit of clipping on the high end, nothing too major, and i had to add a bit more deadzone removal. But otherwise keep up the excellent work!
SlawekTX3
SlawekTX3
Thank you for your message. Yes, TG-T is a complex base to settle. Much more complex than the TS-PC for example. Then, we all have our small requirements, so we must adapt according to your tastes. But I am very happy that my work has been a good foundation for you. I will certainly propose an update of the file because I had quite a return private with the right indications to follow.
Upvote 0 Downvote
nicsos123
It's good thx
Upvote 0 Downvote
CarlosDL89
Hi, a game changer fantastic!
I'm on a CSL Elite and I feel a rumble/vibration through the ffb when I'm steering in speed and I feel too much road noise on the wheel on the straights. I set the FX to 0, but still remains.
is there a way to take this effects off?
Upvote 0 Downvote
R
Ottimo lavoro!
Upvote 0 Downvote
bbspadon
Very informative about front tyres, one of the best ffb about that! But sadly not enough information about rear tyres or rear train, so actually this FFB is mostly incomplete. You're on the path, keep going. For now, Jack Spade files are more complete, even less specific ;-)
SlawekTX3
SlawekTX3
I invite you to work on your own version and not to copy on others. Maybe it will be beneficial. Personally, I did not have negative feedback about the rear tires ;-)
Upvote 0 Downvote
Z
My TM TX can only go to 900, not to 1080 degrees. What should I do?
Upvote 0 Downvote
J
Using the Thrustmaster TGT.
This update does not work with the Thrustmaster T-GT.
The 4.1 worked wonders. This 5.1 update makes everything feel sluggish.
Upvote 0 Downvote
M
Uhm.. How is this realistic? I'd have to make a 180 degrees turn to make a small angled corner? Like 360 degrees for a sharp turn??? This is horrible...
Upvote -3 Downvote

Latest News

What does easier access mean to you?

  • Free access

    Votes: 104 71.2%

  • Better structured events

    Votes: 37 25.3%

  • Better structured forum

    Votes: 28 19.2%

  • Standard game content

    Votes: 30 20.5%

  • No 3pa registration pages

    Votes: 30 20.5%

  • Too casual

    Votes: 11 7.5%

  • Other, please post

    Votes: 8 5.5%
See comments…
Back
Top