pflynhi's ACC triple screen settings

Rory Wetherington

pflynhi
Original poster
Jun 19, 2009
219
267
Hey all,
I just wanted to pass along my personal setting's , as we all know this game can be quite taxing on one's PC so finding that sweet spot can be a lot of trial and error, hopefully this will save some folks a little time.

Here's my PC specs : R5 2600x, 32gb 3000hz ram, evga 2070 super, 3x32" 75hz monitors

I have tested and tweaked all the settings with the aim at a steady 75fps to match my monitors refresh rate, I've also tested in all conditions dry,wet,day,night, etc. low fps in the high 50's-low 60's, and highest rates hopefully at 75fps as I use vsync. On average I usually get 60-70 fps.

Updated for V.1.5.0 on July 19, 2020
20200719205002_1.jpg

20200719205014_1.jpg

20200719205030_1.jpg

hud settings
hudset.jpg

in game shots
ingame1.jpg

ingame2.jpg


Please note: With Version 1.3.6 I'm not using ANY changes to the engine file.

***optional***
Optional Engine.ini file using the UE sharpening tweek as suggested by Georg Ortner by adding the following to the end of the engine.ini file as well as including the file itself.

[ConsoleVariables]
r.TemporalAACatmullRom=1
r.TemporalAAPauseCorrect=1
r.TemporalAASamples=4
r.Tonemapper.Sharpen=2

engine.ini (backup or rename your original first) goes in the following location...
C:\Users\xxxx\AppData\Local\AC2\Saved\Config\WindowsNoEditor

graphics sets go in the following locations...
C:\Documents\Assetto Corsa Competizione\Customs\VideoSettings
these can be accessed in game under video options/manage custom video presets

hopefully this will help someone or at least give a good starting point.
 

Attachments

Last edited:

JoelGL

1000RPM
Oct 16, 2013
1,401
132
What monitors do you have? I have a similar 32” 1440p 75hz (single though) and thinking of using 2 smaller 24” side monitors at 1080p.
 

Rory Wetherington

pflynhi
Original poster
Jun 19, 2009
219
267
I have 3 Sceptre 32" 75hz curved monitors, kinda regret buying them but I built my triples after getting my rift, I'm backwards I guess but I wanted to have options lol.
 
  • Like
Reactions: JoelGL

Rory Wetherington

pflynhi
Original poster
Jun 19, 2009
219
267
advanced sharpening disabled? You also don't use Reshade?
No Reshade, and I disabled advanced sharpening because it say's to use if you leave Sharpening at the default 80 setting. If been testing ranges from 100 to 200.
Hope that helps.
 
  • Like
Reactions: JoelGL

Phil Dufour

100RPM
Nov 28, 2010
121
68
Thanks for sharing......I´m new on ACC and it´s a lot of graphic oprions to manage...Can you share a screenshot with your settings?.
 

2stains

1000RPM
Jan 27, 2016
1,230
906
46
Mirrors suck hard in ACC in performance as well as visual! I hope Kunos have more to offer on performance side!
 

DrRob

500RPM
Jan 7, 2017
929
786
45
What monitors do you have? I have a similar 32” 1440p 75hz (single though) and thinking of using 2 smaller 24” side monitors at 1080p.
Not an expert here, but I haven't seen an option in ACC, where you could run monitors at different vertical resolutions in a triple screen setup. You'd have to sacrifice a bit res on the main monitor and would have to reduce to 1080p to I reckon.
I stand to be corrected.
 

Rory Wetherington

pflynhi
Original poster
Jun 19, 2009
219
267
If you find your struggling maintaining steady fps, try capping your framerate limit ( I use 60 to have a little headway and it seems to give smoother game play), if you still find it struggling look at lowering Vol. fog, mirror res, mirror distance, post processing, shadow distance and shadows. I would only lower 1 at a time until you find the sweet spot.
 
  • Like
Reactions: Timbaterror