Few posts back I already wrote the step-by-stepsame
Few posts back I already wrote the step-by-stepsame
This is very unusual. I never had a problem like that with any of the tracks and cars. All I can recommend is to try with official cars only (player and AI). Other than that you can try reinstalling CSP by changing its version down and up. Here's how my AI settings for CSPLove this mod, but my game crashes if i more than 5 or 6 AI or drive 300+ kph for a few seconds. My game freezes up and i have to close the warning log. It gives me warning about AI spline missing or broken. Not sure if its GPU or CPU as i run 5900x and a 3080; Still great to be able to run with ai cars for a few minutes.
Thank you so much for your reply!This is very unusual. I never had a problem like that with any of the tracks and cars. All I can recommend is to try with official cars only (player and AI). Other than that you can try reinstalling CSP by changing its version down and up. Here's how my AI settings for CSP
View attachment 706497
Hi,I followed the instructions for installing (manually)
I’m on the latest, CSP 0.2.3 and Pure 0.238. I followed you step-by-step to the letter, even saved a doc with the photos you’ve made on Aug 30, 2023. Is it supposed to be used just with SRP 0.9.1? On 0.9.2 if I install the new traffic plan even the standard [shibaura_pa_traffic] doesn’t load anymore. Initially I tried it on 0.9.3 but, because it didn’t load, I tried installing on 0.9.2 but still without success. Should I look for 0.9.1?Hi,
I wrote a step-by-step sometime ago and from your post I can't understand if you followed that. If you did then the Track day session should work fine. Also I'm curious what version of CSP are you on?
csp is most likely too new as i had the same problem last week and fixed it by downgrading.Hi,
I wrote a step-by-step sometime ago and from your post I can't understand if you followed that. If you did then the Track day session should work fine. Also I'm curious what version of CSP are you on?
Also, the newest srp doesn't work with ai flood anymore i don't think per patch notes.I’m on the latest, CSP 0.2.3 and Pure 0.238. I followed you step-by-step to the letter, even saved a doc with the photos you’ve made on Aug 30, 2023. Is it supposed to be used just with SRP 0.9.1? On 0.9.2 if I install the new traffic plan even the standard [shibaura_pa_traffic] doesn’t load anymore. Initially I tried it on 0.9.3 but, because it didn’t load, I tried installing on 0.9.2 but still without success. Should I look for 0.9.1?
I don’t believe CSP has anyting to do with this issue. If this had been the case, all tracks shouldn’t have loaded the AIspline, but SRP is the only one that doesn’t load.csp is most likely too new as i had the same problem last week and fixed it by downgrading.
Now i have an issue myself.
Every race i have at least 1 car that is off pace and not driving at the same speeds as everyone else (racing) and it slows down or causes wrecks on the 3 lane sections. They're always in the middle lane driving roughly half the speed as the other cars. Last time i tried running 18ish cars and i had to knock it down to 15 before i gave up and didn't want to sacrifice too many cars.
Absolutely not! Thank you anyway for taking the time to reply. So the traffic plan was meant to be used initially with 0.9.1. I’ll install that one hopefully I’ll find the problem. I believe some generated settings are stored somewhere in a file and that is what causes this not to work. When/if I find a solution I’ll post back here.Hope you don't find this rude, guys. I'm still on 0.9.1 and CSP 0.1.80 pr115 from 2 years back.