I bought the Pedals used and cheaply, I'm not familiar with what maintenance may be required.
The brake can become stuff fully on (according to the PC), if you press it partially it will behave as partially pressed but when let go it becomes 100% pressed.
Other times it just doesn't respond at all.
Reconnecting the USB cable can clear the problem and allow me to cross my fingers for another chance of trouble free braking.
I also have set the sensitivity to 10 to get some kind of varying degrees of braking between 0 and 100%. You also have to press pretty damn hard on the brake to get it 100%.
So I might have two issues, or one - I don't know, any suggestions? thanks
The brake can become stuff fully on (according to the PC), if you press it partially it will behave as partially pressed but when let go it becomes 100% pressed.
Other times it just doesn't respond at all.
Reconnecting the USB cable can clear the problem and allow me to cross my fingers for another chance of trouble free braking.
I also have set the sensitivity to 10 to get some kind of varying degrees of braking between 0 and 100%. You also have to press pretty damn hard on the brake to get it 100%.
So I might have two issues, or one - I don't know, any suggestions? thanks