Misc [Car Data] F1 BMIG and DIFF Control [DEPRECATED]

[VRC - Schmawlik]

no i an driving with my own custom build steering wheel with a buttonbox interface controlling my buttons

Oh ok, looks like I'll have to update this mod to support that. Sorry, it will be a little bit longer until you can use this, but I'll make sure I get you to that point!

 

[VRC - Schmawlik]

Hi,

I'm not using switch
[EXT_CONTROLS]
ACTIVE = 1

and BMIG is not working. (ext A,B)
On screen shows: Brake Migration: NAN/NAN

Everything else is ok. (C,D,E,F)

Thanks a lot!

Most likely an installation error, NAN/NAN is what will pop up if not everything was installed properly.

 

[ollieclark118]

Oh ok, looks like I'll have to update this mod to support that. Sorry, it will be a little bit longer until you can use this, but I'll make sure I get you to that point!

ahh okay, any ideas how long that will take

 

[VRC - Schmawlik]

ahh okay, any ideas how long that will take

Maybe end of the week, after my finals. Probably sooner, but I also don't wanna promise anything.

 

[ollieclark118]

Maybe end of the week, after my finals. Probably sooner, but I also don't wanna promise anything.

sounds good, does it work with keyboard inputs as i can emulate keyboard inputs with my wheel

 

[VRC - Schmawlik]

sounds good, does it work with keyboard inputs as i can emulate keyboard inputs with my wheel

I think it only looks for Joystick inputs atm.

 

[ash3]

Most likely an installation error, NAN/NAN is what will pop up if not everything was installed properly.

Typo?

[CUSTOM_SCRIPT_ITEM_1]
ID=BRAKE_MIGRATION
...

[CUSTOM_SCRIPT_ITEM_1]
ID=BRAKE_MIGRATION_RAMP
...

 

[VRC - Schmawlik]

Schmawlik updated [Car Data] F1 BMIG and DIFF Control with a new update entry:

Typo in setup.ini instructions

Here is the updated setup.ini data.

Thanks @ash3 for the catch.

/////////////////////////////////////////////////////
;BRAKES
/////////////////////////////////////////////////////

[FRONT_BIAS]
SHOW_CLICKS=0
TAB=BRAKES
NAME=Total Brake Bias
MIN=54
MAX=64
STEP=1
POS_X=0.5
POS_Y=0
HELP=HELP_BRAKE_BIAS

[CUSTOM_SCRIPT_ITEM_0]
ID=BRAKE_BIAS_FINE
SHOW_CLICKS=0
TAB=BRAKES
NAME=Brake Bias Fine
LUT=ebb_fine_setup.lut
DEFAULT=0
POS_X=0.5
POS_Y=1
HELP=NULL...

Read the rest of this update entry...

 

[VRC - Schmawlik]

Typo?

[CUSTOM_SCRIPT_ITEM_1]
ID=BRAKE_MIGRATION
...

[CUSTOM_SCRIPT_ITEM_1]
ID=BRAKE_MIGRATION_RAMP
...

Haha, indeed, thanks!

 

[Chris Knowles]

Hi, do I need to install this for it to show on the rss screen mod and is this the screen that shows a 55, 56 etc with a white background

Thanks

 

[Clay37]

Send me your setup.ini, I might be able to fix the brake pressure not showing up for you.

I'll do that tomorrow. You are awesome bro, just amazing

 

[ollieclark118]

Do you have discord??

 

[VRC - Schmawlik]

Do you have discord??

Schmawlik#0054

 

[Clay37]

Send me your setup.ini, I might be able to fix the brake pressure not showing up for you.

Tis is the 21 hybrid
Thanks a lot!!!!

 

[rob 2fast4u]

can't seem to make the controls work with an xbox controller using the ext_control folder

 

[VRC - Schmawlik]

can't seem to make the controls work with an xbox controller using the ext_control folder

Currently this mod does not support non wheel type input devices.

 

[rob 2fast4u]

Currently this mod does not support non wheel type input devices.

okay, I can emulate through steam but still doesn't seem to work off keyboard keys... Also after reinstalling the newer version, I just noticed the updated brake bias is not showing total bias on the display any help on this? I am using your latest display on the 2023 RSS

 

[Clay37]

Send me your setup.ini, I might be able to fix the brake pressure not showing up for you.

Hi!
As I have Fe brake bias, traction control, abs, all settings from ERS from Simhub (Nextion, from there to display) I still have to set them in CM. When I see the new car ini, it looks like you can do brake bias fine tune and others on the fly now. Is this correct?

 

[VRC - Schmawlik]

Hi!
As I have Fe brake bias, traction control, abs, all settings from ERS from Simhub (Nextion, from there to display) I still have to set them in CM. When I see the new car ini, it looks like you can do brake bias fine tune and others on the fly now. Is this correct?

Yes, this is correct. You can even bind a button for Lewis Hamilton’s infamous “Brake Magic”

 

[Clay37]

Yes, this is correct. You can even bind a button for Lewis Hamilton’s infamous “Brake Magic”

Although I have a ton of rotaries, buttons and a funky switch I'm kind of running out of options. Your work is so full of possibilities and chances. Really amazing