AMS with T300RS Wheel/Servo and Fanatec Clubsport V3 Pedals

[Michel Bélisle]

I wonder if AMS supports two separate controllers like iRacing, AC, Projects Cars 2 and others.

I am thinking to keep my T300RS wheel for the moment and just upgrade to Fanatec Clubsport V3 pedals.

I wonder if anyone has ever tried that combination?

 

[DaVeX↯]

I wonder if AMS supports two separate controllers like iRacing, AC, Projects Cars 2 and others.

I am thinking to keep my T300RS wheel for the moment and just upgrade to Fanatec Clubsport V3 pedals.

I wonder if anyone has ever tried that combination?

Ams supports at least 6 devices so you should be ok

 

[Pappa_G_27]

Yep sure does. Running V3's with a t300 and the TH8A shifter in AMS. Its a pretty good combination, I upgraded to the v3 pedals over a year ago and are completely worth the upgrade. The t300 wheel is good enough for now, and will probably stick with it until it dies.

 

[M.Guenette]

The T300 is a fine wheel as is the TX. Just don't get your hands on a Direct Drive Wheel , otherwise you will know what your missing.
I believe AMS does support up to six devices

 

[Michel Bélisle]

I am happy with the wheel. I would like more feel from the pedals though.

 

[Ken Bell]

I have a T300 and Fanatec Clubsport V3 pedals and cannot get the pedals configured.

 

[JoelGL]

I have a T300 and Fanatec CSR Elite Pedals, the they work fine, in all sims I've tried (ie. AC, ACC, AMS1, AMS2, rF2, R3E, GTR2).

 

[Ken Bell]

I will try again after a few days off from it all.
@JoelGL , my wheel (T300 with F1 rim) and Fanatec Clubsport V3 pedals work in AC, ACC and Raceroom ok.
Just bought AMS2 and couldnt calibrate them. But I will try again. Any tips?

 

[Pappa_G_27]

I will try again after a few days off from it all.
@JoelGL , my wheel (T300 with F1 rim) and Fanatec Clubsport V3 pedals work in AC, ACC and Raceroom ok.
Just bought AMS2 and couldnt calibrate them. But I will try again. Any tips?

Have you assigned each of the controls in the edit assignments first? Do this then go calibrate wheel and then pedals.

 

[Ken Bell]

Have you assigned each of the controls in the edit assignments first? Do this then go calibrate wheel and then pedals.

No, I don’t think I have. I will check first thing in the morning. Thank you for that Pappa.

 

[JoelGL]

No, I don’t think I have. I will check first thing in the morning. Thank you for that Pappa.

Right, as @Pappa_G_27 suggested. Happened to me a couple of times, after deleting the AMS2 folder in My Documents during earlier Beta updates...forget that you first have to re-assign brakes/throttle again in Edit Config, then you can do the calibration.