Model: MMS M17c
Version: V1.0
Do not redistribute, re-host, unpack or share this content without permission from myself or (https://www.facebook.com/monashmotorsport)
Install:
Unzip “m17c.zip”, and paste into assetto corsa/content/cars in your respective installation location
Note:
This car was originally produced as a method for track visualisation within the team, and along the way I have had a go at modelling the vehicles handling. The result it a car that is drive-able but is far from forgiving. The purpose of releasing the model is to allow other members of the FSAE community a chance to see how we did it in 2017 and improve upon the result.
The data file has been left unlocked, have play and tune whatever parameters you desire and see how the vehicle responds. If you land on a tune that is an improvement on the existing model let me know!
Skins:
I’ve included the full sponsored livery of the car, as well as a second blank template that should give you an idea of what to edit. Again, if you have a sick custom livery let me know and I will update the resource to include it.
Setup:
The tyre modelling is not perfect, as a recommended setup to avoid mass burnout:
Known issues:
Brake shudder: The car will shudder from side to side while under brakes, it's mitigated by avoiding mid-corner braking. Change DXY from -0.043 to -0.025 in tyre.ini to reduce the severity.
Front wheel glitching: Sometimes under hard braking, whilst cornering, a front wheel may decide to flip around and point backwards. Doesn't happen very often but it will take you by surprise when it does.
General 3D model issues: In terms of 3D modelling it's rough in some areas, there will be textures that don't line up or components poking through here and there. I have done my best to setup the animations so they aren't distracting from the experience.
Recommended Circuits:
Formula Student Skidpad/Acceleration -
Formula Student Autocross/Edurance -
Formula Student UK 2020
www.racedepartment.com
Credits:
Cheers to the members of the community for giving advice along the way re setup of the car and understanding the areas of the car that I did not play a role in designing (there's a lot of them). Thanks to garyjpaterson for his ksEditor advice and also a stunning Hoosier tyre texture.
Photos:
Version: V1.0
Do not redistribute, re-host, unpack or share this content without permission from myself or (https://www.facebook.com/monashmotorsport)
Install:
Unzip “m17c.zip”, and paste into assetto corsa/content/cars in your respective installation location
Note:
This car was originally produced as a method for track visualisation within the team, and along the way I have had a go at modelling the vehicles handling. The result it a car that is drive-able but is far from forgiving. The purpose of releasing the model is to allow other members of the FSAE community a chance to see how we did it in 2017 and improve upon the result.
The data file has been left unlocked, have play and tune whatever parameters you desire and see how the vehicle responds. If you land on a tune that is an improvement on the existing model let me know!
Skins:
I’ve included the full sponsored livery of the car, as well as a second blank template that should give you an idea of what to edit. Again, if you have a sick custom livery let me know and I will update the resource to include it.
Setup:
The tyre modelling is not perfect, as a recommended setup to avoid mass burnout:
- Set ambient temp to 30 ° C or higher
- Tyre wear at 1X or Off
Known issues:
Brake shudder: The car will shudder from side to side while under brakes, it's mitigated by avoiding mid-corner braking. Change DXY from -0.043 to -0.025 in tyre.ini to reduce the severity.
Front wheel glitching: Sometimes under hard braking, whilst cornering, a front wheel may decide to flip around and point backwards. Doesn't happen very often but it will take you by surprise when it does.
General 3D model issues: In terms of 3D modelling it's rough in some areas, there will be textures that don't line up or components poking through here and there. I have done my best to setup the animations so they aren't distracting from the experience.
Recommended Circuits:
Formula Student Skidpad/Acceleration -
Formula Student Skidpad + Accel
For those looking to have a platform that allows them to benchmark a set of setups this is may be helpful. The following download contains a set of two track configurations: Skidpad and Acceleration. They are intended to assist in calibrating...
www.racedepartment.com
Formula Student Autocross/Edurance -
Formula Student AutoX/Endurance
Following from the previous Skidpad/Accel track here is another set of configurations similar to the AutoX/Endurance events. The following download contains a set of two track configurations: FSG1 and TOM1. Each have a track width of 4.5m, with a...
www.racedepartment.com
Formula Student UK 2020
Formula Student UK 2020 - Sprint
The official IMechE Formula Student UK 2020 Sprint Course Thank you for downloading The track mod replicates the Formula Student UK sprint course located at the Silverstone circuit. The cones are laid out along Copse corner and part of the...
www.racedepartment.com
Credits:
Cheers to the members of the community for giving advice along the way re setup of the car and understanding the areas of the car that I did not play a role in designing (there's a lot of them). Thanks to garyjpaterson for his ksEditor advice and also a stunning Hoosier tyre texture.
Photos:
![FSAE: Michigan - AutoX '18 [Beta]](/data/resource_icons/21/21013.jpg?1599472916){kind=icon}
