Automatic Camera Angle Switcher 1.5.4

Fixed a problem with CSP v0.1.80-preview348 or higher that caused an error in OBS output and stopped.
(May not work for CSP v0.1.80-preview348 (build 2503) or lower)

Fixed a problem in which OBS libraries could not be loaded and stopped with an error if CSP is less than v0.1.80-preview348 (build 2503).
(If less than CSP v0.1.80-preview348 (build 2503), the output to OBS will not be available.)
When pausing a game or replay, the camera angle will also pause.

Fixed a bug that caused the driver viewpoint side to fade in and out when entering AFK mode during OBS output.

ver1.5.1
Added fade-in and fade-out effects when switching screens in AFK mode.
Possible to set the time from when the car stops to when it enters AFK mode. (Default is 5 seconds)
Modified so that AFK mode does not operate while the main menu is displayed.

ver1.5
Add AFK mode that automatically switches angles when the car stops and more than 5 seconds have elapsed.
Modified so that when the camera is turned off, it returns to the viewpoint before it was turned on.

(About AFK Mode)
When AFK Mode Enable is checked, even when the camera is OFF, if the vehicle speed is 0 kmh and 5 seconds elapses,
The camera will automatically turn on and the angle will change.
If you continue driving, the camera will turn off and the viewpoint will return to its original state.
The SAVE function in Camera Seeting can also be used to save the on/off status of the AFK mode.

If you can't control the camera, turn off the AFK mode and press the SAVE button in the Camera Setting to return to the original setting.
(If AFK mode is on by default, you will not be able to control the camera on/off manually.)

ver 1.4.2
When outputting video to OBS plugin, the driver's viewpoint moves to a predetermined position each time the angle is switched.
The driver's viewpoint is not changed even if the OBS plugin Output checkbox is turned on. (The driver's head is forced to be displayed.)
As a result, if the driver's head is in the way, use eye position offset to move the viewpoint.

ver 1.4.1
Corrected AI line check logic in static position view. (Mainly for two-way traffic)

ver 1.4
Support video output to OBS plug-in. (Test implementation)
If there is a line for AI on the track, the static position view will use the information of the line (if there is no line for AI, it will work as before).

ver 1.3.1
Adjustment made so that the interior of a car is not visible when the camera is close to the car in road surface view.

ver 1.3.0
Added random position view. The camera position is randomly determined and displayed in a fixed position.
Randomized the starting position of bird view.

Added dynamicView to preset settings. If you want to return to the old preset, select the "Preset Setting" tab, and from "LOAD", select "sample_preset.json".
Select "dynamicView.json" for a sample preset that utilizes random position view.

ver 1.2.0
Camera Hight Offset setting was added to the Camera Setting tab.
This function allows the height of the default camera to be adjusted when the camera encroaches into the road due to track.
The height can be adjusted within a range of ±3m. If there is no problem, 0 is recommended.