Hi All,
Well as you might have seen, I have broken the Seat, not sure where, but if I broke it, I can fix it. Hopefully you are all enjoying the Mini, good fun, now for some good news.
LODS LODS EVERYWHERE...I have seemed to have found a LOD expert, so with this in mind, I halting on everything else, and re-visiting the Ginetta (already fixed the ride height problem with the GT4), so the Ginetta, might, finally have proper LODS.
If this works, then it will enable me to make changes to the Audi, the Seat, and improve the Mini.
I cannot stress enough, I am really excited by this, as this has always been a problem, and I hate problems that are man made.....
So watch this space....or the RD Downloads
Regards
Shaun
Nice Dates mate PMSL !!!!
Yeah your lods are getting out of hand mate.
Don't panic, don't need to, I know what the problem isRolllllllll that Seat back to a previous data folder. (Don't ask me how many times I've had to do that, it'll take days to count.)
It's ok you can sleep now..nothing coming out tonight....LOLAre you an owl.
I have school tommorow and I need to sleep.
Lucky youIt's ok you can sleep now..nothing coming out tonight....LOL
Just testing a couple of bits, and its only 22:42pm in the UK
Shaun
Yeah exactly, this changes the overall appearence of the exhaust. Does this material use a txMaps slot (cannot see what material it uses)? If so, I would suggest to revert the settings and change the txMaps texture to get less reflections, less specular, etc.What I've have done is changing this parameters (3DsimED):
Yeah exactly, this changes the overall appearence of the exhaust. Does this material use a txMaps slot (cannot see what material it uses)? If so, I would suggest to revert the settings and change the txMaps texture to get less reflections, less specular, etc.
That is, ofcourse, if the exhaust is properly UV mapped.
For sure it's less of an "in your face" thing now already
Good luck and cu soonHi All,
Some sad news. I have a HD failure, well I say failure, it still boots (hence why I am still here) but the bearings are shot so I am doing MASS backups now (Got the cars I have worked on ) so no major panic
Luckily, just like a magician, I have a spare, but as you can imagine, lots to backup, so excuse me if I disappear or don't answer for a little while
Shaun
So I've to fix it just with this textures:
http://www.mediafire.com/file/s4dfqhs29x52b4a/Textures.rar
The mapping of the exhaust is a little bit strange. So I think its possible to fix the "radioactive" shine of it but its impossible to add heat scorching / soot texture.
Just with the KN5 files?You do know that you can just remap the exhaust really easily? Does not even require knowledge of mapping, standard remapping will do (although it won't give the best result, it will solve the strange mapping issue).
While you've a break and chill the whole timeHay Guess who's back LOL...Still reloading all the stuff, AC is going to take a while, but HD in the bin, new one in and just loading drivers, and yes, I got all important stuff off
Won't be testing / releasing anything tonight, but I am here
Shaun