TX Serve Base + G27 Pedals = Pedal Deadzone (10-15%)

dnl0319 · Nov 2, 2015

I got a TX Servo Base and the G27 Pedals. The Pedals are connected to the Base with an Adapter.

But i got deadzones an every Pedal, about 10-15%.

Does anybody have an Idea do i fix that?

Edit: I recently mounted a spring Mod from GTEYE, could that maybe the reason?

Thanks if someone can help me!

Emery · Nov 2, 2015

Have you recalibrated the pedals?

dnl0319 · Nov 2, 2015

I did in every Game, AC, pCars, Raceroom but no difference? Or can i recalibrate the Pedals with a Programm?

Anthony Hodges · Nov 3, 2015

You could get the Leo Bodnar generic pedals adapter..
Link

dnl0319 · Nov 3, 2015

The reason is the Adapter? cause i plugged it directly in to the base...

Anthony Hodges · Nov 3, 2015

That adapter i linked does not go into the base. that will make your g27 pedals standalone. You would plug that adapter into the usb at the back of your PC.

dnl0319 · Nov 3, 2015

Yeah i saw that. But then i have to buy another adapter...

Anthony Hodges · Nov 3, 2015

I dont have the TX base so I cant really help you there. But if you cant find a solution you could look at that. I'm using the linked adapter and it works well.

dnl0319 · Nov 3, 2015

Okay thank u, i will try it with the linked Adapter!

Jari Vinnari · Nov 3, 2015

Im using Richmotecs Thrustmaster wheel to Logitech pedals adapter. Sometimes I have deadzone problem if I have pressed pedals during the power up /calibration routine of the wheel.

You need to recalibrate the pedals by using the Thrustmaster´s control panel.
Its important that you power up your wheel, let the wheel calibrate, start the Thrustmaster Control Panel and only then press the pedals all the way down.

dnl0319 · Nov 3, 2015

I do this. I power up my pc and don't touch the Pedals, the wheel calibrates and i start a game... should i recalibrate the pedals every time i power up the pc and wheel before i start any game?

Jari Vinnari · Nov 3, 2015

First you need calibrate the pedals in Thrustmaster Control Panel.
Check this guide-> http://ts.thrustmaster.com/faqs/eng/thr_eng_00144.pdf

You start the Thrustmaster Control Panel and only the you press the pedals.
After that you can go to game and calibrate the wheel there too.

dnl0319 · Nov 3, 2015

Okay so i start the preferences on control panel and press every pedal. And then it's calibrated? So I don't have to do that all the time I powered up the pc and wheel?