Timing gate issue (rFactor)

I am having trouble with a tracks timing gates. The problem is, its only gives a lap time on 2 laps not on each lap.
I have changed the gates around and used different settings to place them and still only times every 2 laps?
Can somebody suggest where I'm going wrong. I've not had this problem before.

:coffee2:

:noidea:

:doh:
 
time gates , xfinish needs to be over the start/finish line and inside the pits, if not they will miss reported the laps.like your getting,reports every two laps.also check the pit in/out arent inside the main race track position.
 
To make a lap count, you need to pass through xfinish (starts the timer) then checkpoint1 and checkpoint2 and back past xfinish ( stops the timer for that lap then restarts it for the next lap).
Is it a circuit or an A to B? If it's an A to B you need an extra set of xfinish and both checkpoints, ie,
|garage| _ |cp1001| _ |cp2002| _ (startline)+|xfinish1001| _ |cp1| _ |cp2| _ | xfinish|
 
Thanks Banger, mianiak and lordpantsington. :peace:

Mianiak, it was the checkpoints. I had checkpoint 2 before checkpoint 1. Now it works perfectly.

:thanks:

I should of mentioned it was a loop track too BTW.

Should be done in the next 24h. I will post it here on RD.
Cheers guys.
 

Latest News

What would make you race in our Club events

  • Special events

    Votes: 44 27.2%
  • More leagues

    Votes: 32 19.8%
  • Prizes

    Votes: 30 18.5%
  • Trophies

    Votes: 17 10.5%
  • Forum trophies

    Votes: 11 6.8%
  • Livestreams

    Votes: 27 16.7%
  • Easier access

    Votes: 89 54.9%
  • Other? post your reason

    Votes: 27 16.7%
Back
Top