OSW wheel oscillation issue

[Angeltheartist]

When car is in pit garage or driving on straights i get uncontrollable left/right oscillation . Please help . Thank you.

 

[=Fieldzy=]

check that you have this set: "Steering effects strength":-10000 must be - not+

 

[Christian.ca]

When car is in pit garage or driving on straights i get uncontrollable left/right oscillation . Please help . Thank you.

Make sure you are using the OSW_Simucube controller profile in rF2 as a base. It should eliminate the possibility to have FFB inverted I think and have a lower "Steering torque zero-speed mult" to help with pit garage oscillation.

You can control these oscillations by adding a mix of damping, inertia and friction in your profiles (configuration tool - filters section), I find that I need less with s397 cars and a little more with some others (like Reiza pack). So I made 2 profiles and switch when needed.

You obviously don't want to add too much of these filters, and you probably won't cure all the hand-off oscillation while the car is moving, but it should not be noticable when driving.

 

[Angeltheartist]

Thank you for the response .

 

[Denis Betty]

Did you fix the problem?