Fanatec CSW V2.5 Hub Height

[Asterix]

Need a favour - can someone with a V2.5 measure the height of the centre of the hub above the bottom of the unit - or from the top, I know the unit is 152mm.

Many thanks in advance.

 

[Asterix]

I'm guessing around 60mm-70mm given that it looks below centre height-wise.

 

[Andydigital]

I've got a Club Sport V1 Base and to the centre of the shaft its 70mm from the base. I presume the 2 and 2.5 are the same case, it wouldn't make much sense wasting money retooling for things like that.

 

[Asterix]

Brill - Thanks - much appreciated.

 

[RasmusP]

Can you grab a picture and show me what you need? Maybe via snipping tool or something similar.
I have a v2.5 and can happily measure whatever you want

 

[Asterix]

Centre of the hub mate - the roundy bit in the middle that the wheel attaches too.

 

[RasmusP]

Centre of the hub mate - the roundy bit in the middle that the wheel attaches too.

Ah, middle of the quick release from top and bottom of the base. Got it!
Gonna do it in about 60 minutes

 

[RasmusP]

This should be everything you need. It's not the absolute height, it's in the layer of the front plate. Mine is angled on a wheelstand so I couldn't really measure the heights.
I added the 20° tilt due to the attachement adapter. I'm sure you can figure out the absolute heights from there

 

[Asterix]

Great, so the same as the V1 as Andy says.

Thanks guys.