Hey all ,
I started sim racing around 16 months ago , it was after 6 odd months that i started getting some trouble from my CSP's , that i decided to explore the prospect of building something of my own . So with the help of a friend of mine (he has electronics knowledge, i have none ) i set about what you see below ...
So here we go ....
I have to say a big thankyou before anything else to Phil Berry for all his help and words of encouragement !
Like any project its the slow and painful process of acquiring bit on a parts by parts basis .....
So this is what i have managed to receive thus far :
Magnets for the Hall Sensors
These being the Hall Sensors ( tiny little things)
Pressure transducer for the clutch
Measpec transducer for the brake
Pull slaves
I have 2 types of valve springs that i will be using on the pull slave , depending on how hard or soft you want the effect to be
The pedal assembly (pièce de résistance in my opinion)
Master for the clutch pedal
Masters for the brakes
Load cell amp (many thanks to derek speare)
Thats all i have for now , so as i accumulate more gear and finally begin the construction i will post more pics ...
I started sim racing around 16 months ago , it was after 6 odd months that i started getting some trouble from my CSP's , that i decided to explore the prospect of building something of my own . So with the help of a friend of mine (he has electronics knowledge, i have none ) i set about what you see below ...
So here we go ....
I have to say a big thankyou before anything else to Phil Berry for all his help and words of encouragement !
Like any project its the slow and painful process of acquiring bit on a parts by parts basis .....
So this is what i have managed to receive thus far :
Magnets for the Hall Sensors
These being the Hall Sensors ( tiny little things)
Pressure transducer for the clutch
Measpec transducer for the brake
Pull slaves
I have 2 types of valve springs that i will be using on the pull slave , depending on how hard or soft you want the effect to be
The pedal assembly (pièce de résistance in my opinion)
Master for the clutch pedal
Masters for the brakes
Load cell amp (many thanks to derek speare)
Thats all i have for now , so as i accumulate more gear and finally begin the construction i will post more pics ...