ECU tuner 1.12

You can now download older version (1.08) of ECU TUNER PRO on Patreon with a 7-day free trial.
Patreon

-Fuel pressure on rail simulation -Fuel pump simulation -you can choose between stock fuel pump and stage 1(better LPH), but you need to tune it
-Fuel pump feature will be also avalaible in next FREE version

Hi, guys! I was preparing a video on how to tune with a fuel pressure regulator, and I realized that the duty cycle formula for the FPR was wrong. As a result, the extra FPR tuning was not fully available. I apologize for the mistake. Here is the fixed version.

-new car Nissan GTR (please check ECU Tuner cars link)
-You can now adjust your fuel pressure with adjustable fuel pressure regulator from 2-4bar(30-60psi)
-base fuel pressure is about 2,3bar(33psi), so you can gain 34% fuel on 4bar fuel pressure
-with FPR you can squeeze out more from injectors
-Injectors parameters were changed for all cars
-other small changes

-new car Nissan GTR(will be avalaible also in next FREE version)
-You can now adjust your fuel pressure with adjustable fuel pressure regulator from 2-4bar(30-60psi) (will be avalaible also in FREE version)
-base fuel pressure is about 2,3bar(33psi), so you can gain 34% fuel on 4bar fuel pressure
-with FPR you can squeeze out more from injectors

Old cars were not updated, just download Audi R8

Hey, this should give You far better performance than v1.07 + I made some minor changes

-New car Toyota AE86

-added new HELP feature

-updated sfx

-better optimized

-minor changes

If you want to support my work, or download PRO version with much more features please visit my Patreon

-Please update all ECU cars

If you want to support my work, or download PRO version with much more features please visit my Patreon

-you can choose NA(naturally aspirated) or 7psi/0,5bar wastegate spring
-Preset 1 is stock car
-Preset 2 is 0,7bar tune with bigger injectors
-Preset 3 is naturally aspirated tune on stock injectors
-small fixes for other cars

If you want to support my work, or download PRO version with much more features please visit my Patreon

-from now You can save and load all data(maps, fuelcut, rpm limiter, wastegate spring and injectors) to 3 presets(in data\maps\ ) for every car
-app is fully disabled when You play with non ECU car = better performance

- Cars were not updated, so You dont need to download them again

-working on 2 boost activated exhaust valves option (fully opened on 0,5bar and 1bar boost)

-with Coolant system and electric fans control

Avalaible to download only on Patreon

Coolant system simulation
-engine coolant circuit simulation with 80degree Celsius thermostat(CLT)
-radiator coolant circuit simulation
-2 electric fans control separately
(start temperature from 85° -120° )
-overheating start over 110°
-coolant capacity is 10l, will be reduced progresively if engine is overheating(low coolant level warning light was added-yellow if coolant capacity is below 7l and red if its below 4l)
-refill button can be activated only if yellow or red "low coolant capacity" light is on.
-if your coolant capacity is low your fans will be not efficient enough to cool down engine
-there is engine cut on 150° temp
-to activate refill button, speed need to be 0km/h and it take 1liter/sec to refill circuit
-new status bar with ecu light, fan1, fan2 lights and low coolant level warning light
-coolant temperature gauge on dashboard works with ecu tuner now
-interior overheating light ligt up from 110°
-fan1 & fan2 sound , boiling water sound
-water fumes from hood are progresively visible from 110° , also reacts to active fans

All these features will be avalaible in next PRO version update

-Audi Quattro Sport incorrect boost building was corrected based on real dyno graph -You can reach ∼1bar boost with stock injectors, stock turbo is capable for ∼2bar

-PRO version with more features only on PATREON
-Update your FREE ECU cars

You can uninstall vJoy and UCR now. You can play on keyboard, gamepad or wheel, everything should work fine without remapping throttle&brake.
Also dont forget to update ECU cars

-You can uninstall vJoy . From now UCR is used only for rolling antilag, everything else was implemented in app = app is not pushing buttons on your keyboard anymore
-exhaust smoke and flames were added, based on afr, timing, boost and rpm
-ecu error codes are also blinking on dashboard

Working on:
-Exhaust gas temperature sensor simulation and failsafe options
-Coolant temperature sensor simulation and FANs control options

Pro versionV1.03 is already avalaible for download on PATREON
Free version UPDATE will be avalaible soon