I've been trying to set up XD for an hour or so but it still doesn't work. Installed it as usual and started the game, quit and changed the positions (it wasn't visible with default positions either). I didn't paste the Race07 config into the GTR2 folder, to be clear on that - all I did copy were the positions of the gadgets.
That's all I'm getting.
That's all I'm getting.
; --------------------------------------------------------------------
; XD v2.1.12
; --------------------------------------------------------------------
; by Yako (yako@vitumo.de)
; www.vitumo.de
; --------------------------------------------------------------------
; 1 = Enabled (default), 0 = Disabled
Enabled=1
; 0 = Show all info in one small overlay window (Use on/off key to cycle through views)
; 1 = Set to 1 if you are using the original In-Game-HUD (default)
; 2 = Use this if you are not going to use the In-Game-HUD
Mode=1
; 0 = No transparency at all
; 1 = Semi transparent HUD (default)
; 2 = Full transparent
Transparency=1
; MotecHud visibility
; 0 = Hidden
; 1 = Visible
ShowMotec=1
; Standings-table visibility
; 0 = Hidden
; 1 = Visible
ShowStandings=1
; SessionInfo visibility
; 0 = Hidden
; 1 = Visible
ShowSessionInfo=1
; Delta-time calculation to your best lap and last lap
; 0 = Disabled (default)
; 1 = To best lap only
; 2 = To last lap only
; 3 = Combine 1 and 2
ShowDeltaTime=3
; MoTeC HUD postion:
; Default: X = auto, Y = auto
MotecPosX=1685
MotecPosY=822
; Standings HUD postion:
; Default: X = auto, Y = auto
StandingsPosX=1506
StandingsPosY=1
; Session-Info HUD postion:
; Default: X = auto, Y = auto
SessionPosX=1
SessionPosY=1005
; 0 = Cycle from liters last lap to prediction every 10 secs (default)
; 1 = Show only liters last lap & average
; 2 = Show only estimated laps based on last lap and average
; option is valid only when general HUD-Mode is not 0
FuelMode=0
; Standings-Mode in race session
; 0 = Gaps are updated only 3 times during a lap
; 1 = Show realtime gaps refreshing every second (default)
StandingsMode=1
; How many players to display in the standings? (Default: 13)
StandingsPlayersVisible=7
; 0 = Show full player names
; 1 = Show short names like the name indicator floating over the cars when on track (default)
StandingsPlayerNames=1
; Highlight player with fastest lap in race (Default: disabled)
HilightPlayerWithFastestLap=0
; 0 = Imperial
; 1 = Metric (default)
MeasurementUnits=1
; Refresh rate (in ms) default: 250
RefreshRate=250
; MoTeC HUD Scale
; Note: Only the MoTeC-Display can manually be scaled.
; Everything else is scaled automatically according to your screen resolution
; If the MoTeC display is set to tab-mode, the other info is also scaled (Session-Info/Standings)
; Value given in percentage
; 100(%) Scale = 1024x768 = 1:1 = No Transformation
; 0 = Disable scaling
Scale=100
; Key to switch on/off
; Possible keyboard layouts:
; For DE: http://www.vitumo.de/files/XD/keyStroke.de.txt
; For EN: http://www.vitumo.de/files/XD/keyStroke.en.txt
; Default: 220 = Circumflex Symbol (Next to the '1' key on main-field)
; For English Keyboard layout please insert 192 here (the '`' key), or the key is mapped to the backslash-key
ToggleKey=220
; Pitstop key
; You can define a custom key to bring up the pit-menu
; Default: 0
; If this is 0, you have to use the "ToggleKey" to get access to the menu
PitstopKey=0
; Show tyre pressure
; 0 = Disabled
; 1 = Enabled (default)
TyrePressure=1
; Show tyre wear also in numbers
; 0 = Disabled
; 1 = Enabled (default)
ShowTyreWearInNumbers=1
; Tyre color behaviour
; 0 = Triple color, of each tyre segment (in, mid, out)
; 1 = Single color, computed from average temperature across the tyre (default)
SingleTyreColor=1
; Show MoTeC-Data from the run before for x seconds
; 0 = Disabled (default)
MotecHistory=0
; Data-Logging
; Logged data is stored as tab-delimited .CSV file per session.
; If the specified directory doesn't exist it will be created
; Interval given in seconds, default: 60
; Change value to -1 if data should be logged once per lap
LoggingOutputDirectory=
LoggingInterval=60
LogTrackTemperature=0
LogTyreWear=0
LogTyreTemperature=0
LogTyrePressure=0