• "Mwoah" - Kimi Räikkönen
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dear Guest. Follow RaceDepartment on Twitter, Facebook, Instagram, Twitch, Steam and YouTube.

MoTeC displaying wrong values

Discussion in 'Assetto Corsa' started by MarceloCastro, Jul 14, 2017.

  1. MarceloCastro

    MarceloCastro

    Messages:
    1
    Ratings:
    +0
    So I've setup the ACTI telemetry interface, but it seems that MoTeC is displaying the wrong values. I've tested it with the Lotus T125 Exos S1 @ Mugello, but the ride height reading appears to be wrong. The floor is hitting the ground, but on MoTeC it shows that it still is around 30mm clear.

    Any help?
     
  2. PhilS13

    PhilS13
    Premium

    Messages:
    213
    Ratings:
    +137
    Ride height in Motec is longitudinally at the axles and laterally at the car centerline so you will almost never get the relation : 0mm in MoTec = car scraping.

    Doesn't mean the car is right, it can still be off but what you described is normal.
     
    • Like Like x 1