What is required to get correct values for Steered Angle from this plugin? The name shows up in the MoTeC channel list but is always 0? Steered Angle is not a math channel and its name clearly seen in the plugin output file. Its interesting that Steering deg characters are there also but the does not show up in MoTec as a channel. Any help would be greatly appreciated. I have a feeling this is just a bug in the plugin
and there is not other channel(s) that you can create a math for it.
This issue screws the result of the Math equation for Oversteer since that math equation uses Steered Angle as an input. One can create the math for Steered Angle from the Steering Wheel Angle Pct channel that I used when I had
Data Acquisition Plugin 1.32 by DanZ running,
but that plugin's output would only work with older versions of MoTeC.
So know GSCE will put steering information out.
I want to use a newer version of plugin by Kinsman what will work with the newer MoTeC that allows integration resets after each lap.
Sidebar. Also so get Oversteer I know I have to enter a math for the Vehicle Wheelbase which is easy to add based on which car you are using.
Background of plugin and Motec installation:
Installed this plugin for GSCE to get telemetry:
http://www.mediafire.com/download/fz5yma3ne49c0fp/Chris Kinsman's MoTeC Telemetry Plugin V1.4.exe
Installed this version of MoTeC (allows per lap integration):
http://www.motec.com/filedownload.php/mi2_pro_1.0.21.0030.exe?docid=2409
Thanks ....
and there is not other channel(s) that you can create a math for it.
This issue screws the result of the Math equation for Oversteer since that math equation uses Steered Angle as an input. One can create the math for Steered Angle from the Steering Wheel Angle Pct channel that I used when I had
Data Acquisition Plugin 1.32 by DanZ running,
but that plugin's output would only work with older versions of MoTeC.
So know GSCE will put steering information out.
I want to use a newer version of plugin by Kinsman what will work with the newer MoTeC that allows integration resets after each lap.
Sidebar. Also so get Oversteer I know I have to enter a math for the Vehicle Wheelbase which is easy to add based on which car you are using.
Background of plugin and Motec installation:
Installed this plugin for GSCE to get telemetry:
http://www.mediafire.com/download/fz5yma3ne49c0fp/Chris Kinsman's MoTeC Telemetry Plugin V1.4.exe
Installed this version of MoTeC (allows per lap integration):
http://www.motec.com/filedownload.php/mi2_pro_1.0.21.0030.exe?docid=2409
Thanks ....
Last edited: