diy pedal

[fabien25]

hello iam fab from switzerland thank you at all the menber for yours works and answer .
for start i build a pedal style cst f1 but for i finish it i want to know a thing please
how the load cell is fixed and work ,he has drill an hole and threaded i think but the hole is drill through ?
is possible to make this system too

do you think the result will be the same ? great thank
cordially
when is finish i post some foto ok

 

[fabien25]

nobody???

 

[Knut Omdal Tveito]

@fabien25
Have a look here
http://amosalipedals.blogspot.no/2008/09/actual-load-cell.html

The right-hand end of the load cell in these photos is bolted to the pedal platform by two metric bolts that go through holes from the bottom side and into the load cell, which is tapped with metric threads from the factory

The aluminum beam already includes threaded holes so it is attached using the factory threads. The holes used to attach to the base is drilled through, so I guess the holes at the other end is also through.

Which loadcell do you plan to use with your custom pedals?

 

[fabien25]

hello knut thank i have a same load cell that todd is 30 kg

 

[fabien25]

i would like to do a same on picture 1 but i think he had drill and treads

 

[fixer]

Elane 60kg load cell I bought separately is identical to one Todd uses in F1 pedals, including all 5 drill-thru mounting holes.

 

[Charles Huffstetler]

the bolted black metal piece on load cell is slotted so the adjustment bolt will slide back and forth and change the lever point...I used a 60kg load cell