Using Wheel damper?

[Msportdan]

Has anyone tried this?I know its a forsaken rule to use damper in sims. But ive been messing wiht about 30% damper (json resistance coefficent) (100% profiler) and it feels much more like a real car it takes away the springey feel to the wheel, and also makes it feel like your on rubber. Also with a min force about 3% I still feel details and not clip.

Has anyone tried this?

 

[Robin]

Ok, well then this whole discussion has been at 50% input.
Still, rF2 feels a lot better with the Dampening slider set at 0%.
iRacing doesn't seem to care (but its ingame Damper is set at 0% too in my case).
Assetto Corsa is undrivable with slider at 0%.
And R3E works well with 100% as well as 0%, however it does alter the feel of the FFB in game. Just not as pronounced.

These are my testing results and if anything, the results just add to the confusion.

 

[Emery]

So I think I've figured out the missing elements for IndyCar and Formula Renault. Both need higher car-specific multipliers (0.7-0.75 on my CSWv2) due to different FFB scaling and turning up the Formula Renault caster gave it the extra center feel that wasn't there.

 

[Robin]

Well as long as you can't check what your Dampening value is for the driver you info can be anything from great to not working for my config.

 

[Emery]

Robin - Are you using Win8/10? Where are you finding a control panel slider for the CSWv2?

 

[Robin]

I am using Win 10.
Latest Fanatec drivers.

Go into your Game Controllers menu in Windows, select the CSW and press Properties. This will open the Fanatec control panel.
You can also update the firmware on the wheel from here.

 

[Msportdan]

emery I used the caster to fix the old indy car, but it seems much better (don't need caster fix) with the latest update with the car?

 

[Emery]

Go into your Game Controllers menu in Windows, select the CSW and press Properties. This will open the Fanatec control panel.

We're the same, except I never get a Fanatec control panel. Guess I'll reinstall the driver at some point.

 

[Emery]

emery I used the caster to fix the old indy car, but it seems much better (don't need caster fix) with the latest update with the car?

I needed no caster change for current IndyCar. Only the FR. Can't remember old IndyCar.