My Yoke is Finished

[Antony Snook]

This is my wheel yoke for the SWR-S1 wheel. I found a thread on the back and fastened a bolt into it. The bold is on a L braket on a pice of dowling and straped to a G clamp with plastic ties. Another L braket holds it on vertical axis or it wobbles up and down. Now it goes onto the table and dose not rattle it like the usual wheel rigs. The bolds alittle wobbly it cant be to tight but it works.View attachment 32741

 

[Gerben Kelly]

Picture isn't working!