• Goodbye Dan Gurney, and thanks for the memories...
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Follow RaceDepartment also on Twitter, Facebook, Instagram, Twitch, Steam and / or YouTube.

Kerbs problem

Discussion in 'Racer Problems & Fixes' started by berzingue, Aug 30, 2015.

  1. berzingue



    I've created a racing track with kerbs.
    Asphalt and Kerbs have "track collision" flag.

    I've made a lap.
    Majority of Kerbs are working, but some are not. There is no vibrations, no collision on it.

    I've tried all sorts of things with TrackEd, with 3dsmax...no success for now...

    Is somebody already have this problem ?

  2. Mr Whippy

    Mr Whippy

    The first thing that could be a problem is geometry based.

    The main thing to check is debug screen readout (ctrl 1 I think, maybe 2), and it shows each wheel and the surface it's detecting.

    It's probably worthwhile to drive the course and check which kerbs are being detected and the materials changing in the readout and make sure they're set properly etc.

    Perhaps some kerbs have a different texture name to others, and that material definition hasn't been set in the special.ini material definitions for kerbs?!

    There are also other things it could be but that is the most likely for now from your description.