1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PC Help: G27 Pedal Configuration

Discussion in 'Assetto Corsa' started by Kristian Maynes, Feb 14, 2015.

  1. I was driving the BMW E30 and I want to try doing the Heel Toe method, then this problem started. I can not press Accelerator and Brake pedal at the same time on my G27 playing Assetto Corsa. When i press my brake pedals, it will detect my brakes. Then when i blip my accelerator it will just release my brakes like i wasnt pressing the brakes and the accelerator. I saw that the Accelerator is just inverted Brake pedal on Assetto corsa settings.
    Now, how can i configure this on the game. Take a look on my wheel properties, I can press 3 pedals simultaneously but not in Assetto Corsa.
    2015-02-14_235719.png 2015-02-15_000312.png

    Attached Files:

  2. Looks like you need to redo your axis assignments since your brake and throttle are both linked to the same axis.
  3. change it in game? I already did that. I used the wizard, manually entered the pedals and put the G27 with H shifter preset in game.
  4. Dragos Haba

    Dragos Haba
    #9 | Roaring Pipes Maniacs Premium Member

    Ok don't use the wizard, reassign all the steering, throttle brake, and clutch axis. MAKE sure you do not have the COMBINED box checked, uncheck that before you reassign.. see what happens.

    Also, the only axis that should be inverted for the pedals is the Clutch. You should not be having any problems.
    • Beer Beer x 1
  5. I never used the wizard or manual assignment. I just loaded the g27+shifter preset and everything was set accordingly. Then I mapped the secondary buttons and lowered/turned off some ffb settings like road kerbs slip, since even at 0 they give force feedback. Then adjusted the ffb strength in car setup for so it doesn't clip the ffb, which is shown in the 4th bar of the pedals app, as long as stays in the grey area on corners and such and doesn't turn red, then is fine.
  6. Dragos Haba Thanks, I created a new profile on my Logitech Profiler then remove all key/button assignment on AC settings and it worked.

    If anyone needs a G27 settings, here it is. Just put it in My Documents\Assetto Corsa\cfg\controllers\savedsetups

    Attached Files: