1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Caterham Seven Mod

Discussion in 'rFactor' started by Adrian Britton, Jun 28, 2012.

  1. Adrian Britton

    Adrian Britton
    @ Simberia @Simberia

    Hi
    Can anyone help me to get the gear ratios and engine files right for this mod.

    I have looked on the caterham web site and the 5 speed ratio is....
    Transmission5 Speed
    1st: 3.65:1
    2nd: 1.97:1
    3rd: 1.37:1
    4th: 1.00:1
    5th: 0.82:1
    Final drive: 3.92:1
    The rfactor 5 speed ratio is....
    [GEAR_RATIOS]
    ratio=(100, 365) // 3.67
    ratio=(100, 365) // 3.65
    ratio=(100, 197) // 1.97
    ratio=(100, 137) // 1.37
    ratio=(100, 100) // 1.00
    ratio=(100, 82) // 0.82
    [FINAL_DRIVE]
    bevel=(30, 30) // 1.00
    ratio=(100, 392) // 3.92

    Now, I have tried to change them around to be like the real gear ratio, but the torque does not seem to be there, I only end up going as high as 3rd. Its enfuriating me, as the sim ratios are driving me crazy.

    Its the same with the 6 speed...
    TransmissionClose Ratio 6 Speed
    1st: 2.69:1
    2nd: 2.01:1
    3rd: 1.59:1
    4th: 1.32:1
    5th: 1.13:1
    6th 1.00:1
    Final Drive: 3.62:1

    Sequential 6 Speed
    1st: 2.4:1
    2nd: 1.84:1
    3rd: 1.482:1
    4th: 1.26:1
    5th: 1.104:1
    6th 1:1
    The rfactor 6 speed ratio is....
    [GEAR_RATIOS]
    ratio=(100, 296) // 2.96
    ratio=(100, 269) // 2.69
    ratio=(100, 201) // 2.01
    ratio=(100, 159) // 1.59
    ratio=(100, 132) // 1.32
    ratio=(100, 113) // 1.13
    ratio=(100, 100) // 1.00
    [FINAL_DRIVE]
    bevel=(30, 30) // 1.00
    ratio=(100, 362) // 3.62
     
  2. Adrian Britton

    Adrian Britton
    @ Simberia @Simberia

    Sorry I should just add that I use it with "gated shiter" upgrade and with all assistants off (no auto clutch)


    (I got is sorted now) thread not needed anymore :thumbsup: