• "Bwoah." - Generic Kimi Quotes.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. If you have any questions, please don't hesitate to ask. There's no such thing as a stupid question.

Can't get rid of bumps

Discussion in 'Bob's Track Builder' started by Bela Valko, Nov 18, 2015.

  1. Bela Valko

    Bela Valko

    Messages:
    182
    Ratings:
    +81
    Hi guys!

    I'm making a track with BTB, I'm using GE and 3DRB for the data. My problem is there are some bumps on the track I can't smooth out. Btw this is not the first time, I had the same problem with other tracks too.
    So obviously I tried to smooth the control points and later I tried to move the CPs and nodes manually which is a mess, trial and error and costs hours and it wasn't a success either.
    On the first picture around the second selected node/cps there is a pot hole.
    On the second picture there are 3 (three) bumps around that bridge on the background picture.
    What can I do?
    btb1.jpg btb2.jpg
     
  2. Emery

    Emery

    Messages:
    891
    Ratings:
    +216
  3. Bela Valko

    Bela Valko

    Messages:
    182
    Ratings:
    +81
  4. Erwin Greven

    Erwin Greven
    Premium

    Messages:
    1,508
    Ratings:
    +256
    there are a few factors that create bumps:
    • in cross section > randomness
    • track nodes close to each other
    In the second option: to iron out bumps you can choose smooth selected nodes > by height or flatten, but it will not affect the control points. With smooth control points it will.