Cars Can someone update the RSS Lanzo 10?

[Wodz30]

Wondering if anyone has the ability to update some of the controls within this car. It is a very high level model from RSS. Maybe you can forward this to someone? GTPlanet? idk

Steering column
Left and Right turn signals do not blink on steering wheel (works irl? idk)
TC and ABS buttons do not turn with input (i know this is possible)

Center control stack
Reverse does not light up when reverse is engaged
High beam light does not come on when high beams engaged
Wiper speed does not change with wiper speed

I ask because these do function in ACC and using these in VR is pretty amazing. So if they can function in ACC one would think they can work on AC but it requires someone mapping these in the ext_config, which is way, way beyond me. I have seen virtually all of these functions work in other cars in AC (amazing). I spend more time playing with fun buttons in cars than actually racing.


This is a great car that many love and with VR becoming more popular these might be tiny adjustments that others would love to have.

 

[Sergio Loro]

write to RSS, for sure they will take note of your suggestion.

 

[Deleted member 223075]

write to RSS, for sure they will take note of your suggestion.

Or you can do it by yourself editing ext_config.ini without waiting...

USE_HIGHBEAM_BY_DEFAULT=1 ; Use high beams mode by default; 1 or 0
USE_AUTOMATIC_TURNING_LIGHTS=1 ; Switch turning lights on and off automatically; 1 or 0
TURNING_LIGHTS_IN_PITLANE_ONLY=1 ; No turn signals outside of pits; 1 or 0; only with USE_AUTOMATIC_TURNING_LIGHTS
TURNING_LIGHTS_RPM_THRESHOLD=0 ; Turn signals RPM thr.; from 0 RPM to 5000, round to 500; only with USE_AUTOMATIC_TURNING_LIGHTS
TURNING_LIGHTS_SPEED_THRESHOLD=0 ; Turn signals speed thr.; from 0 km/h to 100, round to 10; only with USE_AUTOMATIC_TURNING_LIGHTS
TURNING_LIGHTS_STEER_THRESHOLD=90 ; Turn signals steering thr.; from 40° to 180; only with USE_AUTOMATIC_TURNING_LIGHTS

[LIGHT_REVERSE]
COLOR=6, 6, 6
LAG=0.5
NAME=reverse
OFF_COLOR=0,0,0

[LIGHT_REVERSE_...]
AFFECTS_TRACK=1
COLOR=1, 1, 1, 5
DIFFUSE_CONCENTRATION=0.88
DIRECTION=0, 0, -1
EXTERIOR_ONLY=0
FADE_AT=120
FADE_SMOOTH=30
INTERIOR_ONLY=0
MIRROR=0
OFF_FADE_MULT=0.3
OFF_MIRROR=0
OFF_MULT=0.1
OFF_POSITION=0, 0.757851, -1.84191
OFF_RANGE_MULT=0.5
POSITION=0, 0.757851, -1.84191
RANGE=5
RANGE_GRADIENT_OFFSET=0.5
SPECULAR_MULT=1
SPOT=175
SPOT_EDGE=0.12, 0.12, 0.12
SPOT_EDGE_SHARPNESS=10
SPOT_SHARPNESS=0.4

[EMISSIVE_REVERSE_...]

etc...

Load AC, and in race open your ext_config and play with it to see what it change and what it affects

EDIT : ok took me 10min to do it and 30 to find wich after meshe insert it.

Just do the same for other buttons/lights

 

[Wodz30]

Absolutely incredible! None of that worked for me and I absolutely do not know how to do any of that, way above my head. Can you copy/paste your ext_config here so I can use that? Then I can "figure out" how to get other central panel lights to function.


Thanks so much!