1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
Like RaceDepartment on Facebook.

How To Install A Mod

Discussion in 'F1 2013 Mods' started by Graham Laing, Apr 1, 2014.

Thread Status:
Not open for further replies.
  1. Graham Laing

    Graham Laing
    ...... mostly harmless Staff

    moddingheader.png

    Downloading and Unpacking a Mod

    • Visit our F1 2013 resource centre (downloads) by following this link
    • Choose the type of mod that you want from the categories list
    • Pick a mod from your selected category from those listed on the left of the page

    download1_zps7d27ff19.png

    • Once you pick a mod, it displays the overview page for the mod
    • There are Updates, Reviews, Version History, and Discussion tabs available to pick from
    • The Discussion tab is the forum thread for this mod. You can discuss the mod in that thread, and ask questions about that particular mod in the same thread
    • Click the Download button as shown below

    download2_zps0b000411.png

    • Save the mod archive (zip, rar, 7cz) to a folder of your choice on your hard drive
    • Suggestion = Downloads/F1 2013/Mods
    • Browse to your chosen download folder, and unpack the archive to a new folder

    extract1.png


    extract2.png

    • Browse into the new folder created when unpacking the archive
    • There may be multiple folders
    • Continue into the nest of folders (if there's more than one), until you see one or more of the standard F1 2013 install folders which are normally present in your game install folder
    • In the bottom picture below, those standard F1 2013 folders are cars, characters, and garages.

    extract3.png



    extract4.png
     
    Last edited: Aug 30, 2014
  2. Graham Laing

    Graham Laing
    ...... mostly harmless Staff


    Manually Installing a Mod into F1 2013 (Steam Install)


    The F1 2013 install folder in Steam is :-
    • YourSteamInstallDrive:\Program Files (x86)\Steam\steamapps\common

    Backup Copy, in case it goes wrong (Optional)

    • Browse to your game install folder (as mentioned above)
    • Select the f1 2013 folder and copy it

    steam1_zpsd7833f8c.png


    steam2_zpsde260cf7.png

    • If you have the drive space, you can paste it straight back down into the 'steamapps/common' folder. This will create a new f12013 - copy folder next to the normal f12013 folder in your Steam install
    • As you are copying from one drive back onto the same drive, it can take quite a few minutes for the copying process to complete
    • Alternatively you can copy to another drive if you have one, and you have the space. Copying is quicker this way.
    • This just gives you a quick method of backing up your install, just in case things go wrong when you install a mod

    steam3_zpse153117f.png


    steam4_zpsb99cf568.png

    • Once the copying has completed, you can just leave the folder where it is, or you can rename it if you wish.
    • In my case I renamed the folder from f12013 - copy to f12013 Backup

    steam5_zpseb81f158.png


    steam6_zpsaece7d61.png


    Copying your Mod files into your F1 2013 Install

    • Browse to your F1 2013 install folder

    steam7-f12013_zps83e1f657.png

    • Open a new window and browse to the folder where you dowloaded and unpacked the mod you want to install
    • Select the standard F1 2013 folders from within the mod folder. Inthe picture below, you can see that there are 3 standard game folders in this mod - cars, characters, and garages
    • Copy the folders to the clipboard

    copy1_zpsd85ba9ae.png

    • Make your F1 2013 install folder window your active window
    • Paste the mod folders into your F1 2013 install folder
    • Select 'Overwrite Files' or 'Replace Files' when asked (depending on Operating System)
    • Your mod is now installed
    • If you have done something wrong, got confused and pasted things in the wrong place, and don't know how to undo it. Then if you made a backup copy as mentioned earlier in this post, you can copy the whole f12013 folder back into Steam to recover from the error
    • Alternatively, if you didn't make a backup, and didn't use a mod manager to install your mods, you can verify your game files via Steam. This will fix your game by downloading files (as necessary) automatically (Removing ALL mods).
    • Info about Steam Verification is here in this sticky thread

    copy2_zps6466aefc.png
     
    Last edited: Aug 31, 2014
  3. Graham Laing

    Graham Laing
    ...... mostly harmless Staff

    Installing Mods with the Ryder Mod Manager

    1. Download the Ryder Mod Manager from this link here
    2. There is no installer, the software can be run from where you unpacked it (your choice)

    Preparing the Ryder Mod Manager for first use

    • Once you have unpacked the RMM to a folder, I suggest creating a shortcut to place on your desktop. As shown in the two pictures below.
    • All pictures in this thread relate to Windows 8, but the procedures are the same or similar in other Windows operating systems.

    ryder1_zps078d5e14.png


    ryder2_zps3d64c66f.png

    Creating a F1 2013 Ryder Profile

    • Before you can use the mod manager, you must create a game profile for F1 2013, or for other games. All the F1 20xx games are supported.
    • Start the mod manager via the shortcut you created above.
    • Click OK when you see the warning shown below
    ryder3_zps063a0d30.png

    • Click the File Menu > Profile menu item

    ryder4_zps39f9cac1.png

    • Click - Add Profile

    ryder5_zps5df0cc44.png

    • Browse to your F1 2013 install folder. This tells the mod manager where your game is installed
    • The F1 2013 install folder in Steam is :-
    • YourSteamInstallDrive:\Program Files (x86)\Steam\steamapps\common
    • After selecting the F1 2013 install folder, click OK
    ryder6_zps50770b57.png

    • The Ryder Mod Manager now has a stored profile for F1 2013

    ryder7_zpsca47fbba.png
     
    Last edited: Jul 25, 2016
  4. Graham Laing

    Graham Laing
    ...... mostly harmless Staff

    Adding a new Mod to the Ryder Mod Manager

    • Download a mod to a folder on your hard drive
    • Unpack the rar/zip/7cz archive to a folder
    • Click File menu > Add > Folder
    • Browse to the folder that you unpacked the mod into

    adding1.png

    • When you browse into the new mod's folder, ensure that you browse to the folder above all the other folders, that are laid out in the same way are the game's install folder.
    • In the picture below you can see that I browse to and select the folder that has all the standard F1 2013 folders below it. In this case it's the 'SA2 Lambo Corse' folder, as the standard F1 2013 folders are below it i.e the cars, characters, and garage folders.
    • The mod you install may have less or many more folders with the same name as the F1 2013 standard folders.
    • Once selected, click OK

    ryder9_zps22f135fd.png

    • When you click OK, you will see the dialogue below. Select 'No'
    • There are other methods of using the Ryder Mod Manager, but we are only concerned with it's very basic mode for this tutorial

    adding2.png

    • You can now see that the mod has been added to the RMM's mod list
    • You can add as many mod as you like to this list, using the same method as above.
    • The mod is not installed to the game yet, just ready to install using the manager.
    • As this mod is not installed, it has a red cross next to it in the list.

    adding3.png


    Using the Ryder Mod Manager to Install a Mod

    • Once you have added a mod to the mod manager, you can install it to the game, or un-install it form the game as often as you want, all via the mod manager
    • To install a mod, select it from the mod list (there is only one in the list below), and click the 'Install' button

    ryder12_zps227b25c4.png

    • An installer window will pop up, and all you have to do is click the 'Install' button

    ryder13_zpscc87b28d.png

    • The mod manager will now install your new mod into F1 2013
    • Notice that the install will not only install the new mod, it will also keep a backup copy of the original files.
    • It uses those back up copies when you choose to uninstall a mod
    • Click the 'Finish' button when the mod has finished installing

    ryder14_zpsb7ca4de8.png

    • You will now be taken back to the mod list
    • The newly installed mod now has a green tick next to it, indicating that the mod has been installed into F1 2013
    • You can have multiple mod in the list, with some installed, and some not installed
    • You can switch mods in and out of the game as you wish, with a few clicks of a mouse.
    • This switching is useful, because you can have mods that you only install for career mode, but are illegal to use online in multiplayer mode (like grip changing mods, and mods that have an edited database. So if you decide to play online, you can boot up the manager, and quickly uninstall the offending mods temporarily.
     
    Last edited: Aug 31, 2014
    • Like Like x 3
  5. Graham Laing

    Graham Laing
    ...... mostly harmless Staff

    Un-installing a Mod with the Ryder Mod Manager

    • Once you have at least one mod installed into the game, you can select a mod in the mod list, and the Uninstall button becomes available to use.
    • Click the 'uninstall' button

    ryder16_zpsdaaf89b0.png

    • A window will appear with the uninstall in it, click the uninstall button

    ryder17_zps7ddc7230.png

    • When the process has finished, click the 'Finish' button

    ryder18_zpse13f1fb1.png

    • You can now see that the mod has been uninstalled
    • The mod remains listed in the mod list, with a red cross next to it, available for you to reinstall again

    ryder20.png


    Removing a Mod from the Ryder Mod Manager Totally

    • You can remove a mod permanently from the mod manager if you wish. Perhaps you are not going to use it again, or you have downloaded a new version of the mod and want to install that instead.
    • Click the File Menu > 'Remove' option

    ryder21.png
     
    Last edited: Aug 31, 2014
  6. Graham Laing

    Graham Laing
    ...... mostly harmless Staff

    Alternative Method of Installing Mods into F1 2013

    There are many ways to install and manage mods but it's not always convenient to have third-party tools manage everything. However, it's actually pretty easy to have your own mod management system and all you need is some HDD space.

    In this example we'll use F1 2013 The Game to create a step-by-step guide on how to do so.

    Requirements
    • double (better thrice) the space that's actually needed for the game
    • a rough idea which mods you'll need
    How to
    • new mods will go into the PLAY directory of the game, that's the folder you're starting the game from
    • if you like those mods they will go into the FRAMEWORK directory of the game, that's the folder you're storing your mods in
    That way you can simply test mods and copy the FRAMEWORK back into your PLAY directory without worrying about which files you need to replace. First of all you should get an idea which mods you want and need. I suggest creating something like this.

    alt1.jpg

    It's not a requirement but it'll make it a lot easier to find that one mod you're looking for. After you've done that (as I said, optional) you can start building the framework. All you need to do is manually recreate the folder structure from the F1 2013 The Game directory. In the end it should look like this.

    alt2.jpg

    That way all you need to do is marking all folders (CTRL + A) and copy (CTRL + C) them so that you can insert (CTRL + V) them into your game folder. Overwrite all files if asked and all mods are installed immediately. I suggest having a clean backup of the game ready in case anything goes horribly wrong - that way you don't need to download files from Steam again. In this picture you can see the following directories:
    • f1 2013: the game itself, the PLAY directory
    • f1 2013 - Kopie: kopie means copy, so that's an older copy with some mods installed (you don't need that after all)
    • F1 2013 Modding Base: the FRAMEWORK directory, containing all mods but NO original files
    • F1 2013 Original: a fully patched and updated copy of the game without any mods
    alt3.jpg

    Just keep the following in mind and always install mods accordingly:
    • never install new mods to the FRAMEWORK directory, test them in your PLAY directory
    • if you like them install them to the FRAMEWORK directory as well
    • avoid mixing the folders up to avoid a possible file mismatch
    needhelp.png
    If you need any help please feel free to ask away!
    If you see a post which is offensive or bullying, please hit the 'Report' button at the bottom of any post.


    Cheers,

    The
    F1 Team
     
    Last edited: Aug 31, 2014
    • Like Like x 1
Thread Status:
Not open for further replies.