Brake and Throttle problem in rFactor

[jetplaner]

I have a Logitech G27 Wheel and when l barrely push the throttle or brake the meter goes to full. Any suggections?

 

[David Dominguez]

If this is a problem only with rFactor you should have opened this thread on the rFactor forum

Anyway, make sure you have not messed something on the pedal sensitivities, first of all.

 

[Morgan Morand]

It's normal if you activate the logitech G27 and you don't push the throttle or brake to full,
If you pushed only at 20% the brake, the software will think that you are at 100% if you push at 20% again.
Or if you have done that and the problem is still there, check the pedal sensitivities like David said

 

[jetplaner]

I've calibrated and it works.