F1 2012 what settings for csw ?

[Brian McManus]

what setting do people use for there formula csw's
ingame,
everything set to 0
feedback 100
enviroment 100
weight 10

wheel,
sen 160
ff 100
sho 100
abs 70
lin 40
dea 20
dri 1
for 100
spr 130
dpr 320

it would be intresting to see what another are using.

 

[Sheldon Cannon]

I'm getting mine today... I'll let you know.

 

[Rodriggo]

Haha! I was just going to post this.

130 SPR!!! Wow, your arms must be like noodles by now.

My settings:

ADVANCED

linearity 5%
throttle saturation 10%
brake saturation 25%

FF

feedback 100
enviroment 100
weight 100

WHEEL

sen 280
ff 100
sho 100
abs 85
lin 0
dea 0
dri -3
for 190
spr 30
dpr 0

I have no idea what I'm doing but I spent the better part of four hours trying to get this right....still a work in progress. Too heavy right now but don't want it to feel too light either.

Thanks for sharing, gonna try this.

Some links I managed to scrounge up:

Video on CSW with suggested wheel settings. In-game he uses 10%FFB, 10%EFF, AND 0%WEIGHT.

CSR Elite setup from Codemasters?

Second CSR Elite setup

A CSR setup

Anyone know if there are some settings to avoid? So as to not overwork or damage the inner workings?

 

[Rodriggo]

Anyone know if ABS is just for CSPedals? Still using my G25s unfortunately, might upgrade later. Am I supposed to be feeling ABS in the wheel or in the pedals?

 

[William Moody]

Anyone know if ABS is just for CSPedals? Still using my G25s unfortunately, might upgrade later. Am I supposed to be feeling ABS in the wheel or in the pedals?

Yes m8 just for the clubsport pedals.

 

[Rodriggo]

Yes m8 just for the clubsport pedals.

Thanks!

 

[Brian McManus]

cool im going to give that a go.
my arms are holding up
the wheel is actually light .

 

[Rodriggo]

Updated my settings, feel pretty good about this one...both twitchy and tight...going into career with it unless someone else cracks it.

I did like 120 laps at Melbourne...adjusting over and over and it's about as good as I could do to almost eliminate the default dead zone that's been in Codemaster's F1 since the first patch for 2011.

ADVANCED

linearity 2%
throttle saturation 10%
brake saturation 30%

FF

enviroment 100
feedback 100
weight 90

WHEEL

sen 320
ff 100
sho 60
abs OFF (I don't have CSPedals)
lin OFF
dea OFF
dri +1
for 200
spr 80
dpr 160

One thing I definitely don't like is the "sawing" sensation of setting DRI to a negative number but at +1 it helps smoothen out the snap of the SPR setting, DPR does this also.

Overall I'm trying to get a smooth and very firm force feedback from 0 degrees to whatever degree the wheel is at when I hit the slowest hairpin...all without compromising response...I'd say this is close but hopefully someone can get it even better.