Ive made a new torque curve for a new car im working on.
The torque curve reachs a maximum of 265ft-lbs.
The car was working correctly with the old Curve, i just simply overwrote the old curve with the new curve, now the car does not run....
The last racer i worked with was around 0.7.5 or something, has something changed in regards to torque curves.
My Car.ini is as follows...
I have only adjusted the idle RPM, ive attached the torque curve.
The torque curve reachs a maximum of 265ft-lbs.
The car was working correctly with the old Curve, i just simply overwrote the old curve with the new curve, now the car does not run....
The last racer i worked with was around 0.7.5 or something, has something changed in regards to torque curves.
My Car.ini is as follows...
engine
{
mass=0
idle_rpm=1500
max_rpm=8300
curve_torque=Torque.crv
max_torque=1
torque_reaction=0.2
autoclutch_rpm=1200
starter=0
starter_torque=60
stall_rpm=500
start_rpm=700
start_stalled=0
I have only adjusted the idle RPM, ive attached the torque curve.