Vibration mounts

[Zoof2]

I recently added these to my rig . Rig sits on four of these mounts and has really stopped the vibration passing downstairs and to the rest of the house from my bass shakers.
Had to stabalize the rig also as these are obviously spring based but work really well to dampen the vibration.

 

[asteroulis]

Any link you could provide would be extra helpful , thanks!

 

[Zoof2]

5-Spring Pad

Thanks to their low suspension frequencies and large deflection, this anti-vibration spring support series allows the reduction of vibrations and the elimination of structure-borne noise generated by pumps, machines, HVAC systems etc installed in buildings. This Vibrostop product is available in...

avmr.com

Like i said i had to be a bit creative and stabalize the rig in the centre as these are spring based mounts but reallly stopped the transfer of vibration from an upstairs bedroom.

 

[Mr Latte]

I've seen these in the past and the different variants. They looked to be reasonably priced (for what they are) but it would be more interesting/helpful if you showed images of your rig with them installed and your tactile you are using.

Had you tried other solutions or specialist noise reduction/antivibration materials before buying these?

 

[Zoof2]

I did try rubber mounts ,rubber Mats , antivibration mats and wood and a combination of all . I did get some dampening but it was still shaking the downstairs way to much. These have been my best solution .
I currently have two Reckhorn bass shakers mounted under seat and pedals but looking to add maybe 2 more so wanted a solution before problem got worse and the wife banned them lol !!

 

[Emery]

Looks like if you use 4 of these, the 160-200 daN range is what most people would want.

 

[_catman]

Would you be able to help me with choosing a suitable solution? The problem is I have no knowledge about frequency ranges and recommended loads described in those products spec sheets...

If you could explain to me how you chose which I would be very grateful, thanks!!

 

[MatB]

There's one of these at each corner of your rig? Can you elaborate on what you mean by "I had to stabilize my rig in the center"? Thanks.