Triple monitor settings for Raceroom

Zoof2

75RPM
Oct 3, 2017
90
24
44
Does anyone have there triple monitor settings for RaceRoom ? I have 27 inch triple monitors and set up the -TRI SET UP IN STEAM LAUNCH but just dont seem to get a good F.O.V with whatever numbers I input into the launch options .
Thanks in advance if anyone can help.
 

tlsmikey

500RPM
Feb 24, 2016
699
404
44
Here's what i use in the launch options. 3 x 27" monitors at a 55 degree angle roughly. I'm about 28" away from the front screen.

In game FOV is either 0.6 or 0.7. My calculated setting is exactly in the middle so i flip back and forth.

-triScr 27 -0.5 23.5 13.25 0.75 23.5 13.25 0.75 45 23.5 13.25 0.75 45
 

Zoof2

75RPM
Oct 3, 2017
90
24
44
Here's what i use in the launch options. 3 x 27" monitors at a 55 degree angle roughly. I'm about 28" away from the front screen.

In game FOV is either 0.6 or 0.7. My calculated setting is exactly in the middle so i flip back and forth.

-triScr 27 -0.5 23.5 13.25 0.75 23.5 13.25 0.75 45 23.5 13.25 0.75 45
Appreciated il give it a try !!☺
 
Sep 23, 2014
293
123
34
I've just recently updated to 3X27" and I just can't find out how to use the triple screen setup on raceroom. It's working fine with AMS, rF2, AC, iRacing and DIRT Rally. It doesn't give me the option to change the resolution. Am I missing something here?
 
Sep 23, 2014
293
123
34
Nice. Thank you. I was assuming it would be like the other sims that I just selected the resolution and set the FOV. Really apreciated. :thumbsup:
 

Martin Fiala

6000RPM
Premium
Jun 30, 2011
6,080
5,718
43
@Alexandre Costa It kinda sounds like you might not have the triple screen set up correctly in the other games as well, since I believe it should be a bit more involved than simply setting the resolution and FOV. There should probably still be settings for screen angle and all that stuff. But I have very little experience with actually *using* triple screen, so I might be wrong.
 
  • Like
Reactions: Alexandre Costa
Sep 23, 2014
293
123
34
I have configured the AMD Eyefinity to correct the screen borders, so the image is properly adjusted from one screen to the other. The FOV is properly calculated using the project imersion website. I think that only the angle needs a better adjustment, but it's not bad the way it is right now. Thank you for your help.
 

TheRealCeeBee

100RPM
Jan 4, 2020
109
137
48
if it helps i just set this up now, copied my same numbers from PC2/AMS2 to the command line, then set my seat/fov and "eye centre" keys to QAWSEDRF, only a tiny bit of tweaking, the bezel offsets are about 0.5cm out as far as i can tell. reduced them by that and was all good.
(3x 27inch monitors, 60cm from centre screen, 45deg angles on side screens)
-triScr 60 -5 60 34 1.5 60 34 1.5 45 60 34 1.5 45

 
Last edited:

2stains

500RPM
Jan 27, 2016
973
434
45
Ya... caught that one the first time I drove laguna and sudddenly billboards appearred and dissapeared in my side views.. initially I thought my mispent youth was causing acid flashbacks..
Yes you are right, billboards not shadows, lol I forgot.... Probably because of my misspent youth, trips where all the rage when I was 18 :p