The SimFeedback-AC DIY Motion Simulator thread

Hey guys. Thought I’d create a thread for those taking the plunge into this brilliant DIY project..
I will be starting mine soon and I know there are others thinking about it.. so feel free to share your knowledge and experiences so we can all enjoy this platform to its full potential. A huge thanks to the developers who have really knocked this one out of the park!

Website: https://opensfx.com/2019/02/20/welcome-to-our-new-site/

Github: https://github.com/SimFeedback/SimFeedback-AC-Servo/wiki

For all the internals for the actuator contact Amy - skye@ntl-bearing.com
She can supply everything you need. Just remind her you want the ends of the shafts chamfered and make sure she sends the right sized ball screw - we have had a couple of issues reported. She is very helpful though and the cost is pretty good.


Huge thanks to @RowanH for writing a comprehensive user guide which can be accessed here - https://www.rowanhick.com/sfx-100-build-and-running-guide

In addition, @anton_Chez has contributed a list of post numbers for some of the important settings etc..
Post #320 SFX-100 thread
Post #327 SFX-100 thread for Discord correlation
Post #339 SFX-100 thread
Post #418 SFX-100 thread
Post #424 SFX-100 thread
Post #439 SFX-100 thread
Post #449 SFX-100 thread
Post #517 SFX-100 thread
Post #554 SFX-100 thread
Post #580 SFX-100 thread
Post #826 SFX-100 thread
Post #837 SFX-100 thread
Post #864,866,867,868,870,887,889,897 SFX-100 thread
Post #911,914 SFX-100 thread
Post #988,992,998 SFX-100 thread
Post #1147 SFX-100 thread
Post #1492 SFX-100 thread
Post #1511,1517 SFX-100 thread

I will try to keep this page updated with links to source the parts in other parts of the world. Just post whatever links you have and i'll add them here.

Please note: Not all the parts listed below are essential for the project. For the essential parts refer to the original shopping list.

Australia:

Thanks to @AussieSim for the following links:

10A power lead(s) * 4
https://www.jaycar.com.au/2m-black-mains-extension-lead/p/PS4152

Top quality wire stripper
https://sydneytools.com.au/product/boxo-cutws205-multifunction-wire-stripper

RCD/safety switch power block
https://www.bunnings.com.au/arlec-4-outlet-heavy-duty-portable-safety-switch_p4420028

WD-40 lithium grease for the ball screws
https://www.bunnings.com.au/wd-40-specialist-300g-high-performance-white-lithium-grease_p6100408

Vibration pads
https://www.bunnings.com.au/whites-on-site-100-x-12-5mm-rubber-anti-vibration-mat-4-pack_p3961547

WD-40 Dry PTFE spray for the slider (free shipping)
https://au.rs-online.com/mobile/p/lubricants/7577134/

Arduino Leonardo (free shipping + frequent 10-15% off discount)
https://www.arrow.com/en/products/a000057/arduino-corporation

DB25 cables * 4 (free shipping)
https://www.arrow.com/en/products/ak401-2/assmann-wsw-components-inc

PETG * 3 (free shipping)
https://www.arrow.com/en/products/petg17bk1/mg-chemicals

WAGO-like connectors to avoid a breadboard (perhaps use genuine ones if you are doing 240V AC)
https://www.aliexpress.com/item/32906719488.html

D-Sub breakout boards * 4
https://www.aliexpress.com/item/32297675967.html

3D printer Creality Ender-3 Pro
https://www.aliexpress.com/item/32918302452.html

Wires from Arduino to D-Sub breakout (remove black plastic from the WAGO end)
https://www.aliexpress.com/item/32887680826.html

Crimp connectors for AC wire leads
https://www.aliexpress.com/item/32813550981.html
 
Last edited by a moderator:
Looks Good ill follow this project. I currently have 3 Linear actuators and with AKM32 servos on them and drive to suit im about to Start building them. I was just about to work out the Position Feedback so this project may be able to help me with that part.
 
Upvote 0
Can be cheaper pending your suppliers.

Not that much, i think. It's also very dependant on your location (shipping) and off course the import taxes of your country.


I ordered the servos on sunday and the rest of the shopping list today.


Sure there might be cheaper suppliers, but i just did not want to take the risk of receiving a part that's slightly different and run into problems later on.

I even ordered an orginal arduino leonardo at 22 euro....... Just in case.:D

A couple of things:

-Join amazon prime, even if it's just for one month, to get free shipping on almost everything.
-Don't get fooled by the ending discounted prices of the servos on ali express, they have a new sale every day / week
- It seems like with every seller you pay per servo for shipping, negotiations have little to no use.
If you buy 4 servos, you almost pay 4 times the shipping cost.

So all things are set in "motion" and in the meanwhile the MK3 is doing it's thing.
 
Last edited:
Upvote 0
- It seems like with every seller you pay per servo for shipping, negotiations have little to no use.
If you buy 4 servos, you almost pay 4 times the shipping cost.
.

I deal with many Ali Express/baba sellers whom do volume discount and 98% of the time offer better shipping rates than what is listed in the shopping cart. I practically never pay the listed shipping price unless its small $$ stuff, Any sizable $$ they will work with you.

I Highly suggest asking for future orders, as it sure cant hurt.

PS where did you get your 100x100 from ?
 
Last edited:
Upvote 0
Ah ok, makes sense. The $$ just doesn't work for me ordering from Germany, so have to find a solution.

If push comes to shove, I will re draw the Slider to match the extrusion i can get, But the Exact shape still has me curious as The very small difference i see has me slightly concerned.
 

Attachments

  • Problem.png
    Problem.png
    175.8 KB · Views: 1,241
Upvote 0
Ah ok, makes sense. The $$ just doesn't work for me ordering from Germany, so have to find a solution.

If push comes to shove, I will re draw the Slider to match the extrusion i can get, But the Exact shape still has me curious as The very small difference i see has me slightly concerned.

A redesign of the slider would be the fastest and easiest option. Especially for you mate, since you too know your way around in the 3d printing area.

Are you gonna use PTEG instead of PLA, like me?

Nick, can you please take a look at this with your expert DIY eye?

In my opinion both bearings are identical. Or am i missing something?


screenshot_338.png


Left one in stock ordered and arriving this week, right one out stock but on the shopping list and delivery up to 56 days.
 
Upvote 0
A redesign of the slider would be the fastest and easiest option. Especially for you mate, since you too know your way around in the 3d printing area.

Are you gonna use PTEG instead of PLA, like me?

Nick, can you please take a look at this with your expert DIY eye?

In my opinion both bearings are identical. Or am i missing something?


screenshot_338.png


Left one in stock ordered and arriving this week, right one out stock but on the shopping list and delivery up to 56 days.


Ya thats true, Im no stranger to Fusion or file editing, I wonder if Michael will just share a Fusion file that would only require super minimal tweaking to match my Extrusion. its Such a Small Fraction, but its something i seen, so need to know the answer.


Ya ill use PETG Over PLA for sure, $$ wise its no different but strength in general is much higher on petg...PETG can have some Flex where PLA is more rigid, But doesn't really apply here for flex.

All the parts in this Unit are under Compression stress which Printed parts will handle no problem 20% infill is more than ample,...not sure i see the point of the "Include Solid Diaphragm Every 20 layers" A single "half solid /thin layer" wont really add any internal strength imo.

Bearing look fine, Im going with a generic AliExpress unit.

https://www.aliexpress.com/item/2pc...pm=a2g0s.13010208.99999999.265.7d353c00mO6cBl
 
Upvote 0
Hey dudes I'm keeping an eye on this thread as I am starting to get interested in this project. @sjb266 Simon, I'm a fellow Aussie as you already know so if I can help you with ordering stuff in bulk for better prices, I'd be open to that. Just need to know what you're expecting to pay for the completed project of 4 actuators so I can work out if it's going to be worth moving on from the V3 I currently run.

I noted in another thread, but I'll put it out here too. I can do DIY stuff but for this I really can't be bothered working it all out. If you wanted to build these things for me, we can get all the hardware sent to the one address, have them all built, organise the shipping of my units to me, and I can pay you to have done so. Again, would like to know if you're interested in this scenario and what you would be willing to accept to assemble them into a working state for me.

I don't have 3D printing hardware / experience so that's another thing I'd need to outsource. From others approximate pricing (in euro's, but still something to go off) it seems that the entire project would be worth it, even for us Aussies with shipping and even having someone build for me. I can offload the V3 pretty easily I'd say and for a couple thousand surplus I'd be into a 4 actuator full chassis mover. Not too bad I'd say.
 
Upvote 0
Hey Anton..

Yeah we can probably work something out for sure. Im still in the process of sourcing components locally vs OS.. most of the leg work is done.

I have been advised by a prominent sim hardware retailer and beta tester that the performance of this setup is spectacular and absolutely comparable to dbox.

Fast, powerful, and tough.. he said it’s the best sim DIY project since OSW.

I’ll keep you informed as my stuff arrives and we can work something out if you wish..
 
Upvote 0
Wow, that's some good feedback for sure. I am really looking forward to what you come up with regarding the sourcing of parts and materials. I sort of brushed off your suggestion of getting on board with it as I'd been convinced I was done for the time being with building. Wanting to actually spend some quality time actually racing, which I am finally doing lots and lots of. But I read a little more into it and some enthusiasm from other members here has really got me excited to jump into it.

Hoping for some updates in the near future and it you're comfortable and confident in building your own units, I'd be happy to get you to do mine too. If that's something you're into. Again pricing of everything is going to be a determining factor as I already have a decent set up as is. But with owning a D-Box being something I'd like vs the cost of entry, this seems to be a no brainer to me as a very viable alternative. Especially considering the new Next Level platform that's about to launch, I'd much rather go this route than pull the trigger on that early and regret not persuing this instead.

Keep us posted.
 
Upvote 0
Yeah cool. From what I’ve seen it looks a bit faster than the dbox and something I will be able to diagnose and repair myself if something goes wrong...which is a HUGE benefit.

The best way to do it is probably for me to get mine up and running then you can decide if you trust me or not!!! For me this is the ultimate DIY project!

I will certainly keep you posted.

Cheers.
 
Last edited:
Upvote 0
This is a great post, something I’ve been reading up on for the past few nights, I have a v3 but this is the ultimate, I’m in uk so looking to source parts some are out of stock , look forward to future posts
 
Upvote 0

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 74 7.1%
  • 75% online 25% offline

    Votes: 110 10.6%
  • 50% online 50% offline

    Votes: 150 14.5%
  • 25% online 75% offline

    Votes: 286 27.6%
  • 100% offline racing

    Votes: 414 39.9%
  • Something else, explain in comment

    Votes: 4 0.4%
Back
Top