Upcoming Events

Weekly BMW races on Simracing.GP Other regular AC events on Simracing.GP Weekly GT3 Sprint Races on Simracing.GP Rookie friendly WTCR sereis Weekly rFactor 2 events
Resource icon

Other Telemetry Tool for AMS2 11.1

Log in to download, or make sure to confirm your account via email

Iko Rein

Premium
Messages
696
Points
1,312
Iko Rein submitted a new resource:

Telemetry Application Version 10 for AMS2 - Real-time and offline Telemetry and race strategy application for Sim Racing

The port of my Telemetry Tool for Automobilista 2 is here.

This version works now with AMS2. It also works with Assetto Corsa Competizione, F1 2013 to F1 2020, Project Cars 2 and Dirt Rally 2.0.

I have developed this tool for many years for the F1 series, but lately have added support to other games, which I myself actively play.

This is the tool to make you drive faster regardless of your driving level.

The tool can be used both offline and real-time to analyze telemetry data, car...

Read more about this resource...
 

Sax

Messages
12
Points
36
Great tool, thanks for the effort

Is there a way to clear the data for the session?
I am now comparing my laps against a faster car from an earlier session
 

Iko Rein

Premium
Messages
696
Points
1,312
You could clear the current data by changing the track form the top left dropdown and then changing it back. That resets most of the data. If you do that during live race/session, all data prior in the race will also be gone too. But not the data saved on disk, i.e. lapdata.

Cheers.
 
Messages
2
Points
0
That's not possible, because the API is providing only basic data for the other participants like driver name, car model, coordinates on map, speed, orientation, timings. But no other car telemetry.
 
Messages
2
Points
0
You have to set the UDP Protocol Version to Project CARS2 and then the UDP Frequency, which is I think defined like this:

UDP off
UDP 1 60/sec (16ms)
UDP 2 50/sec (20ms)
UDP 3 40/sec (25ms)
UDP 4 30/sec (32ms)
UDP 5 20/sec (50ms)
UDP 6 15/sec (66ms)
UDP 7 10/sec (100ms)
UDP 8 05/sec (200ms)
UDP 9 01/sec (1000ms)

1 means 60 UDP packets per second
9 means 1 UDP packet per second

1 is theoretically the best setting.
I have it on 5, because with lower values (which means more packets per second) many wifi routers and repeaters have problems handling the high traffic load. I also have this problem.
This is because the packets are sent as Broadcast, that means the packets are sent to all devices in your network, whether they use it or not.
 
Messages
417
Points
457
Thank you for your work on this Iko!

Does AMS2 provide tire temperature and ride height telemetry info? I’m not seeing it in this app but perhaps I’m overlooking it or it depends on which car you’re driving.
 

Iko Rein

Premium
Messages
696
Points
1,312
There is some tyre temp information. I only save the tyre surface temperature to the data files. During driving you can see surface + carcass temperature in the Driving pane. And if you press key 'X' for extra data, then you can see also the inner/center/outer temps of the tyre. There is also some other tyre temperature data available (like rim temp), but I haven't found good way to show them.

The tool also provides the suspension movement data and you can use e.g. the historgram to see that. In the data there is also the rideheight info and suspension rideheight. I am not saving that data to the datafiles, but could make it maybe available in the future on the Driving pane.

Cheers.
 

Iko Rein

Premium
Messages
696
Points
1,312
Iko Rein updated Telemetry Application Version 10 for AMS2 with a new update entry:

Telemetry Application for AMS2

New update to the version 10.

If you are updating, just replace the telemetry.jar in your installation.

If you are doing a new installation, read the ReadMe.txt first on how to install the tool.

Key changes in Version 10.1:

ACC

Added new cars in GT4 DLC
Updated the ACC_Relay to retrieve new data added in 1.15 of ACC. You must use the new relay 1.05 with the Telemetry tool version 10.1.

XY Plotter
Added (optional) scale to the graphs and made it better in showing some of...

Read the rest of this update entry...
 
Messages
5
Points
16
Thanks for this tool! While it works fine (v10.1) with PC2 and F1 2018, the tool quits immediately when i execute "runWin_DR2.bat" for Dirt Rally 2.

I have setup the hardware settings for Dirt Rally 2 and it works with other telemetry apps.
 

Iko Rein

Premium
Messages
696
Points
1,312
Just a heads-up.

I am travelling next few weeks and just noticed, that Hockenheim tracks have been released. The tool should work ok with these new tracks without any extra data. It will also create a simple track map based on the first clean lap on each track.

During my travels I will only have with me my old laptop, which surprisingly is so old, it cannot run AMS2, thus getting the track maps done is pretty tough. I am getting help on getting the track maps done, so hopefully might be able to create a small data pack for AMS2 with the Hockenheim tracks in the near term.

Cheers.
 
Messages
132
Points
311
when changing the network settings to point to AMS2 it seems to keep defaulting back to F12020 settings

Am I doing something wrong or is this a bug?
 

Iko Rein

Premium
Messages
696
Points
1,312
Just start the tool with the the runWin_ams2.bat. This sets everything properly.

I you change the network settings and run the tool just with runWin.bat, then you must also change the game feed mode in the settings, not just port number.

Cheers.
 

Iko Rein

Premium
Messages
696
Points
1,312
Seems, I cannot upload .zip files here.

With AMS 1.0.2.5 there were many renamed tracks in the data, but I didn't want to do new release now just for the file name changes. In 10.2 I will need to do some extra work to make sure, in the future a name change from Reiza is easier to handle.

You can download the AMS2 new trackmaps + the updated tracklist from
http://www.ikorein.com/telemetry/ams2.html

Just unzip the contents (ams2_tracks.csv + .track files) to the tracks\ams2 directory and replace/update the files there. If you don't play AMS2, you don't need to load these.

With this there is small caveat: Your fastest laps will not show on the renamed tracks. For the time being you have to rename them by hand, e.g. 'adelaide_historic_p.csv' --> 'adelaide_adelaide_historic_p.csv' to make the tool load the correct fastest lap. In 10.2 I will fix the need for renames.

Cheers.

PS. the track file renames are listed below:
===================================
adelaide_modern --> adelaide_adelaide_modern
adelaide_historic --> adelaide_adelaide_historic

brandshatch_gp --> brandshatch_brandshatch_gp
brandshatch_indy --> brandshatch_brandshatch_indy

brasilia_full --> brasilia_brasilia_full
brasilia_outer --> brasilia_brasilia_outer

cascavel4_cascavel5 --> cascavel4_cascavel

interlagos_gp --> interlagos_interlagos_gp
interlagos_historic --> interlagos_interlagos_historic
interlagos_outer --> interlagos_interlagos_outer

kyalami_gp --> kyalami_kyalami_2019
kyalami_historic --> kyalami_kyalami_historic

montreal_modern --> montreal_montreal_modern
montreal_historic --> montreal_montreal_historic

santacruz --> santacruz_santacruzdosul

snetterton_100 --> snetterton_snetterton_100
snetterton_200 --> snetterton_snetterton_200
snetterton_300 --> snetterton_snetterton_300

spielberg_modern --> spielberg_spielberg_modern
spielberg_short --> spielberg_spielberg_short
spielberg_historic --> spielberg_spielberg_historic
spielberg_vintage --> spielberg_spielberg_vintage

taruma_internacional --> taruma_taruma_internacional
taruma_chicane --> taruma_taruma_chicane

velocitta_trackday --> velocitta_velocittatd
velocitta_clubday --> velocitta_velocittaclubday
===================================
 
Messages
32
Points
0
thanks for your work!
one question: can I save a lap data? I don't see the option in file menu...
 

Iko Rein

Premium
Messages
696
Points
1,312
thanks! Then I'll looking for them, somewhere in my hard disk :laugh:

When you have driven few laps, you can press on the tool CTRL-O or go 'File' --> ' Open File (as Red lap)' and you can open the saved files and also see, where the files are stored.

Cheers.
 
Top