Steering on controller issues?

Hi there,
I'm just now getting frustrated with a small issue now I've noticed it: when I'm steering with my controller, it's as if there's an early deadzone, yet the deadzone setting in CM is set to 0 and always has been, I've checked. It just won't smoothly make really fine turns like I need to. Any help with this?
 
In Windows Command Prompt, if you launch `joy.cpl`, select controller, then [Properties],
do you sense any dead spot when moving the stick smoothly thru the suspected dead zone?
You could try Calibrate under Settings there..
If still a dead spot, then a custom LUT (look-up table) could help linearize response.
Here is a good LUT resource: RasmusP's LUT Guide
While it is specific to Logitech wheels, the game does not care whether a LUT is used for wheel or controller.
 
Last edited:

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 102 7.9%
  • 75% online 25% offline

    Votes: 134 10.4%
  • 50% online 50% offline

    Votes: 184 14.2%
  • 25% online 75% offline

    Votes: 363 28.1%
  • 100% offline racing

    Votes: 504 39.0%
  • Something else, explain in comment

    Votes: 5 0.4%
Back
Top