This is a great system that I am currently using in conjunction with an SFX100 system and GSeat. I am selling because I’ve decided to completely redo my rig in full DIY style to better fit my goals.
Priced to sell. Local pickup only in Toronto, Ontario, Canada.
1. Partial SimXperience Stage 2+ (Nearly complete hardware for stage 3) - $1000 CDN (approx $800 US)
2. Heavy Duty Custom Powder Coated Steel Brackets to mount sfx100 system to SimXperience Stage 2 - $250 CDN for set of 4 brackets
Unique opportunity to save and get into 2DOF or 3DOF motion. Forget about worries associated with used equipment.
The system comes with all hardware in the SimXperience Stage 2 new kit except for two components you will need to purchase from SimXperience to make it complete:
1. Universal Motion Seat kit ($557 US)
2. 150mm SCN5 motion starter kit ($1365 US) as I will be reusing the actuators
The total savings once you buy these parts is still $1000 CDN vs buying new from SimXperience and you will have brand new actuators with a warranty that are the only parts that potentially wear down over time on a system like this.
I will also include at NO ADDITIONAL COST nearly all the additional rear traction loss hardware for the SimXperience Stage 3 new kit. In order to function as the complete stage 3 kit, you will need to purchase one extra actuator from SimXperience (just buy the 3DOF 150mm SCN5 kit instead of the 2-actuator version I listed above). You will need to source one bracket for the rear traction loss actuator, two 1 3/8" x 0.75" tall caster wheels, and 2 acrylic 4" x 10" x 0.25" plates. (These parts can all be easily obtained for under $200 CDN.)
The total savings for this stage 3 system once you buy these parts is still closer to $1800 CDN and you will again have brand new actuators with a warranty that are the only parts that potentially wear down over time on a system like this.
Priced to sell. Local pickup only in Toronto, Ontario, Canada.
1. Partial SimXperience Stage 2+ (Nearly complete hardware for stage 3) - $1000 CDN (approx $800 US)
2. Heavy Duty Custom Powder Coated Steel Brackets to mount sfx100 system to SimXperience Stage 2 - $250 CDN for set of 4 brackets
Unique opportunity to save and get into 2DOF or 3DOF motion. Forget about worries associated with used equipment.
The system comes with all hardware in the SimXperience Stage 2 new kit except for two components you will need to purchase from SimXperience to make it complete:
1. Universal Motion Seat kit ($557 US)
2. 150mm SCN5 motion starter kit ($1365 US) as I will be reusing the actuators
The total savings once you buy these parts is still $1000 CDN vs buying new from SimXperience and you will have brand new actuators with a warranty that are the only parts that potentially wear down over time on a system like this.
I will also include at NO ADDITIONAL COST nearly all the additional rear traction loss hardware for the SimXperience Stage 3 new kit. In order to function as the complete stage 3 kit, you will need to purchase one extra actuator from SimXperience (just buy the 3DOF 150mm SCN5 kit instead of the 2-actuator version I listed above). You will need to source one bracket for the rear traction loss actuator, two 1 3/8" x 0.75" tall caster wheels, and 2 acrylic 4" x 10" x 0.25" plates. (These parts can all be easily obtained for under $200 CDN.)
The total savings for this stage 3 system once you buy these parts is still closer to $1800 CDN and you will again have brand new actuators with a warranty that are the only parts that potentially wear down over time on a system like this.
