Seat install... still confused

Do I still need something else to mount my seat? I ordered a universal slider but now I am still not too sure how it will come together even with the slider. Any help would be greatly appreciated.
 

Attachments

  • seat3.jpg
    seat3.jpg
    388.5 KB · Views: 242
  • seat2.jpg
    seat2.jpg
    409 KB · Views: 247
  • seat1.jpg
    seat1.jpg
    405.8 KB · Views: 235
  • seat4.jpg
    seat4.jpg
    449.2 KB · Views: 238
Don't panic, but you have a bottom mount seat and side mounts.

For a quick fix I would use 4 (spare) angles and bolt them tightly to the bottom of the seat with the horizontal bolt hold facing in. Hopefully you got some extra parts when you ordered the chassis. Then loosen the rails on your frame so they are just inside where these angles come down and bolt directly to that.

Or you may want to bolt your seat straight to the slider if the holes match up and then bolt the slider down to the rails. You didn't post an image of your slider so I don't know how that would work.

However it looks like you may have a plate that fits your seat and would also allow you to bolt straight down to the 8020 profile. So you likely have a few options.
 
Upvote 0
If I remember correctly, I drilled holes through the side of the rails that touch the 80/20 and then mounted the L brackets to them. I then used T Nuts to mount it to the 80/20. I hope these photos help.
 

Attachments

  • IMG_4120.jpg
    IMG_4120.jpg
    128.8 KB · Views: 199
  • IMG_4121.jpg
    IMG_4121.jpg
    128.4 KB · Views: 200
Upvote 0

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 96 7.7%
  • 75% online 25% offline

    Votes: 130 10.5%
  • 50% online 50% offline

    Votes: 175 14.1%
  • 25% online 75% offline

    Votes: 350 28.2%
  • 100% offline racing

    Votes: 484 39.0%
  • Something else, explain in comment

    Votes: 5 0.4%
Back
Top