Updated 7/22/2015 (CSR / DFGT ingame)
Jack Spade (66% SopLateral 1.7)
Wheel Settings GT3 / CSR / DFGT
Sen 900 or OFF / 900 or OFF / 900 DOR
FF 100 / 100 / 100 OES
Sho OFF / OFF
dri off / off
Abs 65-70 / 65-70 (CSR pedals clutch/brake inverted)
Lin 0 / 0
dea 0 / 0
spr off / off / 0 SES
dpr off / off / 0 DES
Check 0 CSS
Check Allow Game
Ingame (66% SopLateral 1.7)
FFB 100
Tire Force (GT3 User Preference / CSR 10 (Patch 2.5) /
DFGT 9 (Patch 2.5) with non-stock DFGT motor
Deadzone Removal Range 0 / 0 / .05
Relative Adjust Gain 1.10
Relative Adjust Bleed 0.10
Relative Adjust Clamp 0.95
Scoop Knee .70
Scoop Reduction .15
Soft Half 1.29
Soft Full 1.10
Low Speed Spring Saturation .17 DFGT
Post from PCARS forum
Jack Spade (66% SopLateral 1.7) Wheel Settings DFGT (or see below post #1767)
900 DOR
100 OES
0 SES
0 DES
Uncheck 0 CSS (if you play other games this can be checked)
Check Allow Game
Reset wheel Ingame works with 99-100/900 (Note almost the same settings with CSR)
Custom (not Default or Classic Tire Force is too strong!)
Tire Force 9 (Patch 2.5) with non-stock DFGT motor (Adjust for preference)
Deadzone Removal Range .05 (.00 CSR) Edit:8/1/2015 forgot about Karts DFGT .04Relative Adjust Gain 1.10
Relative Adjust Bleed 0.10
Relative Adjust Clamp 0.95
Soft Half 1.29
Soft Full 1.10
Low Speed Spring Saturation .17 (Adjust for preference with car stopped)
Edit: Steering Gain based off my wheel, 9 TF is 3, 15 TF is 2, and 29 TF for 1. (1.5) seems to produce better feel on my wheel.
Adjust for tire force and low speed spring saturation for feel! Example: Try to make the BMW 1-Series M Coupe, Ford Focus RS, or Mercedes A45 AMG feel as close as you can to your personal vehicle. Remember: "Superman ffb doesn't mean that you are getting things correct. You are probably losing key elements of the car ffb." Remember to thank Jack for his work! Edit:7/25/2015 see video at 7:55
Edit: FFB Motors in wheels. When it comes to the cheap brushed motors that are used in most wheels until now. We have the problem of my 9 could be 4 to 15 for someone else and with severe wear it could be ex: 30+. The DFGT under normal wear will probably have a 2-3 yr motor life span. Rally Games will increase the wear of these motors. I have been though G25 and DFGT motors. I refuse to use the CSR or GT3 with a rally, so my primary wheel of choice is the DFGT.
Jack Spade (66% SopLateral 1.7)
Wheel Settings GT3 / CSR / DFGT
Sen 900 or OFF / 900 or OFF / 900 DOR
FF 100 / 100 / 100 OES
Sho OFF / OFF
dri off / off
Abs 65-70 / 65-70 (CSR pedals clutch/brake inverted)
Lin 0 / 0
dea 0 / 0
spr off / off / 0 SES
dpr off / off / 0 DES
Check 0 CSS
Check Allow Game
Ingame (66% SopLateral 1.7)
FFB 100
Tire Force (GT3 User Preference / CSR 10 (Patch 2.5) /
DFGT 9 (Patch 2.5) with non-stock DFGT motor
Deadzone Removal Range 0 / 0 / .05
Relative Adjust Gain 1.10
Relative Adjust Bleed 0.10
Relative Adjust Clamp 0.95
Scoop Knee .70
Scoop Reduction .15
Soft Half 1.29
Soft Full 1.10
Low Speed Spring Saturation .17 DFGT
Post from PCARS forum
Jack Spade (66% SopLateral 1.7) Wheel Settings DFGT (or see below post #1767)
900 DOR
100 OES
0 SES
0 DES
Uncheck 0 CSS (if you play other games this can be checked)
Check Allow Game
Reset wheel Ingame works with 99-100/900 (Note almost the same settings with CSR)
Custom (not Default or Classic Tire Force is too strong!)
Tire Force 9 (Patch 2.5) with non-stock DFGT motor (Adjust for preference)
Deadzone Removal Range .05 (.00 CSR) Edit:8/1/2015 forgot about Karts DFGT .04Relative Adjust Gain 1.10
Relative Adjust Bleed 0.10
Relative Adjust Clamp 0.95
Soft Half 1.29
Soft Full 1.10
Low Speed Spring Saturation .17 (Adjust for preference with car stopped)
Edit: Steering Gain based off my wheel, 9 TF is 3, 15 TF is 2, and 29 TF for 1. (1.5) seems to produce better feel on my wheel.
Adjust for tire force and low speed spring saturation for feel! Example: Try to make the BMW 1-Series M Coupe, Ford Focus RS, or Mercedes A45 AMG feel as close as you can to your personal vehicle. Remember: "Superman ffb doesn't mean that you are getting things correct. You are probably losing key elements of the car ffb." Remember to thank Jack for his work! Edit:7/25/2015 see video at 7:55
Edit: FFB Motors in wheels. When it comes to the cheap brushed motors that are used in most wheels until now. We have the problem of my 9 could be 4 to 15 for someone else and with severe wear it could be ex: 30+. The DFGT under normal wear will probably have a 2-3 yr motor life span. Rally Games will increase the wear of these motors. I have been though G25 and DFGT motors. I refuse to use the CSR or GT3 with a rally, so my primary wheel of choice is the DFGT.
Last edited: