Need help with Qual to Race setup

Status
Not open for further replies.
Hi,

I am trying to learn (again) how to setup F1 cars after long time of not playing these games. I have a Qualifying setup for Bahrain and I want to do a non stop race in 28 lap race (50% dist). I know its rfactor and not GP4 but i figured that the setup principle is the same?

I know that each setup is individual but what do I need to change from Qual setup to do my non stop race as a rough guide?
I use full TC and ABS.
Its MMG 2007 mod if that helps.

here is my Qualifying setup:

//CGRightSetting=10//50.0:50.0
CGRearSetting=14//43.2:56.8 (weight distribution)

//FrontTireCompoundSetting=1//Hard
//RearTireCompoundSetting=1//Hard
FuelSetting=134//135L (32laps)
NumPitstopsSetting=0//0


[LEFTFENDER]
//FenderFlareSetting=0//1

[RIGHTFENDER]
//FenderFlareSetting=0//1

[FRONTWING]
FWSetting=/28

[REARWING]
RWSetting=/24

[BODYAERO]
RadiatorSetting=/2
BrakeDuctSetting=/1

[SUSPENSION]
FrontAntiSwaySetting=70//150 N/mm
RearAntiSwaySetting=2//22 N/mm
FrontToeInSetting=28//-0.30 deg
RearToeInSetting=36//0.10 deg
LeftCasterSetting=45//3.0 deg
RightCasterSetting=45//3.0 deg
Front3rdPackerSetting=13//1.3 cm
Front3rdSpringSetting=65//130 N/mm
Front3rdSlowBumpSetting=4//5
//Front3rdFastBumpSetting=2//3
//Front3rdSlowReboundSetting=4//5
//Front3rdFastReboundSetting=2//3
Rear3rdPackerSetting=19//1.9 cm
Rear3rdSpringSetting=50//100 N/mm
//Rear3rdSlowBumpSetting=6//7
//Rear3rdFastBumpSetting=2//3
//Rear3rdSlowReboundSetting=6//7
//Rear3rdFastReboundSetting=2//3

[CONTROLS]
SteerLockSetting=/15.5 deg
RearBrakeSetting=/53.8:46.2
BrakePressureSetting=/100%


[ENGINE]
//RevLimitSetting=19,000
EngineBrakingMapSetting=2

[DRIVELINE]
//FinalDriveSetting=1//14/52 (bevel 30/50)
//ReverseSetting=3//13/35 (16.667)
Gear1Setting=10//15/37 (15.270)
Gear2Setting=26//12/24 (12.381)
Gear3Setting=37//13/22 (10.476)
Gear4Setting=46//16/24 (9.286)
Gear5Setting=53//22/30 (8.442)
Gear6Setting=60//20/25 (7.738)
Gear7Setting=65//22/26 (7.316)
DiffPumpSetting=15//15%
DiffPowerSetting=0//0%
DiffCoastSetting=45//45%
DiffPreloadSetting=0//1


[FRONTLEFT]
CamberSetting=/-3.1 deg
PressureSetting=/109 kPa
//PackerSetting=/1.3 cm
SpringSetting=/82 N/mm
RideHeightSetting=/1.5 cm
SlowBumpSetting=/3
FastBumpSetting=/3
SlowReboundSetting=/5
FastReboundSetting=/5
//BrakeDiscSetting=/2.8 cm
//BrakePadSetting=/3

[FRONTRIGHT]
CamberSetting=/-3.2 deg
PressureSetting=/107 kPa
//PackerSetting=/1.3 cm
SpringSetting=/82 N/mm
RideHeightSetting=/1.5 cm
SlowBumpSetting=/3
FastBumpSetting=/3
SlowReboundSetting=/5
FastReboundSetting=/5
//BrakeDiscSetting=/2.8 cm
//BrakePadSetting=/3

[REARLEFT]
CamberSetting=/-2.3 deg
PressureSetting=/116 kPa
PackerSetting=0.7 cm
SpringSetting=/80 N/mm
RideHeightSetting=/3.5 cm
//SlowBumpSetting=/13
FastBumpSetting=/8
SlowReboundSetting=/12
FastReboundSetting=/8
//BrakeDiscSetting=/2.8 cm
//BrakePadSetting=/3

[REARRIGHT]
CamberSetting=/-2.3 deg
PressureSetting=/116 kPa
PackerSetting=/0.7 cm
SpringSetting=/80 N/mm
RideHeightSetting=/3.5 cm
//SlowBumpSetting=/13
//FastBumpSetting=/9
SlowReboundSetting=/12
FastReboundSetting=/8
//BrakeDiscSetting=/2.8 cm
//BrakePadSetting=/3

Thank you for your help!
 
I'm only familiar with the CTDP F1 mod, but basically I only change these things from qual to race (usually):

- Decrease boost and revlimit (seems you don't have this in your setup)
- Increase radiator size
- Increase brake duct setting
- Increase brake disk thickness
- Add fuel
- Harder tires

At least these are the important parameters to make sure the car lasts for a full 100% race.
 
If you just pick your qual setup and apply hard tires, that will do the trick.

I did a 30 lap race on Bahrain (mmg2007pe) and did the medium (softest I could attach) with 1 pitstop. All laptimes good and no issues with wear.

If you need I can upload my setup from that race. Me was the winning driver :skywalker:
 
Status
Not open for further replies.

Latest News

Are you buying car setups?

  • Yes

  • No


Results are only viewable after voting.
Back
Top